1983 Lincoln Town Car Fuel and Emissions Systems
More 1983 Lincoln Town Car Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1983 Lincoln Town Car, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1983 Lincoln Town Car Fuel and Emissions Systems
Bosch – Fuel Pressure Sensor (Part No.C3001212139BOS)
from
$76.53
All Bosch High Pressure Sensors provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended.
Product Features:
See More
Product Features:
- Built-in circuit protection to ensure your electronics and computer systems stay unharmed
- High reliability of pressure sensing proved in gasoline and diesel direct injection systems
- Sturdy design, vibration resistant and thermal stability
DENSO – Oxygen Sensor: 4 Wire, 18.11" Long, Heated, Exact Fit (Part No.234-4609)
from
$50.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1006)
from
$27.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Cardone – Smog Air Pump (Part No.32-291)
from
$331.99
CARDONE Remanufactured Smog Pumps are engineered for quick installation and no comebacks. These pumps come with all necessary components for easy installation, while other brands leave out integral components, such as inlets and outlets that commonly break during installation. CARDONE engineers pay special attention to proper vane size and shape on each application to maintain proper flow, while other brands consolidate vane sizes for their own convenience.
Product Features:
See More
Product Features:
- 100% testing of all units guarantees reliable performance every time
- High temperature grease extends bearing life, resulting in longer pump life
- New carbon shoes/vanes on every unit ensure accurate air output to meet today’s stringent emissions standards
- Guaranteed fit and function
- Meets or exceeds O.E.M performance
KAI – Fuel Tank Lock Ring (Part No.TNKLO03)
from
$19.99
New Standard Replacement Lock/O-Ring Set
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61063)
from
$14.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Victor Reinz – Fuel Injector O-Ring Kit (Part No.18-10027-01)
from
$8.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Delphi – Fuel Pump Strainer (Part No.FS0092)
from
$35.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Filtration performance and micron rating meet or exceed OE requirements
- OE replacement strainer designed for use with Delphi electric fuel pumps
- Replacing the strainer is always recommended when replacing a fuel pump
Dorman – 5/16 In. Fuel Line Retaining Clips (Part No.800-003)
from
$6.99
This fuel line clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this fuel line clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Spectra Premium – Fuel Tank Strap (Part No.ST14)
from
$37.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
- Direct fit ensures safe, secure fuel tank installation
- Product individually packaged and labeled to help reduce product damage prior to installation
- Industry leading coverage on straps for plastic tanks
Dorman – 5-Wire Ford Fuel Pump Relay (Part No.84701)
from
$13.99
This fuel pump harness connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this fuel pump harness connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Coolant Temperature Sensor with Thread Sealant (Part No.WTC1015)
from
$24.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1048)
from
$1.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Electronic Engine Control Test Plug Connector (Part No.PT763)
from
$30.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
- Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
- All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
- Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Fuel Tank Lock Ring (Part No.LO1582930)
from
$9.99
Carquest Premium fuel pump tank seals are built by Carter Fuel Systems and Agility Auto Parts, industry leaders in high-quality fuel system components. Carquest Premium offers a complete line of fuel pump tank seals covering a wide variety of North American vehicle applications. Carquest Premium fuel pump tank seals are engineered to meet or exceed all OEM specifications.
Product Features:
See More
Product Features:
- Engineered to meet or exceed all OEM specifications.
- Precision stamped and are treated with a rust proof finish to ensure durability and strength
Accel – Performance Fuel Injector, 23lb, 8-pack (Part No.150823)
from
$430.99
Excellent atomization of fuel. Improved fuel economy and throttle response. Help with problem carbon build up.
Product Features:
See More
Product Features:
- Provides Precise Control Of Fuel Delivery And Atomization
- Increases Power/Improves Throttle Response/Better Fuel Economy
- All New Units; Not Modified Or Remanufactured From Used Cores
- New Low-Mass Disc Design
- Accurate Metering Control Even At Ultra-Low And High Duty Cycles
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Dorman – Fuel Tank Vent Rollover Valve (Part No.911-060)
from
$27.99
This fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles
- Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dorman – Help – Carburetor Pre-Heater Hose – 2 In. X 18 In. – Aluminum (Part No.96024)
from
$5.99
This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles
- Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Locking Fuel Cap (Part No.10591)
from
$23.99
None
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Motorcraft – Air Charged Temperature Sensor (Part No.C6000408661MTR)
from
$56.59
Motorcraft Air Charged Temperature Sensors are designed and tested to meet OE specifications for durability and reliability under extreme conditions. These are manufactured using high standards which ensure long lasting durability. They have high resistance and offer superior service life.
Product Features:
See More
Product Features:
- Ensures long lasting durability
- Reliable under extreme conditions
- Made of high quality material
- Resists fatigue failure
- Offers superior service life
Spectra Premium – Hanger Assembly; Includes Pump, Sender, and Strainer (Part No.SP2113H)
from
$147.99
CARQUEST fuel pump sender assemblies feature exact fit, with design improvements, such as upgraded polymers, brushes, and commutators to ensure lasting durability in multiple fuel blends. Also features advanced rust-inhibiting finish for longer life.
Product Features:
See More
Product Features:
- Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
- Advanced rust-inhibiting finish for long-lasting durability
- High-performance pump section assembly provides superior performance
- Leading-edge inlet design to reduce friction and increase performance
- Gradient density strainer designed for better contamination resistance
Carquest Premium – Fuel Pump Hanger Assembly: Fuel Pump, Sending Unit and Strainer (Part No.HS219640)
from
$142.99
Carquest Premium fuel pump hanger assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump hanger assemblies are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump hanger assemblies are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
KAI – Fuel Tank (Part No.FTK010658)
from
$244.99
New Platinum Pro Fuel Tank 4.6Ltr V8, 19 Gallons, With Roll-Over Valve
Product Features:
See More
Product Features:
- 19 Gallons, With Roll-Over Valve
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Spectra Premium – Fuel Tank (Part No.F42B)
from
$278.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Lock ring included with each tank to reduce installation time and to ensure a complete repair
- Made with corrosion resistant, OE approved, Ni Terne steel for durability
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
Carquest – Multi Purpose Relay (Part No.83A1016)
from
$20.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- High-quality products that meet OE appearance and performance to
Popular 1983 Lincoln Town Car Fuel and Emissions Systems Categories
1983 Lincoln Town Car Fuel and Emissions Systems
You count on your 1983 Lincoln Town Car to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 48 Fuel and Emissions Systems ranging in price from $2.49 to $331.99, you’re sure to find everything you need for your 1983 Lincoln Town Car.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 11 different brands like Felpro, Dorman, and Carquest Premium. 1983 Lincoln Town Car Fuel and Emissions Systems start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 90 extensive product reviews on 1983 Lincoln Town Car Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are 5/16 In. Quick Connector, Straight w/ 18 In. of 3/8 In. Nylon Tube and a Union with 4.5 stars and Fuel Sending Unit Retainer Kit with 3.8 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1983 Lincoln Town Car below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1983 Lincoln Town Car
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1983 Lincoln Town Car running right for years to come. In our inventory you’ll find brands like Felpro, Dorman, Carquest Premium, and even more.
Popular Felpro Fuel and Emissions Systems
You’ll find popular Felpro brand products across Fuel Injectors and Fuel Pumps. All are waiting to get your 1983 Lincoln Town Car back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Bosch Fuel and Emissions Systems
If Bosch are what you’re looking for, our inventory holds plenty. We stock Bosch brand Fuel and Emissions Systems for your 1983 Lincoln Town Car, and some of our most reviewed Bosch parts include:
FAQs for 1983 Lincoln Town Car Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1983 Lincoln Town Car?
Out of 48 Fuel and Emissions Systems for the 1983 Lincoln Town Car, the most popular in our inventory are:
from
$24.99
This product is not rated
Coolant Temperature Sensor with Thread Sealant
Ambient Air Temperature Sensors
What are the top-rated 1983 Lincoln Town Car Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1983 Lincoln Town Car based on customer reviews/ratings are:
from
$26.49
(8)
5/16 In. Quick Connector, Straight w/ 18 In. of 3/8 In. Nylon Tube and a Union
“Fits my 1995 Ford F150 fuel line. The rubber washer inside the special connector for my fuel line seized onto the fuel filter. This resulted in me try”
from
$14.49
(4)
Fuel Sending Unit Retainer Kit
“Fit my 92 Ford F150 4X4 perfect.
Only thing I bought a rear tank today and it did not come with the O ring so I had to but this also.”
