1983 Dodge B150 Fuel and Emissions Systems
More 1983 Dodge B150 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1983 Dodge B150, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1983 Dodge B150 Fuel and Emissions Systems
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1699)
from
$41.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)
from
$14.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Mr. Gasket – Electric Fuel Pump (Part No.12S)
from
$64.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer or Booster Pump
- Not designed for use on aircraft of any type.
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
Carquest Premium – Fuel Tank Selector Valve Connector (Part No.FSA1013)
from
$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Spectra Premium – Fuel Tank Lock Ring (Part No.LO06)
from
$5.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium lock rings meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Lock ring should be replaced when changing the fuel tank or fuel module
- Application specific design ensure a perfect fit guarantee
- OEM fit, form and function
- OEM design ensures corrosion resistance and prevents leakage from the fuel tank
- Manufactured with high quality material, ensuring the durability of this part to prevent costly leaks
Carquest – Fuel Tank Selector Valve (Part No.FSV3)
from
$84.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Robust designs backed by focused research meet today’s technical needs
- Decades of industry leading research and development focused on meeting the technician’s needs
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1188)
from
$18.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.70557)
from
$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Dorman – Fuel Tank Strap Coated for rust prevention (Part No.578-216)
from
$55.99
Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank strap matches the fit, function and performance of the original part
- Ideal solution – recommended for replacement when the fuel tank is serviced or replaced
- Durable construction – manufactured from quality materials for superior service and reliability
- Trustworthy design – backed by 100 years of automotive aftermarket experience
Spectra Premium – Fuel Tank Strap (Part No.ST25)
from
$29.49
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
- Direct fit ensures safe, secure fuel tank installation
- Product individually packaged and labeled to help reduce product damage prior to installation
- Industry leading coverage on straps for plastic tanks
Cardone – Smog Air Pump (Part No.32-212)
from
$159.99
CARDONE Remanufactured Smog Pumps are engineered for quick installation and no comebacks. These pumps come with all necessary components for easy installation, while other brands leave out integral components, such as inlets and outlets that commonly break during installation. CARDONE engineers pay special attention to proper vane size and shape on each application to maintain proper flow, while other brands consolidate vane sizes for their own convenience.
Product Features:
See More
Product Features:
- 100% testing of all units guarantees reliable performance every time
- High temperature grease extends bearing life, resulting in longer pump life
- New carbon shoes/vanes on every unit ensure accurate air output to meet today’s stringent emissions standards
- Guaranteed fit and function
- Meets or exceeds O.E.M performance
Cardone – Smog Air Pump (Part No.32-209)
from
$157.99
CARDONE Remanufactured Smog Pumps are engineered for quick installation and no comebacks. These pumps come with all necessary components for easy installation, while other brands leave out integral components, such as inlets and outlets that commonly break during installation. CARDONE engineers pay special attention to proper vane size and shape on each application to maintain proper flow, while other brands consolidate vane sizes for their own convenience.
Product Features:
See More
Product Features:
- 100% testing of all units guarantees reliable performance every time
- High temperature grease extends bearing life, resulting in longer pump life
- New carbon shoes/vanes on every unit ensure accurate air output to meet today’s stringent emissions standards
- Guaranteed fit and function
- Meets or exceeds O.E.M performance
Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1001)
from
$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)
from
$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Spectra Premium – Fuel Tank (Part No.CR4D)
from
$292.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Lock ring included with each tank to reduce installation time and to ensure a complete repair
- Made with corrosion resistant, OE approved, Ni Terne steel for durability
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)
from
$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)
from
$15.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
NTK – Switching Oxygen Sensor: 4 Wire, 23.25" Long, Heated, Direct Fit (Part No.23023)
from
$50.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
DENSO – Oxygen Sensor: Upstream, 3 Wire, 12.83" Long, Heated, Exact Fit (Part No.234-3003)
from
$58.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (Part No.15729)
from
$69.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4210)
from
$80.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
DENSO – Oxygen Sensor: Upstream, 4 Wire, 11.81" Long, Heated, Exact Fit (Part No.234-4004)
from
$63.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
NTK – Switching Oxygen Sensor: 4 Wire, 57.75" Long, Heated, Direct Fit (Part No.23035)
from
$83.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Bosch – Oxygen Sensor: 3 Wire, 12.91" Long, Heated, Exact Fit (Part No.13190)
from
$48.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
DENSO – First Time Fit Oxygen Sensor (Part No.C5010117237ND)
from
$66.11
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:
See More
Product Features:
- SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
DENSO – Oxygen Sensor: 4 Wire, 23.82" Long, Heated, Exact Fit (Part No.234-4003)
from
$84.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Popular 1983 Dodge B150 Fuel and Emissions Systems Categories
1983 Dodge B150 Fuel and Emissions Systems
You count on your 1983 Dodge B150 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 45 Fuel and Emissions Systems ranging in price from $1.99 to $292.99, you’re sure to find everything you need for your 1983 Dodge B150.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 13 different brands like Carquest Premium, Motorad, and Felpro. 1983 Dodge B150 Fuel and Emissions Systems start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 2,026 extensive product reviews on 1983 Dodge B150 Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Electric Fuel Pump with 2.5 stars and Locking Fuel Cap with 4.3 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1983 Dodge B150 below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1983 Dodge B150
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1983 Dodge B150 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Motorad, Felpro, and even more.
Popular Felpro Fuel and Emissions Systems
You’ll find popular Felpro brand products across Fuel Pumps and Exhaust Gas Recirculation (EGR) Parts. All are waiting to get your 1983 Dodge B150 back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Carquest Premium Fuel and Emissions Systems
If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 1983 Dodge B150, and some of our most reviewed Carquest Premium parts include:
from
$21.79
(50)
Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
Gas Caps
FAQs for 1983 Dodge B150 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1983 Dodge B150?
Out of 45 Fuel and Emissions Systems for the 1983 Dodge B150, the most popular in our inventory are:
from
$23.99
This product is not rated
Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack
Gas Caps
What are the top-rated 1983 Dodge B150 Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1983 Dodge B150 based on customer reviews/ratings are:
from
$23.99
(35)
Locking Fuel Cap
“Had a check engine light and when I scanned it, calls for a new gas cap. Instead of buying oem from the dealer or just an ordinary gas cap from a part”
from
$24.99
(32)
Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“Lost old gas cap and replaced with this one, which comes with a lock (which you don’t have to use,FYI)”
