1983 Oldsmobile Cutlass Transmission Parts

Below you will find various in-demand Oldsmobile Transmission Parts, components and accessories for your 1983 Cutlass. Advance Auto Parts has popular Cutlass parts like Automatic Transmission Parts, Transmission Mounts, Transmission Seals and more. You’ll also find aftermarket and OEM Transmission Parts for other Cutlass model years including 1978, 1979, 1980, 1981, 1982, 1988, 1997, 1998, 1999 and more. Select a category of 1983 Oldsmobile Cutlass Transmission Parts below and start saving instantly.

Popular 1983 Oldsmobile Cutlass Transmission Parts Categories

Gear Shift Levers

Transmission Torque Converters

OE Transmission Coolers

Transmission Solenoids

Transmission Oil Cooler Lines

Transmission Shift Cables

Manual Transmission Output Shaft Bearings

Transmission Pan Gaskets

Automatic Transmission Line Connectors

Pinion Bearings

Transmission Mounts

Transmission Master Repair Kits

Transmission Rebuild Kits

Transmission Oil Pan Gaskets

Automatic Transmission Wiring Harness

Transmission Bushings

Detent Cables

Automatic Transmission Oil Pump Seals

Transmission Modulator Valves

Pinion Seals

Neutral Safety Switch Connectors

Automatic Transmission Dipstick Seals

Transmission Seals and O-rings

Automatic Transmission Kickdown Cable Brackets

Automatic Transmission Extension Housing Seal Kits

Torque Converter Seals

Extension Housing Seals

Manual Transmission Output Shaft Seals

Transmission Crossmembers

Transmission Shift Kits

Transmission Bands

Automatic Transmission Selector Shaft Seals

Automatic Transmission Detent Cable Seals

Automatic Transmission Oil Pump Gaskets

Automatic Transmission Fluid Filler Tube Seals

Automatic Transmission Oil Pump O-Rings

Automatic Transmission Speedometer Pinion Seals

Automatic Transmission Seals

Automatic Transmission Shifter Cable Brackets

Torque Converter Bearings

Automatic Transmission Friction Discs

Manual Transmission Countershaft Bearing Set

Essential Transmission Parts for 1983 Oldsmobile Cutlasses

from

$3.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$207.99

AT MASTER REPAIR KIT

from

$14.79

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission line fitting kit
GM, Jeep; 5/8″-18 inverted flare
Helps simplify transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines
Crafted from high-quality material that makes it durable and longer-lasting
A high quality, direct fit OE replacement
Easily connects the transmission cooler line to the cooler hose
Coated for extra protection against corrosion
Crafted from high-quality material that makes it durable and longer-lasting
A high quality, direct fit OE replacement
Easily connects the transmission cooler line to the cooler hose
Coated for extra protection against corrosion

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$34.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

Quick Link Splice Connectors

from

$3.99

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$27.99

AUTO TRANS BAND

from

$1149.99

Hays Race Tq Convtr Th400 32-3600 Stall

from

$33.99

Fully adjustable vacuum modulator to maintain accurate shift points.

Product Features:

Meets or exceeds OE fit, form and function

from

$96.99

AT OVERHAUL KIT

from

$9.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$8.99

AT SEL SHAFT SEAL

from

$7.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$3.99

AT SOLENOID SEAL

from

$19.99

Product Features:

Edelbrock Part # 8026 GM Transmission adapter is for use with 2004R, 700R4, 4L60 transmissions.
This kit relocates the pin position on an Edelbrock Carburetor when hooking up to a throttle valve style transmission (700R4, 2004R, 4L60).
The pin location is critical as the TV controls line pressure, shift points, shift firmness, and part throttle downshifts.

from

$130.99

B&M Deep Transmission Pans increase the fluid capacity of your transmission, improving the cooling, allowing your transmission to work as efficiently as possible. Included drain plug, eliminates the need to drop the pan to drain the fluid.

Product Features:

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs
Chrome Plated Steel

from

$40.99

REUSABLE AT PAN GSKT

from

$8.99

AT OIL PUMP ORING

from

$299.99

The B&M Unimatic is an ideal replacement for column shift vehicles, includes neutral safety switch, 5 foot cable and a boot and plate.

Product Features:

Ideal As Column Shift Replacement
Includes Neutral Safety Switch
Includes Black T-Handle
Backup Light Not Available
Includes 5 ft. Cable and Hardware
Includes Boot and Plate

from

$62.99

This neutral safety switch connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this neutral safety switch connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$7.29

This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$48.99

AT/HARNESS VSS REPR

from

$5.99

AT DPSTK TUBE SEAL

from

$8.99

AT EXT HOUSING SEAL

from

$162.99

The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.

Product Features:

Recalibrate Auto. Transmission
Optimum Performance
Select Your App. Mode
Improves Transmission Life
Trans. Removal Not Required
Downshift At Any Speed
Great For Trailer Towing
For Heavy Loads Driving Downhill

from

$80.99

Exhaust

from

$8.29

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 66-73; CHEV 58-84; GMC 67-84; OLDS 68-72; PONT 61-77;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1958-1984
Weight approx: 2 Lbs
RUBBER CROWN WITH AIR GAP
HEIGHT WITHOUT STUDS: 1.9 INCH: 48.25 MM
STUDS AND BOLT HOLES INLINE
STUD CENTERLINE: 1.5 INCH: 38.1 MM

from

$16.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Upgrade your 1983 Oldsmobile Cutlass with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1983 Oldsmobile Cutlass, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Transmission Parts are key to keeping your Cutlass functioning at its best. At Advance Auto Parts, we offer a wide selection of 100 Transmission Parts for the 1983 Oldsmobile Cutlass, designed to meet your needs without breaking the bank. From Automatic Transmission Part replacements to Transmission Mounts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1983 Oldsmobile Cutlass at great prices. Our Transmission Parts inventory for this model ranges from just $2.99 to $899.99, with an average price of $142.86. Our 100 Transmission Parts in stock come from 14 trusted brands, so you’re sure to find the right part for your 1983 Oldsmobile Cutlass without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1983 Oldsmobile Cutlass, we stock popular OEM and aftermarket Transmission Parts from top names like National, B & M, Imperial, and more. National Transmission Parts start at just $6.99 and boast an impressive 4.3 stars average rating from customers. B & M and Imperial also bring quality to the table, with Transmission Parts available starting at $33.99, and at an average 4.1 stars rating. With 615 customer reviews and counting, our 1983 Oldsmobile Cutlass Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1983 Oldsmobile Cutlass is always ready to roll. We’re committed to providing you with everything you need to keep your Cutlass in top shape, all in one place. Start shopping confidently below for your 1983 Oldsmobile Cutlass!

Best-Selling Automatic Transmission Parts for 1983 Oldsmobile Cutlasses

Enhance the driving experience in your Oldsmobile with 22 quality Automatic Transmission Part components, starting at $3.99.

show more show less

from

$3.99

AT SOLENOID SEAL

from

$34.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

Quick Link Splice Connectors

from

$33.99

Cable Bracket, GM APPLICATION: For TH400, 350, 250, 200, 700R4, 2004R transmissions.

Product Features:

Shifter Service Parts

from

$34.49

Fully adjustable vacuum modulator to maintain accurate shift points.

Product Features:

Meets or exceeds OE fit, form and function

from

$33.99

Fully adjustable vacuum modulator to maintain accurate shift points.

Product Features:

Meets or exceeds OE fit, form and function

from

$7.99

ATP Detent Cable End repair damaged or bent end clips found on 1980-96 General Motors applications.

Product Features:

Saves money by allowing cable repair instead of replacement.
Easy to use

from

$34.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

Quick Link Connector
Anti-Clogging Design

from

$19.99

Product Features:

Edelbrock Part # 8026 GM Transmission adapter is for use with 2004R, 700R4, 4L60 transmissions.
This kit relocates the pin position on an Edelbrock Carburetor when hooking up to a throttle valve style transmission (700R4, 2004R, 4L60).
The pin location is critical as the TV controls line pressure, shift points, shift firmness, and part throttle downshifts.

from

$10.99

This brake pedal bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake pedal bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.99

AT OIL PUMP ORING

from

$11.99

AT FRT PUMP BUSHING

from

$61.99

ATP Automatic Transmission Control Solenoid (Lock-Up)

from

$48.99

AT MODULATOR VALVE

from

$17.99

AT MODULATOR VALVE

from

$10.99

AT FRT PUMP BUSHING

from

$26.99

Detent cables connect the throttle mechanism to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Detent cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Includes brackets, grommets, etc to match original
Helps transmission determine ideal downshift
Improves vehicle performance

from

$111.99

AT CONTR SOLENOID

from

$80.99

Exhaust

from

$27.99

AUTO TRANS BAND

from

$24.99

AT CLUTCH PLATE

from

$9.99

AT CLUTCH PLATE

from

$6.99

AT CLUTCH PLATE

Most Popular 1983 Oldsmobile Cutlass Transmission Mounts

Customize your Oldsmobile with 2 Transmission Mounts products like Transmission Mounts, all priced under $9.79.

show more show less

from

$6.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 77-82; CHEV 78-05; GMC 81-99; OLDS 78-83; PONT 75-93;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1975-2005
Weight approx: 1 Lbs
HEIGHT: 1.95 INCH / 49.53 MM WITHOUT STUD
STUD AND BOLT HOLES INLINE
STUD: M10-1.50
MOUNT HOLES: 3.75 INCH / 95.25 MM

from

$9.79

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 70-93; CADI 76-80; CHEV 65-93; GMC 73-87; OLDS 68-92; PONT 70-89;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1965-1993
Weight approx: 1 Lbs
HEIGHT: 1.85 INCH / 47 MM WITHOUT STUD
STUD AND BOLT HOLES INLINE
STUD: M10-1.5, 28 MM
MOUNT HOLES: 4.0 INCH / 101.6 MM ELONGATED

Top Picks for 1983 Oldsmobile Cutlass Transmission Seals

Upgrade Oldsmobile Cutlasses with top-quality Transmission Seals parts, including 16 OEM and aftermarket selections for your 1983 model.

show more show less

from

$12.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$8.99

AT SEL SHAFT SEAL

from

$19.99

AT OIL PUMP SEAL

from

$7.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$5.99

AT DPSTK TUBE SEAL

from

$6.99

Product Features:

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$15.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$5.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$3.99

AT DETENT CABLE SEAL

from

$12.29

AT EXT HOUSING SEAL

from

$8.99

AT EXT HOUSING SEAL

from

$2.99

Product Features:

ATP Transmission Seals And Gaskets are exact fit, no compromise replacement parts

from

$3.99

AT DETENT CABLE SEAL

from

$9.99

AT SPEED PINION SEAL

from

$5.99

AT SEAL

In-Demand Transmission Bearings for 1983 Oldsmobile Cutlasses

Select from 3 premium Transmission Bearings parts for your 1983 Oldsmobile Cutlass, with prices ranging from $8.79 to $15.29.

show more show less

from

$10.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$15.29

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$8.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

Most Sold 1983 Oldsmobile Cutlass Transmission Cooler and Parts

Explore our best-selling Oldsmobile parts for the 1983 Cutlass among 10 OEM and aftermarket options starting from $25.99.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

Product Features:

Imperial Maxi-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$85.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
33% more efficient than a comparable tube and fin design

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$83.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$67.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

Top-Rated Transmission Parts Brands For Your 1983 Oldsmobile Cutlass

Shop for the best-rated brands offering Transmission Parts and other products for your 1983 Oldsmobile Cutlasses. Below you’ll find some of our best rated Transmission Parts from National, B & M, and Imperial, and more. Transmission Parts from these brands that fit a 1983 Cutlass start at just $6.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 1983 Oldsmobile Cutlass Transmission Parts

When it comes to maintaining or upgrading your 1983 Oldsmobile Cutlass, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 1983 Oldsmobile Cutlass. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $12.32. Plus, with over 43 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $6.99

(5)

Multi-Purpose Seal

“This part was exactly the same as the part on my 2004 Trailblazer 4.2L, even had the same number stamped on it.”

from $16.99

(25)

Multi-Purpose Bearing

“Smooth”

from $12.99

(13)

Multi-Purpose Seal

“Fixed my leak”

Popular B & M 1983 Oldsmobile Cutlass Transmission Parts

B & M auto parts is one of the highest quality Transmission Part brands in the market. Any 1983 Oldsmobile Cutlass owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1983 Cutlass, Advance Auto Parts carries a full inventory of 3 B & M Transmission Parts. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these B & M Transmission Parts range from $33.99 to $362.99, plus, with more than 3 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $47.99

(1)

Shifter Accessories, Bracket and Lever Kit Fits TH400/TH350/TH250/200-4R/700R4

“Cable not perfectly straight. It is hard to believe as long as B&M and th400s have been around, that they do not line up better”

from $33.99

(1)

Cable Bracket

“Use it for a 700R4 swap, need to use B & M cable to fit”

from $362.99

(1)

Automatic Shifter, Sport Shifter

“This is a sweetly made product with that hotrod look and feel.This shifter was easy to install and a knock out to drive.No down falls as far as I’m aw”

FAQs for 1983 Oldsmobile Cutlass Transmission Parts

Which Transmission Parts are best-sellers for 1983 Oldsmobile Cutlasses?

Out of 100 Transmission Parts that fit 1983 Oldsmobile Cutlasses, the following parts are the top sellers:

Taper Bearing Set (5050537) – $10.99
Multi-Purpose Bearing (3275973) – $16.99
Multi-Purpose Seal (3271668) – $7.99

What’s the price range for 1983 Oldsmobile Cutlass Transmission Parts?

Transmission Part prices for the 1983 Oldsmobile Cutlass start at $2.99 and go up to $899.99 for the most premium parts.

What’s the average price of a Transmission Part for a 1983 Oldsmobile Cutlass?

The average price for Transmission Parts for the 1983 Oldsmobile Cutlass is $142.86. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Oldsmobile Cutlass model years?

Yes, we currently carry Transmission Parts for 25 model years of Oldsmobile Cutlasses between 1961 and 1999. Transmission Parts are bought most frequently for the following model years: 1999, 1998, 1997, 1988, 1982, 1981, 1980, 1979, and 1978.

What are the cheapest Transmission Parts for my 1983 Oldsmobile Cutlass?

The cheapest 1983 Oldsmobile Cutlass Transmission Parts we carry in stock are:

Automatic Transmission Speedometer Pinion Seal (11236107) – $2.99
Oil Seal (5440149) – $3.99
AT SOLENOID SEAL (11239035) – $3.99
AT DETENT CABLE SEAL (10861026) – $3.99
AT DETENT CABLE SEAL (10861007) – $3.99

What are the top-rated Transmission Parts that fit the 1983 Oldsmobile Cutlass?

Out of 615 reviews by customers, our 1983 Oldsmobile Cutlass Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1983 Oldsmobile Cutlass and their top-rated products:

Automatic Transmission Pan and Gaskets
- Transmission Oil Pan Gasket 16 Bolt Hole One Piece Gasket (5723817) – $16.99
- Transmission Oil Pan Gasket 13 Bolt Hole One Piece Gasket (5181054) – $9.49
- Chrome Deep Transmission Pan For TH 350 Transmission (17130016) – $133.99
Transmission Connectors
- Transmission Oil Pan Gasket 16 Bolt Hole One Piece Gasket (5723817) – $16.99
- Transmission Oil Pan Gasket 13 Bolt Hole One Piece Gasket (5181054) – $9.49
- Chrome Deep Transmission Pan For TH 350 Transmission (17130016) – $133.99
Transmission Cooler and Parts
- Transmission Oil Pan Gasket 16 Bolt Hole One Piece Gasket (5723817) – $16.99
- Transmission Oil Pan Gasket 13 Bolt Hole One Piece Gasket (5181054) – $9.49
- Chrome Deep Transmission Pan For TH 350 Transmission (17130016) – $133.99

What types of Transmission Parts do you sell for my 1983 Oldsmobile Cutlass?

As of 11/2/25, these are some of the most in-demand types of Transmission Parts for a 1983 Oldsmobile Cutlass:

Can I get help with 1983 Oldsmobile Cutlass Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Transmission Parts and more.

What is your return policy for Oldsmobile Cutlass Transmission Parts?

Advance Auto Parts keeps returns simple. For new Oldsmobile Cutlass Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1983 Oldsmobile Cutlass Transmission Parts

Driveworks – Oil Seal (Part No.S-3227)

ATP – AT MASTER REPAIR KIT (Part No.XM-5)

Imperial – Transmission Line Fitting Kit (Part No.240390)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242016)

Pro-King – Automatic Transmission Solenoid (Part No.52-0203)

Motive Gear – Differential Pinion Seal (Part No.2043)

ATP – AUTO TRANS BAND (Part No.CX-32)

Hays – Hays Race Tq Convtr Th400 32-3600 Stall (Part No.97-1D32F)

Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-28)

ATP – AT OVERHAUL KIT (Part No.SGS-28)

Felpro – Transmission Oil Pan Gasket 13 Bolt Hole One Piece Gasket (Part No.TOS 18621)

ATP – AT SEL SHAFT SEAL (Part No.SO-19)

National – Multi-Purpose Seal (Part No.9613S)

ATP – AT SOLENOID SEAL (Part No.JO-15)

Edelbrock – Automatic Trans Cable Adapter #8026 for GM 2004R, 700R4, 4L60 Transmissions (Part No.8026)

B & M – DEPTH PAN CHROME HP (Part No.20289)

ATP – REUSABLE AT PAN GSKT (Part No.JG-138)

ATP – AT OIL PUMP ORING (Part No.SO-21)

B & M – Automatic Shifter, Unimatic Shifter (Part No.80775)

Dorman – 4 Wire Multipurpose Connector (Part No.645-578)

Dorman – Clutch Pilot Bushing (Part No.690-014.1)

ATP – AT/HARNESS VSS REPR (Part No.JE-15)

ATP – AT DPSTK TUBE SEAL (Part No.SO-35)

ATP – AT EXT HOUSING SEAL (Part No.JO-57)

B & M – Transpak For 65-87 TH400 Transmission (Part No.20228)

Hooker Headers – Exhaust (Part No.12647HKR)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2268)

National – Multi-Purpose Bearing (Part No.A-6)

ATP – AT SOLENOID SEAL (Part No.JO-15)

Pro-King – Automatic Transmission Solenoid (Part No.52-0203)

B & M – Cable Bracket (Part No.30499)

Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-48)

Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-28)

ATP – Automatic Transmission Detent Cable End (Part No.YR-100)

Pro-King – Automatic Transmission Solenoid (Part No.52-0210)

Edelbrock – Automatic Trans Cable Adapter #8026 for GM 2004R, 700R4, 4L60 Transmissions (Part No.8026)

Dorman – Help – Brake and Clutch Bushings (Part No.74016)

ATP – AT OIL PUMP ORING (Part No.SO-21)

ATP – AT FRT PUMP BUSHING (Part No.CB-30)

ATP – ATP Automatic Transmission Control Solenoid (Lock-Up) (Part No.CE-1)

ATP – AT MODULATOR VALVE (Part No.JX-76)

ATP – AT MODULATOR VALVE (Part No.JX-66)

ATP – AT FRT PUMP BUSHING (Part No.CB-4)

ATP – Automatic Transmission Detent Cable (Part No.Y-224)

ATP – AT CONTR SOLENOID (Part No.SE-1)

Hooker Headers – Exhaust (Part No.12647HKR)

ATP – AUTO TRANS BAND (Part No.CX-32)

ATP – AT CLUTCH PLATE (Part No.CC-22)

ATP – AT CLUTCH PLATE (Part No.SC-26)

ATP – AT CLUTCH PLATE (Part No.SC-30)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2392)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2360)

National – Multi-Purpose Seal (Part No.4583)

National – Multi-Purpose Seal (Part No.5200)

ATP – AT SEL SHAFT SEAL (Part No.SO-19)

ATP – AT OIL PUMP SEAL (Part No.CO-37)

National – Multi-Purpose Seal (Part No.9613S)

ATP – AT DPSTK TUBE SEAL (Part No.SO-35)

National – Multi Purpose Seal (Part No.8792S)

National – Multi-Purpose Seal (Part No.8610)

Driveworks – Oil Seal (Part No.S-8610)

ATP – AT DETENT CABLE SEAL (Part No.SO-37)

ATP – AT EXT HOUSING SEAL (Part No.HO-9)

ATP – AT EXT HOUSING SEAL (Part No.SO-22)

ATP – Automatic Transmission Speedometer Pinion Seal (Part No.SO-13)

ATP – AT DETENT CABLE SEAL (Part No.SO-36)

ATP – AT SPEED PINION SEAL (Part No.SO-34)

ATP – AT SEAL (Part No.SO-39)

Driveworks – Taper Bearing Set (Part No.S-A-6)

National – Bearing (Part No.M86649)

Driveworks – Taper Bearing Cone (Part No.S-M-86649)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243012)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.241018)

Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)