1983 Dodge Omni Steering and Chassis Parts

Essential 1983 Dodge Omni Steering and Chassis Parts

Powercraft – Pump Seal Kit (Part No.7918)

Pump Seal Kit

from

$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.36197)

Bulk - 3/8" I.D. Return Hose J189

from

$52.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Rare Parts – Rack & Pinion Bellows (Part No.RP26550)

Rack & Pinion Bellows

from

$41.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.36196)

Bulk - 3/8" I.D. Return Hose J189

from

$39.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Driveworks – TIE ROD END 1 EA DRIVE (Part No.DW-EV128)

TIE ROD END 1 EA DRIVE

from

$22.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Forged housing from specific materials provides strength and durability to prevent breakage
  • Coated technology provides a smooth and durable surface to prevent corrosion and rust
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
  • A slotted nut and cotter pin for a more secure installation
See More

Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)

Pump Drive Shaft Seal Kit

from

$13.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

Tie Rod Dust Boot

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Powercraft – Lower Pinion Bearing Kit (Part No.8579)

Lower Pinion Bearing Kit

from

$43.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

MOOG – Alignment Shim (Part No.K993-1)

Alignment Shim

from

$7.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

MOOG – Rack and Pinion Mount Bushing (Part No.K7113)

Rack and Pinion Mount Bushing

from

$13.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Manufactured using premium materials
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Driveworks – Taper Bearing Set (Part No.S-A-5)

Taper Bearing Set

from

$10.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Rare Parts – Sway Bar Bushing (Part No.RP16287)

Sway Bar Bushing

from

$36.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Rare Parts – Sway Bar Bushing (Part No.RP15924)

Sway Bar Bushing

from

$33.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Cardone – Power Steering Pump (Part No.20-7903)

Power Steering Pump

from

$81.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Lares – Remanufactured Power Steering Pump (Part No.2237)

Remanufactured Power Steering Pump

from

$111.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Rare Parts – Tie Rod End (Part No.RP26765)

Tie Rod End

from

$36.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

MOOG – Tie Rod End (Part No.EV128)

Tie Rod End

from

$50.99
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.

Product Features:
  • Loose or worn chassis parts can lead to premature tire wear
  • Engineered to meet or exceed OE part performance
  • Stud design is optimized to provide ideal stud swing and strength for each application.
  • Wrench flats on housing and stud provide easy installation and alignment adjustment.
  • Assembled in the USA
See More

Powercraft – Rack Pinion Seal Kit (Part No.8576)

Rack Pinion Seal Kit

from

$69.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Rack Pinion Seal Kit (Part No.8610)

Rack Pinion Seal Kit

from

$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Rare Parts – R & P Mounting Bushing (Part No.RP15936)

R & P Mounting Bushing

from

$18.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Insulates Rack & Pinion from Frame.
  • Stabilizes Rack & Pinion
See More

National – Multi Purpose Seal (Part No.7013S)

Multi Purpose Seal

from

$20.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Rare Parts – Strut Rod Bushing (Part No.RP15926)

Strut Rod Bushing

from

$32.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Reduces tire wear
  • Improves handling while breaking
  • Aids in alignment of vehicle
See More

Rare Parts – Strut Rod Bushing (Part No.RP16267)

Strut Rod Bushing

from

$51.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Reduces tire wear
  • Improves handling while breaking
  • Aids in alignment of vehicle
See More

1983 Dodge Omni Steering and Chassis Parts

You count on your 1983 Dodge Omni to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 51 Steering and Chassis Parts ranging in price from $2.99 to $129.99, you’re sure to find everything you need for your 1983 Dodge Omni.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 12 different brands like Imperial, Driveworks, and Carquest Premium. 1983 Dodge Omni Steering and Chassis Parts start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 2,496 extensive product reviews on 1983 Dodge Omni Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Bellow Kits with 4.1 stars and Bulk – 3/8" I.D. Return Hose J189 with 4.6 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1983 Dodge Omni below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 1983 Dodge Omni

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1983 Dodge Omni running right for years to come. In our inventory you’ll find brands like Imperial, Driveworks, Carquest Premium, and even more.

Popular MOOG Steering and Chassis Parts

You’ll find popular MOOG brand products across Tie Rods. All are waiting to get your 1983 Dodge Omni back on the road. Some of the top-rated MOOG products in these categories are:
Steering Tie Rod End
from $48.49
(1)
Steering Tie Rod End
Tie Rod Ends

Top-Rated Imperial Steering and Chassis Parts


If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1983 Dodge Omni, and some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for 1983 Dodge Omni Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 1983 Dodge Omni?

Out of 51 Steering and Chassis Parts for the 1983 Dodge Omni, the most popular in our inventory are:
Taper Bearing Set
from $10.29
(70)
Taper Bearing Set
Pinion Bearings
Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)
from $7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters

What are the top-rated 1983 Dodge Omni Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 1983 Dodge Omni based on customer reviews/ratings are:
Bellow Kits
from $12.49
(18)
Bellow Kits
“Perfect”
Bulk - 3/8" I.D. Return Hose J189
from $46.49
(17)
Bulk – 3/8" I.D. Return Hose J189
“There is plenty of hose to get the job done”
Pump Complete Rebuild Kit
from $62.99
(14)
Pump Complete Rebuild Kit
“No complaints had all seals and o rings needed for the rebuild”