1983 Chevrolet K20 Exhaust Parts

Essential 1983 Chevrolet K20 Exhaust Parts

Flowmaster Inc. – 50 Series Muffler, 2.5in Center Inlet 2in Dual Offset Outlet, Non-Reversible, Moderate Sound (Part No.9425502)

50 Series Muffler, 2.5in Center Inlet 2in Dual Offset Outlet, Non-Reversible, Moderate Sound

from

$149.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.8042543)

40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound

from

$123.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – Prebent Tailpipes – 2.50 in. Side Exit – Pair (Part No.15803)

Prebent Tailpipes - 2.50 in. Side Exit - Pair

from

$211.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More

Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.25 (Part No.35336)

Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.25

from

$2.49
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS – Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.5 (Part No.35337)

Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.5

from

$8.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS – Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94016)

Standard Grade Federal / EPA Compliant Universal Catalytic Converter

from

$126.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94016 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.93432)

Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$201.99
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93432. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1975-1986 Chevrolet C10, 1975-1986 Chevrolet K10, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – Bracket Bolt On Length 4.5 (Part No.35358)

Bracket Bolt On Length 4.5

from

$10.99
Walker, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker is a ‘one-stop’ convenience, offerin

Product Features:
  • Offered in a variety of styles and sizes for your installation needs
  • New Walker accessories help to ensure effective exhaust repairs
  • Constructed from durable and robust material for long life
  • Designed to work seamlessly with OE and Walker aftermarket replacement parts
  • Walker supplies all of the accessories you need to do the complete exhaust job
See More

Dorman – Double Ended Stud – 3/16-16 x 1-5/8in and 3/8-16 x 3-1/4in (Part No.29201)

Double Ended Stud - 3/16-16 x 1-5/8in and 3/8-16 x 3-1/4in

from

$9.99
This exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, this hardware is engineered for reliable performance.

Product Features:
  • Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
  • Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
  • Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Hooker Headers – Competition Header (Part No.2453-1HKR)

Competition Header

from

$635.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

JBA Performance – 1830S-6JS 1 5/8" Header Shorty Stainless Steel GM Truck 5.0/5.7L with Carburetor Silver Ceramic (Part No.1830S-6JS)

1830S-6JS 1 5/8" Header Shorty Stainless Steel GM Truck 5.0/5.7L with Carburetor Silver Ceramic

from

$956.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:
  • JBA Performance Exhaust 1830S-6JS 1 5/8″ Header Shorty Stainless Steel GM Truck 5.0/5.7L with Carburetor Silver Ceramic
  • Mandrel bent stainless steel tube
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.9672)

Exhaust Pipe Flange Gasket

from

$5.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.60986)

Exhaust Pipe Flange Gasket

from

$4.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

ARP Auto Racing – ARP Header Bolt Kit (Part No.100-1402)

ARP Header Bolt Kit

from

$69.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless steel kit with 12-point nuts. The stainless material is not affected by corrosion or extreme heat, making it ideal for the application. What’s more, the compact 12-point nut lets you easily slip a socket close to the pipe. Each ARP accessory stud or bolt kit includes the specific number of parts for your appliaction, plus premium-quality washers and hex or 12-point nuts, as required. Studs are manufactured with a unique nut-starter nose that helps prevent cross-threading. Studs and bolts come either Black Oxide chrome moly or Stainless. Both are nominally rated at 180,000 psi tensile strength; substantially stronger than Grade 8 hardware. Specially drilled NASCAR models are available for those who wish to safety wire their bolts to prevent loosening.

Product Features:
  • 3/8″-16 Thread Size(s)
  • Steel
  • Black Oxide
  • Small Block Chevy
  • 12-Point Head
  • Set of 12
  • 1.670″ Overall Length
See More

Felpro – Intake and Exhaust Manifolds Combination Gasket (Part No.MS 9786)

Intake and Exhaust Manifolds Combination Gasket

from

$17.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Premium quality parts
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
See More

Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66125)

Seal-4-Good Header Flange Gasket

from

$48.99
Seal-4-Good Header Flange Gasket

Flowtech – HEADER FLT BLOCK HUGGER (Part No.10010FLT)

HEADER FLT BLOCK HUGGER

from

$75.99
HEADER FLT BLOCK HUGGER

Walker – Front Pipe Aluminized 71.375" (Part No.47523)

Front Pipe Aluminized 71.375"

from

$57.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

ARP Auto Racing – For Use With Chevy Big Block, 3/8"-16, 0.75"L, Hex Head, Black Oxide, Set Of 16 (Part No.100-1102)

For Use With Chevy Big Block, 3/8"-16, 0.75"L, Hex Head, Black Oxide, Set Of 16

from

$24.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.

Product Features:
  • Material Is Not Affected By Corrosion Or Extreme Heat
  • The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
  • Substantially Stronger Than Grade 8 Hardware
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Set of 16
  • 0.75″ Overall Length
See More

ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 1"L, Hex Head, Natural, Ss, Set Of 12 (Part No.400-1111)

For Use With Chevy Small Block, 3/8"-16, 1"L, Hex Head, Natural, Ss, Set Of 12

from

$44.49
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.

Product Features:
  • Material Is Not Affected By Corrosion Or Extreme Heat
  • The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
  • Substantially Stronger Than Grade 8 Hardware
  • Nominally Rated At 170,000 Psi Tensile Strength
  • 3/8″-16 Thread Size
  • 1″ Underhead Length
See More

Flowtech – Super Street; Header Dual Kit (Part No.51525FLT)

Super Street; Header Dual Kit

from

$235.99


Product Features:
  • Increase Performance
  • Heavy Duty
  • Header Dual Kit
  • Includes All Hardware
  • Installation Instructions
  • Offer Maximum Versatility
  • Mufflers Not Included
See More

Flowtech – Super Street; Manifold Dual Kit (Part No.52525FLT)

Super Street; Manifold Dual Kit

from

$285.99


Product Features:
  • Increase Performance
  • Heavy Duty
  • Manifold Dual Kit
  • Includes All Hardware
  • Installation Instructions
  • Offer Maximum Versatility
  • Mufflers Not Included
See More

Walker – Y Pipe Aluminized 35" (Part No.40412)

Y Pipe Aluminized 35"

from

$178.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Walker – Y Pipe Aluminized 40" (Part No.40365)

Y Pipe Aluminized 40"

from

$171.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)

Terminator; Exhaust Tips

from

$85.99


Product Features:
  • Show Quality Chrome Platinum
  • Durable Black Finish
  • Can Be Welded Or Clamped
  • Complete The System
  • Glass-Packed Resonators
See More

1983 Chevrolet K20 Exhaust Parts

You count on your 1983 Chevrolet K20 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 87 Exhaust Parts ranging in price from $1.99 to $956.99, you’re sure to find everything you need for your 1983 Chevrolet K20.

Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 14 different brands like Felpro, Mr. Gasket, and Flowtech. 1983 Chevrolet K20 Exhaust Parts start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 436 extensive product reviews on 1983 Chevrolet K20 Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed with 4.6 stars and Terminator; Exhaust Tips with 4.0 stars.

Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1983 Chevrolet K20 below to get started!

Top-Rated Exhaust Parts Brands For Your 1983 Chevrolet K20

Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1983 Chevrolet K20 running right for years to come. In our inventory you’ll find brands like Felpro, Mr. Gasket, Flowtech, and even more.

Popular Dorman Exhaust Parts

You’ll find popular Dorman brand products across Exhaust Hangers and Exhaust Manifold and Headers. All are waiting to get your 1983 Chevrolet K20 back on the road. Some of the top-rated Dorman products in these categories are:
Double Ended Stud - 3/16-16 x 1-5/8in and 3/8-16 x 3-1/4in
from $9.99
(1)
Double Ended Stud – 3/16-16 x 1-5/8in and 3/8-16 x 3-1/4in
Exhaust Hangers and Hardware
Direct Fit Exhaust Manifold: With Heat Shield
from $191.99
(2)
Direct Fit Exhaust Manifold: With Heat Shield
Exhaust Manifold and Headers

Top-Rated Felpro Exhaust Parts


If Felpro are what you’re looking for, our inventory holds plenty. We stock Felpro brand Exhaust Parts for your 1983 Chevrolet K20, and some of our most reviewed Felpro parts include:
Exhaust Manifold Gasket Set
from $19.99
(21)
Exhaust Manifold Gasket Set
Exhaust Manifold Gaskets
Exhaust Pipe Flange Gasket
from $2.99
(15)
Exhaust Pipe Flange Gasket
Exhaust Pipe and Flange Gaskets
Exhaust Pipe Flange Gasket
from $5.29
(10)
Exhaust Pipe Flange Gasket
Exhaust Pipe and Flange Gaskets

FAQs for 1983 Chevrolet K20 Exhaust Parts

What are the most purchased Exhaust Parts for the 1983 Chevrolet K20?

Out of 87 Exhaust Parts for the 1983 Chevrolet K20, the most popular in our inventory are:
High-Performance Mandrel-Bent Headers with Leakproof O-Ring Seals
from $226.99
(13)
High-Performance Mandrel-Bent Headers with Leakproof O-Ring Seals
Exhaust Manifold and Headers
Aluminum Exhaust Gaskets for Intense Heat Resistance
from $42.99
(4)
Aluminum Exhaust Gaskets for Intense Heat Resistance
Exhaust Manifold Gaskets
Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal
from $42.99
This product is not rated
Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal
Exhaust Manifold Gaskets

What are the top-rated 1983 Chevrolet K20 Exhaust Parts?

Top-rated Exhaust Parts for your 1983 Chevrolet K20 based on customer reviews/ratings are:
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
from $167.99
(5)
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
“Replaced stock converter and would use again.”
Terminator; Exhaust Tips
from $85.99
(5)
Terminator; Exhaust Tips
“very nice…worth the money.”