1983 Chevrolet El Camino Performance Exhaust Products

Essential 1983 Chevrolet El Camino Performance Exhaust Products

Flowmaster Inc. – Prebent Tailpipes – 2.50 in. Rear Exit – Pair (Part No.15817)

Prebent Tailpipes - 2.50 in. Rear Exit - Pair

from

$212.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More

Flowmaster Inc. – Prebent Tailpipes – 3.00 in. Rear Exit – Pair (Part No.15819)

Prebent Tailpipes - 3.00 in. Rear Exit - Pair

from

$247.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More

Flowtech – Ceramic Header (Part No.31130FLT)

Ceramic Header

from

$492.99


Product Features:
  • Fuel Economy From The Engine
  • Leak Test For Max Performance
  • Ceramic Headers
  • Rust And Corrosion Resistance
  • Mandrel-Formed Power Plenum
  • Leakproof O-Ringed Port Seals
  • Include All Mounting Hardware
See More

Hooker Headers – Super Comp. Header (Part No.2124HKR)

Super Comp. Header

from

$551.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • Long Tube Lengths
  • Long Transition Collectors
  • Monstrous Low-Mid Range Torque
  • Keep Top End Horsepower
  • Provides Finest Fit
  • Most Durable Design Available
See More

Hooker Headers – Competition Header (Part No.2451-2HKR)

Competition Header

from

$861.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

Hooker Headers – Super Comp. Header (Part No.2242-1HKR)

Super Comp. Header

from

$1189.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • Long Tube Lengths
  • Long Transition Collectors
  • Monstrous Low-Mid Range Torque
  • Keep Top End Horsepower
  • Provides Finest Fit
  • Most Durable Design Available
See More

Flowtech – Standard Header (Part No.11130FLT)

Standard Header

from

$258.99


Product Features:
  • Fuel Economy From The Engine
  • Leak Test For Max Performance
  • Mandrel-Formed Power Plenum
  • Leakproof O-Ringed Port Seals
  • Include All Mounting Hardware
See More

Hooker Headers – Super Comp. Header (Part No.2250HKR)

Super Comp. Header

from

$791.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • Long Tube Lengths
  • Long Transition Collectors
  • Monstrous Low-Mid Range Torque
  • Keep Top End Horsepower
  • Provides Finest Fit
  • Most Durable Design Available
See More

Hooker Headers – Competition Header (Part No.2451-3HKR)

Competition Header

from

$727.99
Competition Header

Dynomax – Header (Part No.85001)

Header

from

$132.99
Manufactured and marketed by Tenneco Inc. (NYSE: TEN), DynoMax® Performance Exhaust is a leading brand of dyno-proven exhaust products for muscle cars, pass cars, diesel and gas trucks, Jeeps and sport utility vehicles. DynoMax® products – engineered for “Pure Unadulterated Power” – include complete cat-back and axle-back performance exhaust systems; performance mufflers and the industry exclusive VT valve technology muffler; and a large assortment of accessories and related exhaust products. Each DynoMax® product has the benefits of worldwide global engineering resources. The DynoMax® brand is backed by an aggressive marketing program, including a national events program; easy-to-use website and digital and printed catalog; in-depth technical and installation information and tech line; and advertising program.Product Features:
  • Dynomax® Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax® product is backed by engineers who know what you want and expect out of a performance exhaust product.
  • Hardware and accessories provide OE-style features and design for greater durability for longer service life
  • Hardware and accessories provide OE-style fit and finish for easy use and installation
  • Hardware and accessories are manufactured to work seamlessly with all Dynomax® performance parts, making installation quick and easy
  • Hardware and accessories are manufactured from premium steel to provide greater durability
See More

Mr. Gasket – Exhaust Gasket Set (Part No.150)

Exhaust Gasket Set

from

$25.99
Mr. Gasket has three types of exhaust gaskets–standard, Ultra Seal, and Copperseal. Use the standard for a stock rebuild and the Ultra or Copperseal for extra blowout protection.

Product Features:
  • High-temperature exhaust material
  • Withstands extreme exhaust heat
  • Provides excellent sealing and durability
  • Superior tensile strength
  • Resists deteriorating
  • Provides excellent torque retention
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)

Exhaust Manifold Gasket Set

from

$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Ultra Seal; Exhaust Gasket Set (Part No.5900)

Ultra Seal; Exhaust Gasket Set

from

$30.99
Graphite impregnated facing and a steel expanded metal core. Superior tensile strength. Resists cracking and withstands intense heat. Resists deteriorating. Anti-stick properties and easy removal for disassembly.

Product Features:
  • Graphite-impregnated facing
  • Steel expanded metal core
  • Superior tensile strength
  • Resists cracking
  • Withstands intense heat
  • Resists deteriorating
  • Anti-stick properties
  • Easy removal for disassembly
See More

Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7150)

Copper Seal; Exhaust Gasket Set

from

$57.99
Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.

Product Features:
  • Will Not Shrink/Deteriorate
  • Creates A Tight Leak Proof Seal
  • Helps Lower Under hood Temps
  • Seals Irregular Surfaces
  • Seals Slightly Damaged Surface
  • Ideal For Tow Vehicles
  • Ideal For Motor Homes
See More

Flowtech – Real-Seal; Header Gasket (Part No.99153FLT)

Real-Seal; Header Gasket

from

$77.99


Product Features:
  • Water/Weather Resistant
  • Re-Useable
  • Will Not Burn Or Blow Out
  • Suitable For Port-Matching
  • Made In USA
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1448)

Exhaust Manifold Gasket Set

from

$34.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Exhaust Gasket Set (Part No.6452)

Exhaust Gasket Set

from

$20.99
Mr. Gasket has three types of exhaust gaskets–standard, Ultra Seal, and Copperseal. Use the standard for a stock rebuild and the Ultra or Copperseal for extra blowout protection.

Product Features:
  • Designed to provide excellent sealing and durability
  • Large fiber gasket material
  • Heat resistant
  • Reusable
  • Precision die cut for excellent fit
  • Limited warranty
See More

Mr. Gasket – Ultra Seal; Exhaust Gasket Set (Part No.5902)

Ultra Seal; Exhaust Gasket Set

from

$34.99
Graphite impregnated facing and a steel expanded metal core. Superior tensile strength. Resists cracking and withstands intense heat. Resists deteriorating. Anti-stick properties and easy removal for disassembly.

Product Features:
  • Withstands intense exhaust heat
  • Graphite-impregnated facing
  • Steel expanded metal core
  • Superior tensile strength
  • Resists deteriorating
  • Anti-stick properties
  • Easy removal for disassembly
See More

Edelbrock – Exhaust Manifold Gasket Set for Chevrolet (Part No.7204)

Exhaust Manifold Gasket Set for Chevrolet

from

$24.99
Product Features:
  • 0.0625 in. Thickness
  • 1.50 in. x 1.50 in. Port Size
  • For SB Chevy
  • Black Color
  • Two Piece Configuration
See More

Spectre – Alternator Bracket (Part No.4719)

Alternator Bracket

from

$30.99
This Spectre Alternator Bracket is an upper mount designed to fit 1969 and later Chevrolet Big Block engines with a long water pump. Featuring a triple chrome-plated finish and high quality steel construction, this part is an OEM replacement that mounts on the passenger’s side.

Product Features:
  • Fits Big Block Chevy engines with a long water pump from 1969 and later
  • Manufactured from high quality steel
  • Upper bracket for passenger side mounting
  • Features a triple chrome-plated finish
  • Stock replacement part
See More

Mr. Gasket – Side Mount Alternator Bracket (Part No.9852)

Side Mount Alternator Bracket

from

$22.99
Side mount header bracket. Made from heavy gauge chrome plated steel, these brackets are used to mount the alternator on small block Chevy applications.

Product Features:
  • Heavy gauge
  • Chrome plated steel
See More

Mr. Gasket – Alternator Bracket (Part No.4954)

Alternator Bracket

from

$16.99
Dress up your engine. These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated for lasting beauty, similar in design to OEM units, these brackets can be adapted to other engines.

Product Features:
  • Heavy gauge steel
  • Polished to high luster
  • Chrome plated for lasting beauty
See More

1983 Chevrolet El Camino Performance Exhaust Products

Maybe you’re in the middle of a full rebuild of that 1983 Chevrolet El Camino. Maybe you just need a couple of Performance Exhaust Products. Either way, Advance Auto Parts has 23 different Performance Exhaust Products in our inventory ranging from $16.99 to $1,189.99. That means you can find the exact parts or products you need to keep that 1983 Chevrolet El Camino running smoothly.

Performance Exhaust Products are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1983 Chevrolet El Camino. Mr. Gasket, FEL-PRO Performance, and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Exhaust Products for your 1983 Chevrolet El Camino, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 25 reviews in this category, some of the top rated parts include Competition Header with 1.0 stars.

So if you’re in the market for aftermarket Performance Exhaust Products to keep your 1983 Chevrolet El Camino rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Exhaust Products Brands To Make Your 1983 Chevrolet El Camino Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1983 Chevrolet El Camino demands trusted brand parts and products to keep it running. Many trusted brands of Performance Exhaust Products make up Advance Auto Parts’ inventory, and all are ready to help make your El Camino the best it can be. Be sure to browse some of our top Performance Exhaust Products brands and parts.

Popular FEL-PRO Performance Performance Exhaust Products

We carry FEL-PRO Performance parts in our stock across Performance Exhaust Manifold Gaskets categories, plus more. For a 1983 Chevrolet El Camino, our most popular FEL-PRO Performance Performance Exhaust Products include:
Exhaust Manifold Gasket Set
from $31.49
(2)
Exhaust Manifold Gasket Set
Performance Exhaust Manifold Gaskets

Top 1983 Chevrolet El Camino Performance Exhaust Products from Mr. Gasket

Mr. Gasket products are another trusted brand when it comes to Performance Exhaust Products for your 1983 Chevrolet El Camino. Popular Mr. Gasket parts include:
Exhaust Gasket Set
from $19.99
(14)
Exhaust Gasket Set
Performance Exhaust Manifold Gaskets
Aluminum Exhaust Gasket
from $40.99
(4)
Aluminum Exhaust Gasket
Performance Exhaust Manifold Gaskets
Exhaust Gasket Set
from $25.99
(4)
Exhaust Gasket Set
Performance Exhaust Manifold Gaskets

FAQs for 1983 Chevrolet El Camino Performance Exhaust Products

What are the most purchased Performance Exhaust Products for the 1983 Chevrolet El Camino?

Out of 23 Performance Exhaust Products for the 1983 Chevrolet El Camino, the most popular in our inventory are:
Exhaust Gasket Set
from $25.99
This product is not rated
Exhaust Gasket Set
Performance Exhaust Manifold Gaskets
Ultra Seal; Exhaust Gasket Set
from $30.99
This product is not rated
Ultra Seal; Exhaust Gasket Set
Performance Exhaust Manifold Gaskets
Exhaust Manifold Gasket Set
from $27.49
This product is not rated
Exhaust Manifold Gasket Set
Performance Exhaust Manifold Gaskets

What are the top-rated 1983 Chevrolet El Camino Performance Exhaust Products?

Top-rated Performance Exhaust Products for your 1983 Chevrolet El Camino based on customer reviews/ratings are:
Competition Header
from $619.99
(1)
Competition Header
“I loved the materials used and and the product. Advanced AP has gone way beyond everyone else for their customer service. Now for the issues with the ”