1983 GMC G3500 Drivetrains
Find Your Specific 1983 GMC G3500 Drivetrains
Below you will find various in-demand GMC Drivetrains, components and accessories for your 1983 G3500. Advance Auto Parts has popular G3500 parts like Differentials, Spindles, Transfer Cases and more. You’ll also find aftermarket and OEM Drivetrains for other G3500 model years including
1988,
1989,
1990,
1991,
1992,
1993,
1994,
1995,
1996 and more. Select a category of 1983 GMC G3500 Drivetrains below and start saving instantly.
Popular 1983 GMC G3500 Drivetrains Categories
Essential Drivetrains for 1983 GMC G3500s
Yukon Gear – Pump Up Kit, Zip Locker (Part No.34031)
from
$174.99
Pump up kit, Zip Locker.
Product Features:
See More
Product Features:
- Tire pump up kit
- Includes hose, fittings, couplers and teflon tape
Driveworks – Manual Transmission Input Shaft Seal (Part No.S-481181-N)
FAG US – Shaft Seal (Part No.SS3147)
from
$32.49
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Yukon Gear – Pinion Nut (Part No.33152)
from
$9.99
Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.
Product Features:
See More
Product Features:
- Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
- 7/8″ x 14 thread
- 1 1/4″ socket
Yukon Gear – Chrome Replacement Cover For Dana 60 And 61 Standard Rotation (Part No.32005)
from
$89.99
Chrome replacement cover for Dana 60 and 61(not reverse rotation!).
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 60
- Chrome
FAG US – DTC Cental Bearing, Propshaft (Part No.CH0169)
from
$175.99
Schaeffler hanger bearings are engineered and built to provide precise driveshaft alignment, support shafts and axles with the least possible friction and wear under the harshest conditions. This vital component also increases driveline integrity by absorbing and isolating vibration to protect the driveline and provide a smooth, comfortable ride.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
National – Multi-Purpose Bearing (Part No.A-42)
from
$41.99
Product Features:
See More
- CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – DiffrlPinSupportBolt (Part No.33582)
from
$5.99
DiffrlPinSupportBolt
Yukon Gear – Replacement Inner Slinger For Dana 60 (Part No.33014)
Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)
from
$3.99
Product Features:
See More
- Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
Pro-King – Rear Axle Shaft Kit (Part No.AXK-184)
from
$247.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.
Product Features:
See More
Product Features:
- High strength steel
- Dual heat treating process
USA Standard Gear – Spartan Spring & Pin Kit, Fits Larger Designs (Part No.17010)
from
$26.99
Spartan spring & pin kit, fits larger designs.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60
- Replacement alignment pin and spring kit
Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)
Yukon Gear – Eaton Positraction Shim Kit For 9.5" GM (Part No.16059)
from
$47.99
Eaton positraction shim kit for 9.5″ GM.
Product Features:
See More
Product Features:
- Shim kit
- Fits GM 9.5″ Eaton positraction
National – Tapered Roller Bearing Cone (Part No.HM88649)
from
$19.79
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Replacement Standard Carrier Case For Dana Spicer 60, 4.10 And Down (Part No.20030)
from
$299.99
Product Features:
See More
- Fits Dana Spicer 60
- 4.10 ratio and down only
- Fits standard open differentials only
Yukon Gear – Bearing Race Driver (Part No.56018)
from
$215.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM903210 race
- All steel construction
National – Shaft Repair Sleeve (Part No.99187)
from
$36.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)
from
$34.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1310 u-joint size
- Includes two u-bolts and four nuts
National – Tapered Roller Bearing Cone (Part No.HM903249)
from
$40.99
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Driveworks – Oil Seal (Part No.S-9449)
from
$5.49
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)
from
$8.99
Product Features:
See More
- Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
- For Trac Loc positraction applications only
Yukon Gear – Locking Key / Wedge For Dana 60 & 70 Spindle Nut (Part No.33512)
Felpro – Axle Housing Cover Gasket: Irregular Shaped 14 Bolt Hole Gasket (Part No.RDS 55387)
from
$8.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Yukon Gear – 9.5" GM C/Clip (Part No.33081)
Yukon Gear – 14T Side Gear Thrust Washer (Part No.33383)
from
$7.99
14T side gear Thrust washer.
Product Features:
See More
Product Features:
- Side gear thrust washer
- Fits GM 10.5″ 14 bolt truck
Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1410 U/Joint Size (Part No.41030)
from
$278.99
Yukon replacement yoke for Dana 60 and 70 with a 1410 U/joint size. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1410 u-joint size
- 4.188″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- Strap style
Motive Gear – Differential Ring and Pinion (Part No.D70-586)
Upgrade your 1983 GMC G3500 with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 1983 GMC G3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Drivetrains are key to keeping your G3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 376 Drivetrains for the 1983 GMC G3500, designed to meet your needs without breaking the bank.
From
Differential
replacements to
Spindles
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1983 GMC G3500 at great prices.
Our Drivetrains inventory for this model
ranges from just $1.89 to $1,487.99, with
an average price of $221.78.
Our 376 Drivetrains in stock come from 19 trusted brands, so you’re sure to find the right part for your 1983 GMC G3500 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1983 GMC G3500, we stock popular OEM and aftermarket Drivetrains from top names
like FELPRO, Moog, National, and more.
FELPRO Drivetrains
start at just $5.79 and boast an impressive 4.6 stars average rating from customers.
Moog and National also bring quality to the table, with Drivetrains available starting at $10.99, and at an average 4.5 stars rating.
With 4,200 customer reviews and counting, our 1983 GMC G3500 Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1983 GMC G3500 is always ready to roll. We’re committed to providing you with everything you need to keep your G3500 in top shape, all in one place.
Start shopping confidently below for your 1983 GMC G3500!
Best-Selling Differentials for 1983 GMC G3500s
Enhance the driving experience in your GMC with 295 quality Differential components, starting at $1.89.
Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)
from
$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
National – Bearing Race (Part No.382A)
from
$10.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Felpro – Axle Housing Cover Gasket Irregular Shaped 10 Bolt Hole Gasket (Part No.RDS 6014)
from
$17.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Richmond Gear – Differential Ring And Pinion (Part No.69-0054-1)
from
$369.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Felpro – Axle Housing Cover Gasket: Irregular Shaped 14 Bolt Hole Gasket (Part No.RDS 55387)
from
$8.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
National – Wheel Bearing: Direct Fit, 1 Piece (Part No.R-1561-TV)
from
$53.99
Product Features:
See More
- STRONG AND DURABLE – Controlled heat treatment process for strength and durability
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for durability and performance
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- Professional technicians know they can depend on National
Motive Gear – Differential Ring and Pinion (Part No.D70-410)
Motive Gear – Differential Carrier Gear Kit (Part No.GM9.5BI)
National – Tapered Roller Bearing Cone (Part No.LM501349)
from
$19.99
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Felpro – Axle Housing Cover Gasket Irregular Shaped 10 Bolt Hole Gasket (Part No.RDS 6095-1)
from
$9.49
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)
from
$11.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands of many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON*, DEXRON*-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)
from
$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 60, 70 and 80
- 3/8″
National – Bearing Race (Part No.HM88610)
from
$15.49
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18 (Part No.33037)
from
$4.99
Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2″ x 18.
Product Features:
See More
Product Features:
- Ring gear bolt for Dana Spicer 60, 70, 70U and 70HD
- 1/2″ x 18 thread
Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)
from
$8.99
Product Features:
See More
- Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
- For Trac Loc positraction applications only
National – Multi-Purpose Seal (Part No.9316)
from
$17.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Adapter Sleeve Fro GM 11.5" & 10.5" 14 Bolt Truck Yokes To Use Triple Lip Pinion Seal (Part No.41209)
from
$29.99
Product Features:
See More
- Adapter sleeve
- Fits GM 10.5″ 14 bolt truck and GM 11.5″
- Converts to triple lip seal
National – Multi-Purpose Bearing (Part No.A-42)
from
$41.99
Product Features:
See More
- CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)
from
$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Redi-Sleeve yoke saver
- Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
National – Tapered Roller Bearing Cone (Part No.HM88542)
from
$23.49
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Tapered Roller Bearing Cone (Part No.HM803146)
from
$38.49
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Bearing Race (Part No.HM88510)
from
$11.79
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)
Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)
from
$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
Most Popular 1983 GMC G3500 Spindles
Customize your GMC with 7 Spindles products
like Spindle Lock Nuts,
Spindle Retainers, and
Spindle Lock Nut Thrust Washers, all
priced under $76.99.
Yukon Gear – Spindle Nut Retainer, 2.030" I.D., 8 Bent Over TABS (Part No.33480)
from
$8.99
Spindle nut retainer, 2.030″ I.D., 8 bent over tabs. This replaces Spicer part number 33733.
Product Features:
See More
Product Features:
- Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
- 2.030″ I.D.
- 8 bent over tabs
Yukon Gear – Locking Key / Wedge For Dana 60 & 70 Spindle Nut (Part No.33512)
Dorman – Spindle Washer – I.D. 27/32 In. O.D. 2-1/16 In. Thickness 11/64 In. (Part No.618-007.1)
from
$4.29
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Spindle Nut Retainer For Dana 60 & 70, 1.830" I.D., 10 Outer TABS (Part No.33477)
from
$10.99
Spindle nut retainer for Dana 60 & 70, 1.830″ I.D., 10 outer tabs. This replaces Spicer part number 30637.
Product Features:
See More
Product Features:
- Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
- 1.830″ I.D.
- 10 outer tabs
Yukon Gear – Spindle Nut For GM 10.5" 14 Bolt Truck, 1.935" I.D., 6 Holes (Part No.33510)
Yukon Gear – Spindle Nut, 2.065" I.D., Six Slots (Part No.33484)
from
$27.99
Spindle nut, 2.065″ I.D., six slots. This replaces Spicer part number 36635.
Product Features:
See More
Product Features:
- Spindle nut
- 6 slots
- 2.065″ I.D.
Dorman – Spindle Washer – I.D. 27/32 In. O.D. 2-1/16 In. Thickness 11/64 In. (Sold by each) (Part No.618-007)
from
$4.99
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Top Picks for 1983 GMC G3500 Transfer Cases
Upgrade GMC G3500s with top-quality Transfer Cases parts, including 7 OEM and aftermarket selections for your 1983 model.
National – Shaft Repair Sleeve (Part No.99187)
from
$36.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Driveworks – Oil Seal (Part No.S-9449)
from
$5.49
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Taper Bearing Cone (Part No.S-HM-88649)
from
$19.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.N-1211-L)
from
$94.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Shaft Repair Sleeve (Part No.99176)
from
$46.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
FAG US – Cup (Part No.LM104911)
from
$16.99
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Driveworks – Manual Transmission Input Shaft Seal (Part No.S-481181-N)
In-Demand Drive Shafts and Axles for 1983 GMC G3500s
Select from 25 premium Drive Shafts and Axles parts for your 1983 GMC G3500, with prices ranging from $5.29 to $689.99.
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)
from
$40.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.48 INCH / 63 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- NOT PICTURED: TWO DUST SHIELDS
Driveworks – Universal Joint (Part No.DW-331BL)
from
$15.99
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Felpro – Drive Axle Shaft Flange Gasket 8 Bolt Hole Gasket, 2.719 Inch Inside Diameter, 4.438 Inch Outside Diameter (Part No.55350)
from
$5.79
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
National – Wheel Bearing (Part No.5707)
from
$22.99
Manufactured with premium-grade steel, National® cylindrical bearings are designed and engineered to meet OE specifications.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)
from
$6.99
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Spicer – Universal Joint, Greaseable 1350 Series (Part No.5-178X)
from
$44.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
Product Features:
See More
Product Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
Spicer – Universal Joint (Part No.5-1350X)
from
$45.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
National – Drive Shaft Center Support Bearing (Part No.HB-88107-A)
from
$44.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Product Features:
See More
Product Features:
- BUILT TO LAST – Advanced heat treatment process for strength
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)
from
$21.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.3780 INCH / 35 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- COMPLETE MOUNT
National – Multi Purpose Seal (Part No.7412S)
from
$8.49
Product Features:
See More
- Design type: spring loaded; single-lip
- Temperature range: -40 deg. F to 225 deg. F / -40 deg. C to 107 deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Tapered Roller Bearing Cone (Part No.HM88649)
from
$19.79
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Full-Floating Axle Seal For GM 14T (Part No.30018)
from
$13.99
Full-floating axle seal for GM 14T.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- Fits GM 10.5″ 14 bolt truck
Yukon Gear – Yoke For GM 10.5" 14 Bolt Truck, 1350, Strap Style (Part No.41179)
from
$249.99
Yukon yoke for GM 10.5″ 14 bolt truck, 1350, strap style. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 10.5″ 14 bolt truck
- 30 spline
- 1350 u-joint size
- 3.625″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- Strap style
Driveworks – Drive Shaft Center Support (Part No.S-HB-88107-E)
National – Shaft Repair Sleeve (Part No.99125)
from
$30.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6027)
from
$5.29
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 87-97; GMC 67-05; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2012
- Weight approx: 1 Lbs
- CUSHION INSERT ONLY
- FOR COMPLETE MOUNT SEE PART 6056
Yukon Gear – Pinion Yoke Dust Shield For Dana 60 & 70 (Part No.33441)
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Yukon Gear – Billet Replacement Yoke For Dana 60 And 70 With 29 Spline Pinion And A 1350 U/Joint Size (Part No.41138)
from
$414.99
Yukon billet replacement yoke for Dana 60 and 70 with 29 spline pinion and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 and 70
- 29 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- U-bolt style
Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1410 U/Joint Size (Part No.41030)
from
$278.99
Yukon replacement yoke for Dana 60 and 70 with a 1410 U/joint size. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1410 u-joint size
- 4.188″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- Strap style
Dorman – U-Bolt Repair Kit – Reliable hardware (Part No.929-733)
from
$57.99
The components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of an axle of a vehicle or trailer. Check the leaf spring dimensions and other relevant application details to select the right type and size U-bolt kit for your needs.
Product Features:
See More
Product Features:
- Reliable hardware – the components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of a vehicle or trailer axle
- Check fit – carefully review the dimensions of the leaf springs that will be used and other relevant application details to select the right type and size U-bolt kit for your needs
- Durable construction – the components in this kit are engineered from quality materials for reliable performance and long service life
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Spicer – Universal Joint (Part No.5-1350-1X)
from
$49.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
See More
Yukon Gear – Dana 60 Semi-Float C-Clip (Part No.33247)
National – Multi-Purpose Seal (Part No.481181N)
from
$14.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Most Sold 1983 GMC G3500 Universal Joints
Explore our best-selling GMC parts for the 1983 G3500 among 42 OEM and aftermarket options starting from $4.59.
MOOG Driveline Products – Universal Joint Strap Kit (Part No.492-10)
from
$15.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 330, 330A, 331 & 331A
- Contains two 1.66″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.534G)
from
$42.99
Product Features:
See More
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- GREASABLE DESIGN – Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
Driveworks – Universal Joint (Part No.DW-534G)
from
$15.99
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging to provide higher strength and better rigidity
- Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting allows for easy maintenance and the flexible use of the entire assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals are applied to optimize grease retention and reduce contamination
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.234)
from
$29.49
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Spicer – Universal Joint (Part No.5-795X)
from
$45.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Neapco – Universal Joint (Part No.2-3010)
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.232)
from
$37.99
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.235)
from
$19.99
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Driveworks – Universal Joint (Part No.DW-331)
from
$15.99
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.231)
from
$37.99
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.331)
from
$41.99
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE – Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN – Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR – Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE – Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Spicer – Universal Joint, Greaseable S44/3R Series (Part No.5-3147X)
from
$36.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
Product Features:
See More
Product Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
Brute Force – Universal Joint (Part No.2-0053BF)
Driveworks – Universal Joint (Part No.DW-235)
from
$15.99
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Dorman – Help – U-Joint Repair Assortment 2 Pc (Part No.81020)
from
$16.99
This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Neapco – Universal Joint (Part No.2-3011)
Neapco – Universal Joint (Part No.2-0053)
Dorman – Help – U-Joint Repair Kit (Part No.81000)
from
$7.49
This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)
from
$59.99
Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.
See More
Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)
from
$34.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1310 u-joint size
- Includes two u-bolts and four nuts
Yukon Gear – 1350 & 1410 U/Joint U-Bolts, 3/8" X 1-11/16", Kit (Part No.41190)
from
$16.99
1350 & 1410 U/joint U-bolts, 3/8″ X 1-11/16″, kit.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits 1350 and 1410 u-joint size
- Includes two u-bolts and four nuts
Yukon Gear – U/Joint Strap For GM 14T (Part No.41200)
from
$9.99
Product Features:
See More
- U-joint strap
- Fits GM 10.5″ 14 bolt truck
- 1350 and 1410 u-joint size
- One single strap
Yukon Gear – Yoke For GM 10.5" 14 Bolt Truck, 1410, Strap Style (Part No.41180)
from
$299.99
Yukon yoke for GM 10.5″ 14 bolt truck, 1410, strap style. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 10.5″ 14 bolt truck
- 30 spline
- 1410 u-joint size
- 4.188″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- Strap style
Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)
Top-Rated Drivetrains Brands For Your 1983 GMC G3500
Shop for the best-rated brands offering Drivetrains and other products for your 1983 GMC G3500s. Below you’ll find some of our best rated Drivetrains from FELPRO, Moog, and National, and more. Drivetrains from these brands that fit a 1983 G3500 start at just $5.79 and are rated as high as 4.6 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 1983 GMC G3500 Drivetrains
When it comes to maintaining or upgrading your 1983 GMC G3500, using quality Drivetrains is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Drivetrains, specifically designed for the 1983 GMC G3500. With over 3 FELPRO brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.79, with an average price of just $10.92. Plus, with over 32 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$5.79
(11)
Drive Axle Shaft Flange Gasket 8 Bolt Hole Gasket, 2.719 Inch Inside Diameter, 4.438 Inch Outside Diameter
“The product was exact fit to the original and was great priced as well.”
from
$17.99
(1)
Axle Housing Cover Gasket Irregular Shaped 10 Bolt Hole Gasket
“OEM only uses silicone , the gasket set with a thin layer of silicone is a much better sealant method”
Popular Moog 1983 GMC G3500 Drivetrains
Moog auto parts is one of the highest quality Drivetrain brands in the market. Any 1983 GMC G3500 owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 1983 G3500, Advance Auto Parts carries a full inventory of 3 Moog Drivetrains. Plus you will be keeping your GMC in peak condition while saving money because prices on these Moog Drivetrains range from $15.99 to $42.99, plus, with more than 113 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.
from
$15.99
(2)
Universal Joint Strap Kit
“Fit just like new. One difference I noticed was that the thread ran up the bolt farther but I doubt that will effect performance.”
FAQs for 1983 GMC G3500 Drivetrains
Which Drivetrains are best-sellers for 1983 GMC G3500s?
Out of 376 Drivetrains that fit 1983 GMC G3500s, the following parts are the top sellers:
- DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (12079139) – $11.99
- Universal Joint (10265505) – $15.99
- Universal Joint (10265721) – $15.99
What’s the price range for 1983 GMC G3500 Drivetrains?
Drivetrain prices for the 1983 GMC G3500 start at $1.89 and go up to $1,487.99 for the most premium parts.
What’s the average price of a Drivetrain for a 1983 GMC G3500?
The average price for Drivetrains for the 1983 GMC G3500 is $221.78. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Drivetrains for other GMC G3500 model years?
What are the cheapest Drivetrains for my 1983 GMC G3500?
The cheapest 1983 GMC G3500 Drivetrains we carry in stock are:
- Differential Ring Gear Bolt (10282457) – $1.89
- Differential Crush Sleeve (20520169) – $2.99
- Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (11643194) – $3.99
- Spindle Washer – I.D. 27/32 In. O.D. 2-1/16 In. Thickness 11/64 In. (11236158) – $4.29
- Universal Joint (5270111) – $4.59
What are the top-rated Drivetrains that fit the 1983 GMC G3500?
Out of 4,200 reviews by customers, our 1983 GMC G3500 Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1983 GMC G3500 and their top-rated products:
- Differentials
- DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
- Axle Housing Cover Gasket Irregular Shaped 10 Bolt Hole Gasket (19780723) – $17.99
- Differential Ring And Pinion (10584212) – $369.99
- Universal Joints
- DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
- Axle Housing Cover Gasket Irregular Shaped 10 Bolt Hole Gasket (19780723) – $17.99
- Differential Ring And Pinion (10584212) – $369.99
What types of Drivetrains do you sell for my 1983 GMC G3500?
As of 11/2/25, these are some of the most in-demand types of Drivetrains for a 1983 GMC G3500:
Can I get help with 1983 GMC G3500 Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Drivetrains and more.
What is your return policy for GMC G3500 Drivetrains?
Advance Auto Parts keeps returns simple. For new GMC G3500 Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
