1983 Oldsmobile Firenza Steering and Chassis Parts
Find Your Specific 1983 Oldsmobile Firenza Steering and Chassis Parts
Below you will find various in-demand Oldsmobile Steering and Chassis Parts, components and accessories for your 1983 Firenza. Advance Auto Parts has popular Firenza parts like Tie Rods, Steering Shafts, Power Steering Parts and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Firenza model years including
1982,
1984,
1985,
1986,
1987,
1988 and more. Select a category of 1983 Oldsmobile Firenza Steering and Chassis Parts below and start saving instantly.
Popular 1983 Oldsmobile Firenza Steering and Chassis Parts Categories
Essential Steering and Chassis Parts for 1983 Oldsmobile Firenzas
Driveworks – Ball Joint (Part No.DW-K5273)
from
$17.49
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot provides extended temperature range and better wear resistance
- Test-proven stud material helps prevent premature stud failure
- Provides premium gauge steel construction for strength and durability
- Performance tested to ensure durability
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Driveworks – Steering Tie Rod End (Part No.DW-ES3372)
from
$29.49
When replaced, Driveworks tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts help ensure improved steering response and durability.
See More
Driveworks – Taper Bearing Set (Part No.S-A-5)
from
$10.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Powercraft – Pump Complete Rebuild Kit (Part No.8630)
from
$36.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Seal Kit (Part No.8554)
from
$21.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
MOOG – Alignment Shim Multi-Pack (Part No.K100264)
from
$20.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Construction and design validated by MOOG engineers
- Easy to install
- Shims provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- MOOG alignment parts can solve excessive tire wear and steering issues
MOOG – Tie Rod End Bushing (Part No.EV119)
from
$20.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Manufactured from high quality elastomer compounds for durability and ride performance
- Elastomer compounds do not utilize any reground rubber fillers
- Includes a bolt lock plate
Rare Parts – Rack & Pinion Bellows (Part No.RP27130)
from
$57.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Protects Rack & Pinion surfaces from contamination
- Hardware included
Whiteline – Sway Bar Link Bushing (Part No.W21014)
from
$23.99
Worn or deteriorated link bushings although small can have considerable influence over sway bar performance and more notably vehicle handling behaviour. Whiteline bushings are engineered to last and deliver improved driving performance.
Product Features:
See More
Product Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
CTR – Ball Joint (Part No.L2020186651CTR)
from
$28.99
Every CTR ball joint is engineered to restore the handling of your vehicle to original equipment condition.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
- Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
Whiteline – Sway Bar Link Washers (Part No.KW2)
from
$11.99
Has the thin galvanised metal washers on your OEM links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.
Product Features:
See More
Product Features:
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
MOOG – Camber Adjusting Kit (Part No.K928)
from
$23.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
National – Multi Purpose Seal (Part No.7013S)
from
$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Powercraft – Rack Pinion Seal Kit (Part No.8582)
from
$76.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Cardone New – New Rack and Pinion Hydraulic Transfer Tubing Assembly (Part No.3L-22108)
from
$86.99
CARDONE Rack and Pinion Transfer Tubing Assembly Kits include new components designed to meet OEM performance for form, fit, and function. All components necessary to complete the job are included to ensure your vehicle runs smoothly.
Product Features:
See More
Product Features:
- 100% new tubing and connectors to ensure long lasting performance.
- New seals are provided where applicable.
- All components are included to ensure your vehicle runs smoothly.
- Guaranteed fit and function.
- Meets or exceeds O.E.M performance.
Rare Parts – Tie Rod Sleeve (Part No.RP27222)
from
$31.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with clamps
- Used to set Toe in or out
- replaces rusted or corroded sleeves
- Used to connect inner and outer tie rod ends
Lares – Remanufactured Power Steering Pump (Part No.2302)
from
$64.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
MOOG – Control Arm and Ball Joint Assembly (Part No.CK620662)
from
$103.99
MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength durability and confidence is required.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)
from
$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
Carquest Premium – 3/8" ID Return Hose (sold by each) (Part No.34995)
from
$2.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Driveworks – Suspension Sway Bar Link Kit (Part No.DW-K6630)
from
$9.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
- Wrench flats at the base of the stud allow for the use of sockets for easy installation
MOOG – Alignment Shim (Part No.K995-1)
from
$9.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Driveworks – Steering Tie Rod End (Part No.DW-ES2216R)
from
$8.49
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing from specific materials provides strength and durability to prevent breakage
- Coated technology provides a smooth and durable surface to prevent corrosion and rust
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
- A slotted nut and cotter pin for a more secure installation
Carquest Premium – Steering Column Housing Repair Kit (Part No.CSE1461)
from
$31.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Cardone – New Power Steering Filter (Part No.20-0038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element.
- Patented built-in bypass that filters up to 190 micron particles.
- Designed to extend the life of the steering system.
- Sure-grip barb connections are included to ensure proper hose fitment.
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Upgrade your 1983 Oldsmobile Firenza with Top-Quality Steering and Chassis Parts
When it comes to maintaining or upgrading your 1983 Oldsmobile Firenza, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Firenza functioning at its best. At Advance Auto Parts, we offer a wide selection of 68 Steering and Chassis Parts for the 1983 Oldsmobile Firenza, designed to meet your needs without breaking the bank.
From
Tie Rod
replacements to
Steering Shafts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1983 Oldsmobile Firenza at great prices.
Our Steering and Chassis Parts inventory for this model
ranges from just $2.99 to $434.99, with
an average price of $39.10.
Our 68 Steering and Chassis Parts in stock come from 16 trusted brands, so you’re sure to find the right part for your 1983 Oldsmobile Firenza without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1983 Oldsmobile Firenza, we stock popular OEM and aftermarket Steering and Chassis Parts from top names
like Imperial, Driveworks, Cardone, and more.
Imperial Steering and Chassis Parts
start at just $11.49 and boast an impressive 4 stars average rating from customers.
Driveworks and Cardone also bring quality to the table, with Steering and Chassis Parts available starting at $5.79, and at an average 4 stars rating.
With 4,112 customer reviews and counting, our 1983 Oldsmobile Firenza Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1983 Oldsmobile Firenza is always ready to roll. We’re committed to providing you with everything you need to keep your Firenza in top shape, all in one place.
Start shopping confidently below for your 1983 Oldsmobile Firenza!
Best-Selling Tie Rods for 1983 Oldsmobile Firenzas
Enhance the driving experience in your Oldsmobile with 16 quality Tie Rod components, starting at $5.79.
Driveworks – Steering Tie Rod End (Part No.DW-ES2216R)
from
$8.49
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing from specific materials provides strength and durability to prevent breakage
- Coated technology provides a smooth and durable surface to prevent corrosion and rust
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
- A slotted nut and cotter pin for a more secure installation
Driveworks – Steering Tie Rod End (Part No.DW-ES2217R)
from
$8.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing from specific materials provides strength and durability to prevent breakage
- Coated technology provides a smooth and durable surface to prevent corrosion and rust
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
- A slotted nut and cotter pin for a more secure installation
Driveworks – Steering Tie Rod End (Part No.DW-ES3372)
from
$29.49
When replaced, Driveworks tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts help ensure improved steering response and durability.
See More
Driveworks – Tie Rod End (Part No.DW-ES3371)
from
$24.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Driveworks – Steering Tie Rod End Bushing (Part No.DW-EV119)
from
$5.79
Driveworks tie rod end bushings are high-quality, cost-effective parts, and they provide mobility to the joint as you turn your steering wheel. Worn bushings can dramatically affect your wheel alignment. Driveworks chassis parts ensure improved steering response and durability.
See More
Driveworks – Tie Rod Bushing (Part No.DW-K6531B)
from
$15.99
Tie Rod Bushing
MOOG – Tie Rod End Bushing (Part No.EV119)
from
$20.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Manufactured from high quality elastomer compounds for durability and ride performance
- Elastomer compounds do not utilize any reground rubber fillers
- Includes a bolt lock plate
MOOG – Steering Tie Rod End Bushing Kit (Part No.K6677)
from
$21.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Includes all necessary components
- Includes a bolt lock plate
- Bushings snap into place with little effort, saving installation time
- Two-piece design eliminates special tools and lubrication required to install OE one-piece design
Rare Parts – Tie Rod End (Part No.RP26497)
from
$37.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod Sleeve (Part No.RP27222)
from
$31.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with clamps
- Used to set Toe in or out
- replaces rusted or corroded sleeves
- Used to connect inner and outer tie rod ends
Cardone – Inner Tie Rod End Repair Kit (Part No.22-K100)
from
$30.49
CARDONE Inner Tie Rod End Kits help to eliminate front-end vibration, shimmying and unsafe handling. Each kit includes new components designed to meet or exceed OEM performance, ensuring improved steering response and reducing improper tire wear.
Product Features:
See More
Product Features:
- No special tools or lubrication are required for ease of installation
- All components, including steel inserts, flat washers, bolt spacers, bolts and retainers, are included to do the job right
- 100% new bushing kit ensures long lasting performance
- All components included for center take off repair
- Kits are application specific so you can get the right components for your vehicle
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Rare Parts – Tie Rod End (Part No.RP26496)
from
$29.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Dorman – Steering Tie Rod Bushing (Part No.533-600)
from
$10.99
This steering tie rod bushing is precision-engineered and rigorously tested to provide reliable replacement for the original part on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this steering tie rod end bushing has been built to match the fit and function of the stock part on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Most Popular 1983 Oldsmobile Firenza Steering Shafts
Customize your Oldsmobile with 2 Steering Shafts products
like Steering Shaft Bearings and
Pump Shaft Seals, all
priced under $18.99.
Driveworks – Taper Bearing Set (Part No.S-A-5)
from
$10.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.7013S)
from
$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Top Picks for 1983 Oldsmobile Firenza Power Steering Parts
Upgrade Oldsmobile Firenzas with top-quality Power Steering Parts parts, including 31 OEM and aftermarket selections for your 1983 model.
Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)
from
$13.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Cardone – Power Steering Filter (Part No.20-0058F)
from
$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-0012F)
from
$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Imperial – Mounting Kit System (Part No.226201)
from
$11.49
Product Features:
See More
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Atermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Carquest Premium – 3/8" I.D. Return Hose CPE (Part No.36219)
from
$38.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Cardone – New Power Steering Filter (Part No.20-0038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element.
- Patented built-in bypass that filters up to 190 micron particles.
- Designed to extend the life of the steering system.
- Sure-grip barb connections are included to ensure proper hose fitment.
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Quick Connect Coupler (Part No.240250)
from
$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Carquest Premium – 3/8" ID Return Hose (sold by each) (Part No.34995)
from
$2.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Cardone – Power Steering Filter (Part No.20-P038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$31.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Powercraft – Upper Pinion Bearing Kit (Part No.8571)
from
$34.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-108)
from
$124.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.
Product Features:
See More
Product Features:
- Protective coating applied to each unit to extend the life of the unit (where applicable).
- 100% performance testing to ensure perfect fit, function and reliable performance.
- 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
- 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
- Valve housings have polished micro-finish sleeves for durability (where applicable).
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Cardone New – New Rack and Pinion Hydraulic Transfer Tubing Assembly (Part No.3L-22108)
from
$86.99
CARDONE Rack and Pinion Transfer Tubing Assembly Kits include new components designed to meet OEM performance for form, fit, and function. All components necessary to complete the job are included to ensure your vehicle runs smoothly.
Product Features:
See More
Product Features:
- 100% new tubing and connectors to ensure long lasting performance.
- New seals are provided where applicable.
- All components are included to ensure your vehicle runs smoothly.
- Guaranteed fit and function.
- Meets or exceeds O.E.M performance.
Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.36686)
from
$81.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Powercraft – Rack Pinion Seal Kit (Part No.8581)
from
$77.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Rack Pinion Seal Kit (Part No.8582)
from
$76.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Pressure Tube Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.36216)
from
$67.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Lares – Remanufactured Power Steering Pump (Part No.2302)
from
$64.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Cardone – Remanufactured Power Steering Pump (Part No.20-872)
from
$63.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Rare Parts – Rack & Pinion Bellows (Part No.RP27130)
from
$57.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Protects Rack & Pinion surfaces from contamination
- Hardware included
Powercraft – Pump Complete Rebuild Kit (Part No.8630)
from
$36.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.35827)
from
$35.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Powercraft – Lower Pinion Bearing Kit (Part No.8572)
from
$31.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
BBB Industries – Power Steering Filter (Part No.991-FLT4)
BBB Industries – Power Steering Filter (Part No.991-FLT2)
BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)
from
$28.99
POWER STEERINGFILTER
Powercraft – Pump Seal Kit (Part No.8631)
from
$14.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)
from
$6.99
POWER STEERINGFILTER
In-Demand Ball Joints for 1983 Oldsmobile Firenzas
Select from 6 premium Ball Joints parts for your 1983 Oldsmobile Firenza, with prices ranging from $17.49 to $129.99.
Driveworks – Ball Joint (Part No.DW-K5273)
from
$17.49
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot provides extended temperature range and better wear resistance
- Test-proven stud material helps prevent premature stud failure
- Provides premium gauge steel construction for strength and durability
- Performance tested to ensure durability
ACDelco – Professional Ball Joint (Part No.L2020588371ACD)
from
$82.88
ACDelco ball joints are designed for easier steering. ACDelco chooses the best design for the application, often incorporating advanced technology some competitors don’t match.
Product Features:
See More
Product Features:
- Superb strength and durability thanks to precision manufactured housing and components
- Advanced corrosion protection against the harshest conditions
- Permanently attached boot reduces contamination, makes installation easier
- Full ball stud and patented two-piece cylindrical wedge bearing for tighter overall fit and fatigue resistance
- No spring means no end play, easier installation
- One-piece forged housing for easier steering
Dorman – Suspension Control Arm (Part No.520-154)
from
$129.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm (Part No.520-153)
from
$84.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Rare Parts – Ball Joint (Part No.RP10442)
from
$64.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
CTR – Ball Joint (Part No.L2020186651CTR)
from
$28.99
Every CTR ball joint is engineered to restore the handling of your vehicle to original equipment condition.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
- Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
Most Sold 1983 Oldsmobile Firenza Sway Bars
Explore our best-selling Oldsmobile parts for the 1983 Firenza among 5 OEM and aftermarket options starting from $11.99.
MOOG – Stabilizer Bar Link Kit (Part No.K5252)
from
$14.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Incorporates proven design and engineering features
MOOG – Stabilizer Bar Link Kit (Part No.K700532)
from
$18.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- The Grade 8 coated bolt makes the link extremely durable
- Features an enhanced solid hex spacer of strong, lightweight, anodized T-6 aluminum to resist corrosion
- Heavy-duty bushings made from new urethane material are extremely durable, absorbing road shocks while resisting oil, heat and ozone
- Bushings feature new patent-pending stress reliefs to improve durability and sensitivity to installation torque
- Black phosphate barrel nut and washers provide corrosion protection.
Driveworks – Suspension Stabilizer Bar Link Kit (Part No.DW-K5252)
from
$11.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
- Wrench flats at the base of the stud allow for the use of sockets for easy installation
Whiteline – Sway Bar Link Bushing (Part No.W21014)
from
$23.99
Worn or deteriorated link bushings although small can have considerable influence over sway bar performance and more notably vehicle handling behaviour. Whiteline bushings are engineered to last and deliver improved driving performance.
Product Features:
See More
Product Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Whiteline – Sway Bar Link Washers (Part No.KW2)
from
$11.99
Has the thin galvanised metal washers on your OEM links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.
Product Features:
See More
Product Features:
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Top-Rated Steering and Chassis Parts Brands For Your 1983 Oldsmobile Firenza
Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1983 Oldsmobile Firenzas. Below you’ll find some of our best rated Steering and Chassis Parts from Imperial, Driveworks, and Cardone, and more. Steering and Chassis Parts from these brands that fit a 1983 Firenza start at just $5.79 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Imperial 1983 Oldsmobile Firenza Steering and Chassis Parts
When it comes to maintaining or upgrading your 1983 Oldsmobile Firenza, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Steering and Chassis Parts, specifically designed for the 1983 Oldsmobile Firenza. With over 5 Imperial brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $20.95. Plus, with over 211 customer reviews and an average rating of 4 stars, you can trust that our Imperial Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$11.49
$11.49
(27)
“Perfect for my transmission cooler holds it very good in place”
Popular Driveworks 1983 Oldsmobile Firenza Steering and Chassis Parts
Driveworks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 1983 Oldsmobile Firenza owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1983 Firenza, Advance Auto Parts carries a full inventory of 9 Driveworks Steering and Chassis Parts. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Driveworks Steering and Chassis Parts range from $5.79 to $29.49, plus, with more than 193 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.
FAQs for 1983 Oldsmobile Firenza Steering and Chassis Parts
Which Steering and Chassis Parts are best-sellers for 1983 Oldsmobile Firenzas?
Out of 68 Steering and Chassis Parts that fit 1983 Oldsmobile Firenzas, the following parts are the top sellers:
- Taper Bearing Set (5050529) – $10.29
- New Power Steering Filter (10417593) – $31.99
- 3/8" ID Return Hose (sold by each) (18070570) – $2.99
What’s the price range for 1983 Oldsmobile Firenza Steering and Chassis Parts?
Steering and Chassis Part prices for the 1983 Oldsmobile Firenza start at $2.99 and go up to $434.99 for the most premium parts.
What’s the average price of a Steering and Chassis Part for a 1983 Oldsmobile Firenza?
The average price for Steering and Chassis Parts for the 1983 Oldsmobile Firenza is $39.10. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Steering and Chassis Parts for other Oldsmobile Firenza model years?
What are the cheapest Steering and Chassis Parts for my 1983 Oldsmobile Firenza?
The cheapest 1983 Oldsmobile Firenza Steering and Chassis Parts we carry in stock are:
- 3/8" ID Return Hose (sold by each) (18070570) – $2.99
- Steering Tie Rod End Bushing (15520464) – $5.79
- Tie Rod Dust Boot (22906873) – $5.99
- Tie Rod Dust Boot (22906874) – $5.99
- POWER STEERINGFILTER (50167394) – $6.99
What are the top-rated Steering and Chassis Parts that fit the 1983 Oldsmobile Firenza?
Out of 4,112 reviews by customers, our 1983 Oldsmobile Firenza Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1983 Oldsmobile Firenza and their top-rated products:
- Sway Bars
- Stabilizer Bar Link Kit (10575041) – $18.49
- Stabilizer Bar Link Kit (20973467) – $14.49
- Suspension Stabilizer Bar Link Kit (15510341) – $11.99
- Tie Rods
- Stabilizer Bar Link Kit (10575041) – $18.49
- Stabilizer Bar Link Kit (20973467) – $14.49
- Suspension Stabilizer Bar Link Kit (15510341) – $11.99
What types of Steering and Chassis Parts do you sell for my 1983 Oldsmobile Firenza?
As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 1983 Oldsmobile Firenza:
Can I get help with 1983 Oldsmobile Firenza Steering and Chassis Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Steering and Chassis Parts and more.
What is your return policy for Oldsmobile Firenza Steering and Chassis Parts?
Advance Auto Parts keeps returns simple. For new Oldsmobile Firenza Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
