1983 Nissan Sentra Body Parts
More 1983 Nissan Sentra Body Parts Categories
If you’re looking for an original Body Parts replacement for a 1983 Nissan Sentra, you can search through our selection below. You’ll also find aftermarket and OEM Body Parts to meet your needs.
Essential 1983 Nissan Sentra Body Parts
Carquest Premium – Door Jamb Switch (Part No.SAA1342)
from
$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Door Jamb Switch (Part No.SBA3537)
from
$17.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Niles – Door Contact Switch (Part No.O3150253914NIL)
from
$25.38
Door Contact Switch
Carquest – Door Jamb Switch (Part No.S1107)
from
$55.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Our parts are 100% tested to verify both mechanical and electrical switching performance.
- Decades of industry leading research and development focused on meeting the technician’s needs
- Robust design and high grade materials meet the stringent demands of today’s service professional
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
KAI – Exterior Door Handle (Part No.NI1521108)
from
$14.99
New Standard Replacement Passenger Side Rear Exterior Door Handle, Paint To Match
Product Features:
See More
Product Features:
- Paint To Match, Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Help – Exterior Door Handle Front Right Chrome (Part No.96632)
from
$221.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
- Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
- Excellent value – original equipment quality at a lower price
- Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
Dorman – Help – Exterior Door Handle Front Left (Part No.81529)
from
$45.49
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
- Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
- Excellent value – original equipment quality at a lower price
- Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
Dorman – Help – Exterior Door Handle Front Left Smooth Black (Part No.80807)
from
$35.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
- Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
- Excellent value – original equipment quality at a lower price
- Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
K-Source – Mirror Assembly: Driver Side, Manual Remote Adjustment, 1 Pk (Part No.68566N)
from
$92.99
Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.
Product Features:
See More
Product Features:
- Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
- Mirror glass has manual remote adjustment
- This Mirror does not fold
- Can be Paintable to match vehicle
- Superior material and manufacturing process ensures the highest quality possible
K-Source – Mirror Assembly: Driver Side, Power Adjustment, Foldable, 1 Pk (Part No.68620N)
from
$213.99
Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.
Product Features:
See More
Product Features:
- Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
- Mirror glass is power adjustable
- OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
- Manual folding for additional clearance
- Black with Paintable to match cover
Burco – Side View Replacement Mirror (Part No.3151)
from
$26.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
KAI – Mirror Assembly: Passenger Side, Power Adjustment, 1 Pk (Part No.NI1321110)
from
$39.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Passenger Side Power Door Mirror, Paint To Match. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.
Product Features:
See More
Product Features:
- Paint To Match, Convex Glass
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
StrongArm – Liftgate Lift Support: 24.95" Ext Length, 8.85" Travel, 63 Lbs of Force, 1 Pk (Part No.C4812)
from
$32.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
StrongArm – Trunk Lift Support: 9.43" Ext Length, 2.5" Travel, 108 Lbs of Force, 1 Pk (Part No.F6429)
from
$24.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
Atlas Lift – Lift Support (Part No.LS11159)
from
$37.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
Atlas Lift – Lift Support (Part No.LS10301)
from
$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
Burco – Side View Replacement Mirror (Part No.5247)
from
$29.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Side View Replacement Mirror (Part No.2559)
from
$39.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Side View Mirror Replacement with Backing Plate (Part No.5535RSG)
from
$84.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Side View Mirror Replacement with Backing Plate (Part No.4485RSG)
from
$79.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Le Bra – Front End Cover (Part No.55487-01)
from
$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Le Bra – Front End Cover (Part No.55152-01)
from
$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Covercraft – Custom Hood Protector (Part No.45643-01)
from
$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!
Product Features:
See More
Product Features:
- Protects vehicle’s hood from bugs or rock chips
- Low profile, aerodynamic design
- Installs in less than 5 minutes, no tools required
- Custom fit exactly to your vehicle
- Leather grain vinyl
Le Bra – Front End Cover (Part No.55801-01)
from
$157.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Carquest Premium – Door Lock Kit (Part No.DLC2292)
from
$58.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Door Lock Kit (Part No.DLA1145)
from
$10.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Popular 1983 Nissan Sentra Body Parts Categories
1983 Nissan Sentra Body Parts
You count on your 1983 Nissan Sentra to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Body Parts. With 12 Body Parts ranging in price from $5.99 to $159.99, you’re sure to find everything you need for your 1983 Nissan Sentra.
Brands matter. If you want to shop a specific Body Parts brand, we stock 8 different brands like Dorman, Carquest Premium, and Covercraft. 1983 Nissan Sentra Body Parts start as low as $5.99!
One of the best ways to find top quality OEM or aftermarket Body Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 9 extensive product reviews on 1983 Nissan Sentra Body Parts.
Did we mention you can order your Body Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Body Parts inventory for your 1983 Nissan Sentra below to get started!
Top-Rated Body Parts Brands For Your 1983 Nissan Sentra
Trusted Body Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1983 Nissan Sentra running right for years to come. In our inventory you’ll find brands like Dorman, Carquest Premium, Covercraft, and even more.
Popular Dorman – Help Body Parts
You’ll find popular Dorman – Help brand products across Vehicle Latches and Handles. All are waiting to get your 1983 Nissan Sentra back on the road. Some of the top-rated Dorman – Help products in these categories are:
Top-Rated Body Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Body Parts for your 1983 Nissan Sentra, and some of our most reviewed parts include:
from
$32.99
(2)
Liftgate Lift Support: 24.95" Ext Length, 8.85" Travel, 63 Lbs of Force, 1 Pk
Lift Supports
FAQs for 1983 Nissan Sentra Body Parts
What are the most purchased Body Parts for the 1983 Nissan Sentra?
Out of 12 Body Parts for the 1983 Nissan Sentra, the most popular in our inventory are:
