1983 Ford Ranger Differentials

Name: Drive Axle Assembly; Ford Ranger 99-09 Lockup Axle
Brand: Spartan
SKU: RAXP1931K
Price: 1898.99 USD

Find your specific 1983 Ford Ranger original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1983 Ford Ranger Differentials

from

$1898.99

Remanufactured Rear Axle assemblies are completely disassembled and thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed and include backing plates, axle shafts and fluid.

Product Features:

Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio

from

$10.49

Product Features:

SOLID SPACER FORD 8.8″ & 9″

from

$5.99

Product Features:

Outer oil slinger for Dana Spicer 25, 27, 30, 44 and 50

from

$6.29

Product Features:

Brand may vary by location

from

$2.49

Product Features:

CRUSH SLEEVE 7.25 & 8.25 MIN ORDER 5000

from

$167.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits 2009 and down Ford 8.8″
Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.

from

$214.99

Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:

Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

from

$19.99

Standard Open side gear thrust washer for 7.5″ Ford.

Product Features:

Side gear thrust washer
Fits Ford 7.5″

from

$207.99

8.8″ Ford TracLoc (with long ears–for early models only) clutch set, both sides.

Product Features:

Clutch kit
Fit Ford 8.8″ Trac Loc positraction

from

$9.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$15.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$37.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$84.99

7.5″ Ford notched cross pin shaft. Not Auburn gear. This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.

Product Features:

Notched cross pin shaft for Ford 7.5″
3.73 and up ratios
Not compatible with Spartan Locker or Powertrax Lock Right

from

$52.99

This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

Product Features:

Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$176.99

Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:

Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
Validated fit – this differential end yoke has been tested to confirm accurate fit

from

$9.99

5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:

Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
1/2″ head

from

$44.99

Product Features:

Spring kit for Dana Spicer 28, AMC Model 35 IFS, Dana Spicer 44 IFS and Dana Spicer 50 IFS
Allows for installation of positraction or locker

from

$5.99

This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$217.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits 2009 and down Ford 8.8″
Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.

from

$5.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$239.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$10.99

Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25″, 10.5″ & some 9.75″. 7/8-20 thread, 1 1/8 socket.

Product Features:

Pinion nut for Jeep JK front, Jeep Liberty front, Ford 9.75″, 10.25″, 10.5″ and AMC Model 20 and Model 35
7/8″ x 20 thread
1 1/8″ socket

from

$12.99

Product Features:

Cover gasket
Fits Dana Spicer 30

from

$0.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$22.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$404.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits standard rotation Ford 8.8″
8.80″ ring gear diameter
30 spline pinion
10 ring gear bolts
3.08 ratio

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$59.99

Product Features:

Super carrier shim kit for Ford 7.5″, GM 7.5″, 7.625″, 7.6″ IFS, 7.6″ IRS, 7.75″, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and GM 8.5″ front and rear
Interlocking design makes installation much easier

Popular 1983 Ford Ranger Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Rear Differential Pinion Bearings

Differential Carrier Bearings

Differential Lock Springs

Differential Pinion Bearing Kits

Differential Seals

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Oil Deflectors

Auxiliary Shaft Bearings

Differential Spider and Pinion Gear Kits

Differential Pinion Bearing Spacers

Maybe you’re in the middle of a full rebuild of that 1983 Ford Ranger. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 126 different Differentials in our inventory ranging from $0.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1983 Ford Ranger running smoothly.

Differentials are only as good as their brand. We stock 17 different brands to make sure you have plenty of trusted parts to choose from for your 1983 Ford Ranger. Dorman, Driveworks, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1983 Ford Ranger, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 356 reviews in this category, some of the top rated parts include Differential Cover Gasket with 3.8 stars and Differential Master Bearing Kit – Koyo with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1983 Ford Ranger rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1983 Ford Ranger Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1983 Ford Ranger demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Ranger the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Powertrax Differentials

We carry Powertrax parts in our stock across Complete Differentials categories, plus more. For a 1983 Ford Ranger, our most popular Powertrax Differentials include:

from $444.99

(1)

Lock Right Locker

Complete Differentials

Top 1983 Ford Ranger Differentials from Dorman

Dorman products are another trusted brand when it comes to Differentials for your 1983 Ford Ranger. Popular Dorman parts include:

from $34.99

(34)

Rear Differential Cover

Differential Covers

from $5.99

(11)

Differential Shaft Lock Bolt

Differential Pinion Shaft Lock Bolts

from $52.99

(2)

Differential Cover

Differential Covers

FAQs for 1983 Ford Ranger Differentials

What are the most purchased Differentials for the 1983 Ford Ranger?

Out of 126 Differentials for the 1983 Ford Ranger, the most popular in our inventory are:

from $13.99

(14)

Tapered Cone/Cup Wheel Bearing Set

Front Differential Pinion Bearings

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $23.99

(7)

Bearings

Front Differential Pinion Bearings

What are the top-rated 1983 Ford Ranger Differentials?

Top-rated Differentials for your 1983 Ford Ranger based on customer reviews/ratings are:

from $6.49

(13)

Differential Cover Gasket

“It’s a gasket. It fits and it doesn’t leak. That’s what they are supposed to do.”

from $112.99

(1)

Differential Master Bearing Kit – Koyo

“perfect product”

from $7.49

(1)

Differential Pinion Shim Kit

“good product”

1983 Ford Ranger Differentials

More 1983 Ford Ranger Differentials

Essential 1983 Ford Ranger Differentials

Spartan – Drive Axle Assembly; Ford Ranger 99-09 Lockup Axle (Part No.RAXP1931K)

Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4104)

Yukon Gear – Replacement Outer Oil Slinger For Dana 25, 27, 30, 44 & 50 (Part No.33011)

Driveworks – Tapered Roller Bearing (Part No.S-LM-603011)

Motive Gear – Differential Crush Sleeve (Part No.3507575)

Yukon Gear – Pinion Install Kit For Ford 8.8" Differential (Part No.13041)

Dorman – Rear Axle Shaft, Left (Part No.630-225)

Yukon Gear – Standard Open Side Gear And Thrust Washer For 7.5" Ford (Part No.33295)

Yukon Gear – 8.8" Ford Tracloc Clutch Set, Both Sides (Part No.16017)

National – Bearings (Part No.M86610)

National – Bearings (Part No.HM88610)

National – Shaft Repair Sleeve (Part No.99157)

Yukon Gear – 7.5" Ford Notched Cross Pin Shaft (Part No.33430)

Dorman – Differential Cover (Part No.697-710)

Dorman – Differential Pinion Yoke Assembly (Part No.697-532)

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Yukon Gear – Spring Kit For Dana 28, Model 35IFS, Dana 44IFS & Dana 50IFS With Grizzly, Detroit, Tt Or Pl (Part No.33263)

Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)

Yukon Gear – Bearing Install Kit For Ford 8.8" Differential (Part No.11042)

Pro-King – Differential Pinion Shim Kit (Part No.742G202)

Pro-King – Differential Internal Nest Kit (Part No.762B717)

Yukon Gear – Ppinion Nut 7/8-20 Thread, 1 1/8 Socket (Part No.33146)

Yukon Gear – Replacement Cover Gasket For Dana 30 (Part No.23003)

Pro-King – Differential Ring Gear Bolt (Part No.761A935)

Sealed Power – Engine Auxiliary Shaft Bearing Set (Part No.1460M)

Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 8.8" In A 3.08 Ratio (Part No.24349)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5" (Part No.55001)

Popular 1983 Ford Ranger Differentials Categories