1983 GMC Jimmy Bodies and Fender Parts
More 1983 GMC Jimmy Bodies and Fender Parts
Find your specific 1983 GMC Jimmy original or aftermarket Bodies and Fender Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1983 GMC Jimmy Bodies and Fender Parts
KAI – Quarter Panel (Part No.GMK4174610732R)
from
$119.99
New Goodmark Passenger Side Lower Front Quarter Panel Patch, 7 3/4 Inches Wide X 14 1/2 Inches High
Product Features:
See More
Product Features:
- 7 3/4 Inches Wide X 14 1/2 Inches High
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Energy Suspension – Body Cab Mount Set (Part No.3.4132R)
from
$225.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Assures Longer Lasting Cab to Bed Alignment
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
KAI – Fender Brace (Part No.GMK4143195671P)
from
$29.99
New Goodmark Front Lower Fender Brace Set, Reinforcement Set For Lower Mount Point
Product Features:
See More
Product Features:
- Reinforcement Set For Lower Mount Point
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Brace (Part No.GMK4144662731)
from
$21.99
New Goodmark Rear Fender Center Brace, For Stepside Models, 4 Required, Made Of Steel
Product Features:
See More
Product Features:
- For Stepside Models 4 Required Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Front Passenger Side Wheel Opening Molding, Made Of Steel (Part No.GM1291102)
from
$29.99
New Standard Replacement Front Passenger Side Wheel Opening Molding
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Wheel Arch Trim (Part No.GM1790102)
from
$24.99
New Standard Replacement Rear Driver Side Wheel Opening Molding
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Spare Tire Bracket (Part No.GMK4144967751)
from
$59.99
New Goodmark Spare Tire Support Hook, For Models With Glide-Out Spare Tire, Made Of Steel
Product Features:
See More
Product Features:
- For Models With Glide-Out Spare Tire Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dee Zee – With Step Pads, 3" Round Bent/ 32" L, Polished, Ss, With Welded End Caps (Part No.DZ3700303)
from
$661.99
A tubular side step for your vehicle. Dee Zee Universal Steps are available when a custom fit application is not available for your vehicle. Drilling is required into the vehicle frame for mounting. Sturdy hidden bracing and hardware is coated to help prevent rust and keep your tubes strong. Molded plastic step pads provide a non-skid stepping area. Universal Nerf Bars are available in 3 Inch Round or 4 Inch Oval designs. 3 Inch Round designs are available in UltraShine Aluminum, Black Aluminum, Polished Stainless Steel or Black Steel. 4 Inch Oval designs feature UltraShine Aluminum or Black Aluminum.
Product Features:
See More
Product Features:
- Mounting Kit Included
- Frame Body Mount Bolts
- Drilling Required
- 1 Pad On The Bar
- Frame Mounted For Maximum Strength
- Powder Coated Steel Braces Resist Rust
- Powder Coated Steel Braces Resist Rust
- Molded Plastic Step Pads For Secure Footing
- Fit Most Full And Mid Size Pickups
Dee Zee – With Step Pads, 3" Round Bent/ 32" L, Powder Coated, Black, Steel (Part No.DZ3700301)
from
$411.99
A tubular side step for your vehicle. Dee Zee Universal Steps are available when a custom fit application is not available for your vehicle. Drilling is required into the vehicle frame for mounting. Sturdy hidden bracing and hardware is coated to help prevent rust and keep your tubes strong. Molded plastic step pads provide a non-skid stepping area. Universal Nerf Bars are available in 3 Inch Round or 4 Inch Oval designs. 3 Inch Round designs are available in UltraShine Aluminum, Black Aluminum, Polished Stainless Steel or Black Steel. 4 Inch Oval designs feature UltraShine Aluminum or Black Aluminum.
Product Features:
See More
Product Features:
- Mounting Kit Included
- Frame Body Mount Bolts
- Drilling Required
- 1 Pad On The Bar
- Frame Mounted For Maximum Strength
- Powder Coated Steel Braces Resist Rust
- Powder Coated Steel Braces Resist Rust
- Molded Plastic Step Pads For Secure Footing
- Fit Most Full And Mid Size Pickups
KAI – Fender Extension Panel (Part No.RRP114)
from
$24.99
New Standard Replacement Driver Side Rear Slip-On Fender Section, 41 5/8 X 12
Product Features:
See More
Product Features:
- 41 5/8 X 12, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Rocker Panel (Part No.GMK4173460691L)
from
$364.99
New Goodmark Driver Side Rocker Box
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Rocker Panel (Part No.RRP101)
from
$26.99
New Standard Replacement Driver Side Rocker Panel, Slip-On Type, 42 1/2 X 5 1/2
Product Features:
See More
Product Features:
- Slip-On Type, 42 1/2 X 5 1/2, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – B-Pillar/Rocker Panel (Part No.RRP103)
from
$44.99
New Standard Replacement Driver Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4
Product Features:
See More
Product Features:
- 46 3/4 X 11 3/4, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – B-Pillar/Rocker Panel (Part No.RRP102)
from
$41.99
New Standard Replacement Passenger Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4
Product Features:
See More
Product Features:
- 46 3/4 X 11 3/4, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Le Bra – Front End Cover (Part No.55677-01)
from
$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Le Bra – Front End Cover (Part No.55736-01)
from
$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Dee Zee – 11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On (Part No.DZ1808)
from
$39.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.
Product Features:
See More
Product Features:
- Protect Your Vehicle And Trailer From Rocks And Messy Conditions
- Classic Diamond Style Design
- Protected By A BriteGard Powder Coat Finish
- Compliment Brite-Tread Running Boards
Dee Zee – Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material (Part No.DZ17939)
from
$28.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.
Product Features:
See More
Product Features:
- Protect Your Vehicle And Trailer From Rocks And Messy Conditions
- Universal Fitting
- Easy No Drill Installation
- Perfect Compliment Nerf Bars
KAI – Floor Pan (Part No.RRP083)
from
$98.99
New Standard Replacement Driver Side Extended Cab Floor, 24 X 33
Product Features:
See More
Product Features:
- 24 X 33, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.RRP082)
from
$101.99
New Standard Replacement Passenger Side Extended Cab Floor, 24 X 33
Product Features:
See More
Product Features:
- 24 X 33, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Wheel Arch Panel (Part No.RRP113)
from
$24.99
New Standard Replacement Passenger Side Slip-On Rear Fender Section, 41 5/8 X 12
Product Features:
See More
Product Features:
- 41 5/8 X 12, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Backing Plate (Part No.RRP104R)
from
$12.99
New Standard Replacement Passenger Side Rocker Panel Backing Plate, 33 1/2 X 6 1/2
Product Features:
See More
Product Features:
- 33 1/2 X 6 1/2, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Backing Plate (Part No.RRP104L)
from
$13.99
New Standard Replacement Driver Side Rocker Panel Backing Plate, 33 1/2 X 6 1/2
Product Features:
See More
Product Features:
- 33 1/2 X 6 1/2, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Backing Plate (Part No.RRP104)
from
$7.99
New Standard Replacement Universal Rocker Panel Backing Plate, 26 1/8 X 4 1/4
Product Features:
See More
Product Features:
- 26 1/8 X 4 1/4, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Needa Parts – Panel Trim Retainer – Interior – GM/Chrysler (Part No.45478)
from
$2.49
Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.
Product Features:
See More
Product Features:
- Needa Parts offers a complete assortment for all popular makes and models
- Vehicle make specific fastener kits are available
- All fasteners meet or exceed OEM standards
Popular 1983 GMC Jimmy Bodies and Fender Parts Categories
1983 GMC Jimmy Bodies and Fender Parts
Maybe you’re in the middle of a full rebuild of that 1983 GMC Jimmy. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 28 different Bodies and Fender Parts in our inventory ranging from $2.49 to $661.99. That means you can find the exact parts or products you need to keep that 1983 GMC Jimmy running smoothly.
Bodies and Fender Parts are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1983 GMC Jimmy. Dee Zee, KAI, and Energy Suspension are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Bodies and Fender Parts for your 1983 GMC Jimmy, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1983 GMC Jimmy rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Bodies and Fender Parts Brands To Make Your 1983 GMC Jimmy Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1983 GMC Jimmy demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Jimmy the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.
Popular KAI Bodies and Fender Parts
We carry KAI parts in our stock across Wheel Arch Trims categories, plus more. For a 1983 GMC Jimmy, our most popular KAI Bodies and Fender Parts include:
Top 1983 GMC Jimmy Bodies and Fender Parts from Dee Zee
Dee Zee products are another trusted brand when it comes to Bodies and Fender Parts for your 1983 GMC Jimmy. Popular Dee Zee parts include:
from
$28.49
(1)
Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material
Splash Guard (Mud Flap)
FAQs for 1983 GMC Jimmy Bodies and Fender Parts
What are the most purchased Bodies and Fender Parts for the 1983 GMC Jimmy?
Out of 28 Bodies and Fender Parts for the 1983 GMC Jimmy, the most popular in our inventory are:
from
$39.49
This product is not rated
11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On
Splash Guard (Mud Flap)
