1983 Chevrolet Camaro Differentials

Essential 1983 Chevrolet Camaro Differentials

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

from

$27.99
8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:
  • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
See More

Pro-King – Rear Axle Shaft Kit (Part No.AXK-180)

Rear Axle Shaft Kit

from

$173.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:
  • High strength steel
  • Dual heat treating process
See More

Yukon Gear – Standard Open Spider Gear Kit For GM 12 Bolt Car And Truck With 30 Spline Axles (Part No.16043)

Standard Open Spider Gear Kit For GM 12 Bolt Car And Truck With 30 Spline Axles

from

$207.99
Yukon standard open spider gear kit for GM 12P and 12T with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits GM 12 bolt passenger car and truck open differential with 30 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Yoke For GM 7.5" And 7.625" (Mech 3R) In A Triple Lip Design (Part No.41088)

Yoke For GM 7.5" And 7.625" (Mech 3R) In A Triple Lip Design

from

$154.99
Yukon yoke for GM 7.5″ and 7.625″ (mech 3R) in a triple lip design. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. This yoke uses inside clips. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 7.5″ and 7.625″
  • 27 spline
  • Mechanics 3R u-joint size
  • 2.556″ snap ring span
  • 1.125″ cap diameter
  • Inside snap ring design
  • Strap style
See More

Yukon Gear – Minor Install Kit For GM 8.2" Differential (Part No.12052)

Minor Install Kit For GM 8.2" Differential

from

$151.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (with Supershims).

Product Features:
  • Fits GM 8.2″
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

Yukon Gear – Crush Sleeve Eliminator Kit For GM 8.5" & Chrysler 9.25" (Part No.55048)

Crush Sleeve Eliminator Kit For GM 8.5" & Chrysler 9.25"

from

$57.99
Product Features:
  • Crush sleeve eliminator kit for GM 8.5″, 8.6″ and Chrysler 9.25″ rear
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

USA Standard Gear – Pinion Installation Kit For ’82-’99 GM 7.5" & 7.625" (Part No.60010)

Pinion Installation Kit For '82-'99 GM 7.5" & 7.625"

from

$153.99
7.5″ & 7.625″ GM 82-99 PINION KIT .

Product Features:
  • Fits 1982-1999 GM 7.5″ and 7.625″
  • Uses Koyo bearings and races
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

Yukon Gear – 7/16" To 3/8" Ring Gear Bolt Spacer Sleeve. (Part No.33056)

7/16" To 3/8" Ring Gear Bolt Spacer Sleeve.

from

$7.99
7/16″ TO 3/8″ ring gear bolt spacer sleeve.

Product Features:
  • Ring gear bolt sleeve
  • Adapts 7/16″ to 3/8″
See More

Richmond Gear – RngPnn (Part No.79-0064-1)

RngPnn

from

$511.99
RngPnn

Yukon Gear – Posi Spring Kit For GM 7.5", With Preload Plates (Part No.33206)

Posi Spring Kit For GM 7.5", With Preload Plates

from

$153.99
Product Features:
  • Positraction spring kit
  • Fits GM 7.5″ and 7.625″ Dura Grip
  • Includes preload plates
See More

Yukon Gear – Dura Grip Case, GM 7.5 & 7.625", 3.23 & Up (Part No.20106)

Dura Grip Case, GM 7.5 & 7.625", 3.23 & Up

from

$399.99
GM 7.5″ & 7.6″ DURA GRIP case, bare, 3.23 & up, 26spline & 28spline.

Product Features:
  • Dura Grip positraction carrier case
  • Does not include spider gears
  • Fits GM 7.5″ and 7.625″
  • 3.23 and up ratios only
See More

National – Bearings (Part No.JLM506849A)

Bearings

from

$38.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Bearing Race Driver (Part No.56015)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM88610 race
  • All steel construction
See More

Mr. Gasket – Differential Gasket (Part No.84B)

Differential Gasket

from

$18.09
Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1964-1970 Chevrolet 8.2 inch 10 bolt & 1970-1981 GM 8.5 inch ring gear

Product Features:
  • .047″ thick cellulose/nitrile composite gasket material
  • Precision die cut
  • Reusable
See More

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

Yukon Gear – Standard Open And Positraction Pinion Gear And Thrust Washer For 8.2" GM CI Corvette (Part No.33305)

Standard Open And Positraction Pinion Gear And Thrust Washer For 8.2" GM CI Corvette

from

$34.99
Standard open and positraction pinion gear thrust washer for 8.2″ GM CI Corvette.

Product Features:
  • Pinion gear thrust washer
  • Fits GM 8.2″ and 1963-1979 Corvette
See More

Motive Gear – Differential Gear Install Kit (Part No.GM12IKC)

Differential Gear Install Kit

from

$64.49


Product Features:
  • MINI INSTALL KIT GM 12BLT 8.875 CAR
See More

Motive Gear – Differential Carrier Gear Kit (Part No.GM7.6BI)

Differential Carrier Gear Kit

from

$159.99


Product Features:
  • INTERNAL KIT-GM 7.6″ W/28 SPLINE
See More

Motive Gear – Differential Mini Spool (Part No.MS7.5-28)

Differential Mini Spool

from

$101.99


Product Features:
  • MINI SPOOL GM 7 1/2″ 28 SPLINE
See More

Yukon Gear – Replacement Chrome Cover For Dana 44 (Part No.32004)

Replacement Chrome Cover For Dana 44

from

$67.99
0.080″ thick Chrome replacement cover for Dana 44.

Product Features:
  • Fits standard rotation Dana Spicer 44
  • Chrome
See More

Yukon Gear – Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5" (Part No.55001)

Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5"

from

$59.99
Product Features:
  • Super carrier shim kit for Ford 7.5″, GM 7.5″, 7.625″, 7.6″ IFS, 7.6″ IRS, 7.75″, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and GM 8.5″ front and rear
  • Interlocking design makes installation much easier
See More

Yukon Gear – Carrier Installation Kit For GM 8.5" Differential With HD Bearings (Part No.57009)

Carrier Installation Kit For GM 8.5" Differential With HD Bearings

from

$148.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.5″ differential with HD bearings for large journal carrier. This kit contains carrier bearings, races and shims. This kit is used in 8.5″ differentials using a Yukon Dura Grip, Eaton posi, ValueTrac, True Trac, Pro-Series Auburn, Detroit Locker or standard carrier with large bearing journals.

Product Features:
  • Fits GM 8.5″ with aftermarket positraction
  • Works with Heavy Duty Bearings
  • Includes carrier bearings and races and “super” carrier shim kit
See More

National – Shaft Repair Sleeve (Part No.99152)

Shaft Repair Sleeve

from

$40.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Positraction Cross Pin Bolt For GM 12 Bolt Car And Truck (Part No.33344)

Positraction Cross Pin Bolt For GM 12 Bolt Car And Truck

from

$28.99
Positraction cross pin bolt for GM 12P and 12T.

Product Features:
  • Cross pin bolt for GM 12 bolt passenger car and truck
  • For OEM positraction applications only
See More

Yukon Gear – Mini Spool For GM 7.5" With 26 Spline Axles (Part No.32228)

Mini Spool For GM 7.5" With 26 Spline Axles

from

$277.99
Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 7.5″ with 26 spline axles
  • Provides 100% traction to both wheels at all times
  • Installs into standard open carrier case
See More

National – Bearings (Part No.HM807046)

Bearings

from

$59.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.HM89446)

Bearings

from

$36.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

1983 Chevrolet Camaro Differentials

Maybe you’re in the middle of a full rebuild of that 1983 Chevrolet Camaro. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 144 different Differentials in our inventory ranging from $2.49 to $1,014.99. That means you can find the exact parts or products you need to keep that 1983 Chevrolet Camaro running smoothly.

Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1983 Chevrolet Camaro. Valvoline, Driveworks, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1983 Chevrolet Camaro, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 3,065 reviews in this category, some of the top rated parts include Rear Differential Cover with 4.5 stars and Bearings with 4.7 stars.

So if you’re in the market for aftermarket Differentials to keep your 1983 Chevrolet Camaro rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1983 Chevrolet Camaro Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1983 Chevrolet Camaro demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Camaro the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Rear Differential Cover Gaskets categories, plus more. For a 1983 Chevrolet Camaro, our most popular Felpro Differentials include:
DIFFERENTIAL GASKET
from $7.99
(45)
DIFFERENTIAL GASKET
Rear Differential Cover Gaskets

FAQs for 1983 Chevrolet Camaro Differentials

What are the most purchased Differentials for the 1983 Chevrolet Camaro?

Out of 144 Differentials for the 1983 Chevrolet Camaro, the most popular in our inventory are:
Taper Bearing Set
from $10.29
(38)
Taper Bearing Set
Differential Bearings
Bearings
from $16.99
(25)
Bearings
Differential Bearings
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
Differential Pinion Shaft Lock Bolts

What are the top-rated 1983 Chevrolet Camaro Differentials?

Top-rated Differentials for your 1983 Chevrolet Camaro based on customer reviews/ratings are:
Rear Differential Cover
from $20.99
(38)
Rear Differential Cover
“Looks great, face lift for the rear differential. Old one was rusted & in bad shape. Just remember to get the correct size.”
Bearings
from $18.79
(3)
Bearings
“as advertised”
Wheel Bearing and Seal Kit
from $151.99
(2)
Wheel Bearing and Seal Kit
“All you need to overhaul a diff, at a good price”