1983 GMC S15 Drivetrains

Essential 1983 GMC S15 Drivetrains

Motive Gear – Axle Shaft (Part No.14035368)

Axle Shaft

from

$143.99
The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

Product Features:
  • AXLE SHAFT 83-89 “S” SERIES 26 SPL. 4 X 4, 29″
See More

National – Bearings (Part No.A-5)

Bearings

from

$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Oil Seal (Part No.S-7412S)

Oil Seal

from

$6.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – C/Clip For GM 7.5", 7.6" & 8" (Part No.33082)

C/Clip For GM 7.5", 7.6" & 8"

from

$14.99
Product Features:
  • c-clip for GM 7.5″, 7.625″ and 8.0″
See More

National – Bearings (Part No.M88047)

Bearings

from

$71.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Uni-Fit C.V. Joint Boot Kit Inner Greater Than 3.35 In. Diameter (Part No.614-004)

Uni-Fit C.V. Joint Boot Kit Inner Greater Than 3.35 In. Diameter

from

$29.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 55072)

DIFFERENTIAL GASKET

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Dura Grip Case, GM 7.5 & 7.625", 3.23 & Up (Part No.20106)

Dura Grip Case, GM 7.5 & 7.625", 3.23 & Up

from

$399.99
GM 7.5″ & 7.6″ DURA GRIP case, bare, 3.23 & up, 26spline & 28spline.

Product Features:
  • Dura Grip positraction carrier case
  • Does not include spider gears
  • Fits GM 7.5″ and 7.625″
  • 3.23 and up ratios only
See More

Yukon Gear – Pinion Nut (Part No.33152)

Pinion Nut

from

$9.99
Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
  • 7/8″ x 14 thread
  • 1 1/4″ socket
See More

Dorman – Spindle Nut M24-1.5 Hex Size 36mm (sold by each) (Part No.615-149)

Spindle Nut M24-1.5 Hex Size 36mm (sold by each)

from

$3.29
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Shaft Repair Sleeve (Part No.99125)

Shaft Repair Sleeve

from

$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Motive Gear – Differential Mini Spool (Part No.MS7.5-28)

Differential Mini Spool

from

$101.99


Product Features:
  • MINI SPOOL GM 7 1/2″ 28 SPLINE
See More

Richmond Gear – RngPnnInstlKt (Part No.83-1044-B)

RngPnnInstlKt

from

$43.99
RngPnnInstlKt

Yukon Gear – Adapter Sleeve Fro GM 7.2", 7.625" & 8.0" Yokes To Use Triple Lip Pinion Seal (Part No.41210)

Adapter Sleeve Fro GM 7.2", 7.625" & 8.0" Yokes To Use Triple Lip Pinion Seal

from

$25.99
Yukon 4340 Chrome-Moly replacement outer stub for D44 ’87-’94 Wrangler with a length of 8.31″ and 27 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:
  • 27 spline
  • 8.31″ long
  • Fits Dana Spicer 30 in 1987-1994 Wrangler
  • Outer stub
  • 5-760X U-joint size
  • 4340 Chromoly
  • For WARN hub conversion only
See More

Pro-King – Differential Cross Shaft (Part No.742G930)

Differential Cross Shaft

from

$2.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

National – Bearings (Part No.LM67048)

Bearings

from

$9.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Posi Spring Kit For GM 7.5", With Preload Plates (Part No.33206)

Posi Spring Kit For GM 7.5", With Preload Plates

from

$153.99
Product Features:
  • Positraction spring kit
  • Fits GM 7.5″ and 7.625″ Dura Grip
  • Includes preload plates
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2018
  • Weight approx: 3 Lbs
  • BEARING ID / BORE: 1.3780 INCH / 35 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • COMPLETE MOUNT
See More

Dorman – Help – Transfer Case Switch (Part No.49315)

Transfer Case Switch

from

$29.99
This transfer case switch directly replaces the original equipment switch on certain vehicle years, makes and models.

Product Features:
  • Direct replacement – this 4WD switch matches the fit and function of the original switch on specific vehicle applications
  • Effective fix – restores proper 4WD operation after original switch degrades and fails
  • Durable construction – built for reliable longevity, free of defects in materials and craftmanship
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Yukon Gear – Differential Cover B (Part No.33569)

Differential Cover B

from

$5.99
Differential Cover B

Yukon Gear – Posi Shim Kit For GM 7.5" & 7.625" Eaton Positraction (Part No.16047)

Posi Shim Kit For GM 7.5" & 7.625" Eaton Positraction

from

$42.99
Product Features:
  • Shim kit
  • Fits GM 7.5″ and 7.625″ with Eaton positraction
See More

Yukon Gear – Pinion Install Kit For GM 7.5" Differential (Part No.13064)

Pinion Install Kit For GM 7.5" Differential

from

$203.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1982-1999 GM 7.5″ and 7.625″
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

National – Bearings (Part No.B-2010)

Bearings

from

$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Yukon Gear – 8.5" & 8.2" GM Carrier Installation Kit (Part No.57008)

8.5" & 8.2" GM Carrier Installation Kit

from

$109.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.2″ & 8.5″ differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits GM 7.5″, 7.625″ 8.2″ and 8.5″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Richmond Gear – Differential Cross Shaft (Part No.80-0270-1)

Differential Cross Shaft

from

$64.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Popular 1983 GMC S15 Drivetrains Categories

1983 GMC S15 Drivetrains

You count on your 1983 GMC S15 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 273 Drivetrains ranging in price from $1.99 to $1,147.99, you’re sure to find everything you need for your 1983 GMC S15.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 18 different brands like Valvoline, Moog, and Driveworks. 1983 GMC S15 Drivetrains start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 6,530 extensive product reviews on 1983 GMC S15 Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.2 stars and Oil Seal with 4.8 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1983 GMC S15 below to get started!

Top-Rated Drivetrains Brands For Your 1983 GMC S15

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1983 GMC S15 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.

Popular Felpro Drivetrains

You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1983 GMC S15 back on the road. Some of the top-rated Felpro products in these categories are:
DIFFERENTIAL GASKET
from $7.99
(45)
DIFFERENTIAL GASKET
Rear Differential Cover Gaskets

FAQs for 1983 GMC S15 Drivetrains

What are the most purchased Drivetrains for the 1983 GMC S15?

Out of 273 Drivetrains for the 1983 GMC S15, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $26.99
(89)
Greaseable Premium Universal Joint
U-Joints
Taper Bearing Set
from $10.29
(38)
Taper Bearing Set
Differential Bearings
Universal Joint
from $15.99
(52)
Universal Joint
U-Joints

What are the top-rated 1983 GMC S15 Drivetrains?

Top-rated Drivetrains for your 1983 GMC S15 based on customer reviews/ratings are:
Greaseable Super Strength Universal Joint
from $34.99
(48)
Greaseable Super Strength Universal Joint
“Moog and advanced auto got me out of a bad situation with an amazing part ( u”
Oil Seal
from $5.49
(38)
Oil Seal
“Exact fit , price was good”
Rear Differential Cover
from $20.99
(38)
Rear Differential Cover
“Looks great, face lift for the rear differential. Old one was rusted & in bad shape. Just remember to get the correct size.”