1983 AMC Concord Drivetrains

Below you will find various in-demand AMC Drivetrains, components and accessories for your 1983 Concord. Advance Auto Parts has popular Concord parts like Drive Shafts and Axles, Differentials, Transfer Cases and more. You’ll also find aftermarket and OEM Drivetrains for other Concord model years including 1978, 1979, 1980, 1981, 1982 and more. Select a category of 1983 AMC Concord Drivetrains below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1983 AMC Concord Drivetrains Categories

Differential Oil

Axle Shaft Universal Joints

U-Joints

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

U-Joint Strap Kits

Differential Pinion Shaft Lock Bolts

Differential Bearings

Drive Shaft Bearings

U-Joint Centering Yokes

Differential Cover Bolts

Axle Shaft Bearings

Differential Carriers

Differential Bearing Kits

Input Shaft Bearings

Front Differential Pinion Bearings

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Ring and Pinions

Differential End Yokes

Spindle Lock Nuts

Differential Lock Assemblies

Differential Spools

Differential Carrier Bearings

Rear Housing Cover Gaskets

Differential Pinion Bearing Kits

Axle Shaft Seal Retainers

Transfer Case Differential Bearings

Drive Shaft Seals

Differential Ring Gear Bolts

Bearing Race Drivers

Spindle Lock Nut Thrust Washers

Input Shaft Seals

Spindle Retainers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Gear Thrust Washers

Axle Shaft Studs

Spindle Washers

Differential Ring and Pinion Kits

Essential Drivetrains for 1983 AMC Concords

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$9.99

Pinion seal for Model 20 and Model 35.Yukon Mighty seal.

Product Features:

Pinion seal
Fits AMC Model 20 and AMC Model 35

from

$269.99

Product Features:

Fits AMC Model 20
3.08 and up ratio only
Provides 100% traction to both wheels at all times
Not recommended for street driven vehicles

from

$98.99

Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for AMC Model 35 differential. This kit contains carrier bearings, races and shims.

Product Features:

Fits AMC Model 35 with 27 spline axles
Includes carrier bearings and races and “super” carrier shim kit

from

$30.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$4.99

This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$109.99

Yukon 1310 to Mechanics 3R adapter U/Joint.

from

$10.99

Product Features:

Pinion gear thrust washer
Fits AMC Model 35
0.685″ I.D.
With step

from

$526.69

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!

from

$197.99

Yukon standard open spider gear kit for Model 35 with 27 spline axles. hubs have 1.560″ diameter (used in ’94 and newer models). Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects. *May work with ’93 model with 1.5600″ journal.

Product Features:

Spider gear kit
Fits AMC Model 35 open differential with 1.560″ side gear bore
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$275.99

If you’re repairing or rebuilding a front or rear differential and want the best performance and longevity from the bearings being replaced, choose this premium differential kit. It includes high-precision bearings manufactured to tighter tolerances and engineered to last longer than common lower-grade bearings that have more backlash when subjected to the torque generated within the differential. This convenient kit also saves the time needed to source individual components. Check the product attributes and fitment details to select the correct premium differential kit for your application.

Product Features:

Ideal solution – this premium differential bearing kit features high-precision bearings to help ensure longer bearing life, prevent backlash, and restore proper differential operation
Direct replacement – the components in this all-in-one kit are engineered to precisely match the fit and function of the original equipment bearings for a seamless installation
Increased reliability – the premium bearings in this kit are manufactured to exacting tolerances and specifications from high quality materials to help ensure optimal performance
Application-specific – check the product attributes and fitment details to choose the correct kit for your application
Contents: Bearings; Shims; Crush Collar; Hardware; Gasket Material; Gear Marking Compound; Application Brush; Thread Lock Compound

from

$9.99

Model 35 standard Open side gear Thrust washer. Fits 1.625″ side gear bore only.

Product Features:

Side gear thrust washer
Fits AMC Model 35

from

$17.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$4.99

Product Features:

Brand may vary by location

from

$10.99

Model 35 C/clip.

Product Features:

c-clip for AMC Model 35

from

$3.99

Replacement ring gear bolt for Model 20, Grand Cherokee 35, “Super” Dana 30 & Dana 50. 7/16″ x 20.

Product Features:

Ring gear bolt for AMC Model 20, “Super” 35, Dana Spicer “Super” 30 and Dana Spicer 50
7/16″ 20 thread

from

$242.99

Yukon long yoke for Model 35 with a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. Not common. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits AMC Model 35
26 spline
1330 u-joint size
Outside snap ring design
3.625″ snap ring span
1.062″ cap diameter
Strap style

from

$27.99

8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:

Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″

from

$89.99

Worn or damaged differential end yoke causing driveline vibrations- This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:

Direct replacement – this differential end yoke matches the fit and construction of the original yoke
Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
Validated fit – this differential end yoke has been tested to confirm accurate fit

from

$8.29

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$52.79

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$2.99

Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$10.99

Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25″, 10.5″ & some 9.75″. 7/8-20 thread, 1 1/8 socket.

Product Features:

Pinion nut for Jeep JK front, Jeep Liberty front, Ford 9.75″, 10.25″, 10.5″ and AMC Model 20 and Model 35
7/8″ x 20 thread
1 1/8″ socket

from

$16.99

Standard open cross pin shaft (.750″) for Ford 8″, 8.8″, 9″ and Model 20.

Product Features:

Cross pin shaft for Ford 8″, 8.8″ and 9″ and AMC Model 20
Fits standard open differentials only
0.750″ diameter

from

$74.99

Chrome cover for AMC Model 20.

Product Features:

Fits AMC Model 20
Chrome

from

$431.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits standard rotation AMC Model 35
7.562″ ring gear diameter
26 spline pinion
8 ring gear bolts
3.07 ratio

from

$13.99

Model 35 (standard Open & TracLoc) 8.25″ Chrysler TracLoc cross pin bolt.

Product Features:

Cross pin bolt for AMC Model 35 with c-clip axles

Upgrade your 1983 AMC Concord with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 1983 AMC Concord, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your AMC or enhancing its overall performance, Drivetrains are key to keeping your Concord functioning at its best. At Advance Auto Parts, we offer a wide selection of 133 Drivetrains for the 1983 AMC Concord, designed to meet your needs without breaking the bank. From Drive Shafts and Axle replacements to Differentials upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1983 AMC Concord at great prices. Our Drivetrains inventory for this model ranges from just $2.79 to $1,566.99, with an average price of $170.51. Our 133 Drivetrains in stock come from 14 trusted brands, so you’re sure to find the right part for your 1983 AMC Concord without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1983 AMC Concord, we stock popular OEM and aftermarket Drivetrains from top names like Moog, National, Dorman, and more. Moog Drivetrains start at just $22.99 and boast an impressive 4.5 stars average rating from customers. National and Dorman also bring quality to the table, with Drivetrains available starting at $3.49, and at an average 4.3 stars rating. With 2,574 customer reviews and counting, our 1983 AMC Concord Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1983 AMC Concord is always ready to roll. We’re committed to providing you with everything you need to keep your Concord in top shape, all in one place. Start shopping confidently below for your 1983 AMC Concord!

Best-Selling Drive Shafts and Axles for 1983 AMC Concords

Enhance the driving experience in your AMC with 9 quality Drive Shafts and Axle components, starting at $5.99.

show more show less

from

$38.99

You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.

from

$9.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$24.99

Manufactured with premium-grade steel, National cylindrical bearings are designed and engineered to meet OE specifications.

Product Features:

STRONG AND DURABLE: Controlled heat treatment process for strength and durability
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
Professional technicians know they can depend on National

from

$17.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$30.49

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$10.99

Model 35 C/clip.

Product Features:

c-clip for AMC Model 35

from

$5.99

Model 20 & Model 35 axle stud 0.620″ Dia. Shank.

Product Features:

Axle stud for AMC Model 20 and Model 35
1/2″ x 20 thread
0.620″ knurl diameter
1.625″ long

from

$5.99

Model 35 & other screw-inaxle stud, 1/2″ -20 x 1.5″.

Product Features:

Screw in axle stud for AMC Model 35
1/2″ x 20 thread
1.5″ long

from

$5.99

Product Features:

Rear axle stud for Dana Spicer 44 and AMC Model 35
1/2″ x 20 thread
0.618″ knurl diameter
1 15/32″ long
31/64″ shoulder length

Most Popular 1983 AMC Concord Differentials

Customize your AMC with 96 Differentials products like Differential Oil, Rear Housing Cover Gaskets, and Rear Differential Cover Gaskets, all priced under $1,566.99.

show more show less

from

$35.99

Valvoline MaxLife Multi-Vehicle ATF is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi. Recommended for use in the following applications: GM DEXRON-II, DEXRON-III, DEXRON-VI, Ford MERCON LV, Toyota/Lexus Type T, T-II, T-IV, WS, Honda/Acura, ATF-Z1, Nissan/Infiniti Matic-D, Matic-J, Matric-K, Matic-S, Hyundai/Kia SP-II, SP-III, SP-IV, SPH-IV, BMW 7045E, ETL 8072B, LA2634, LT71141, Allison C-4, Mercedes Benz NAG-1, Volvo 1161521, 1161540, 97340, 1273.41, and VW/Audi G-052-025-A2, G-052-162-A1. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

Formulated with full-synthetic base oils and long life friction modifiers to help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$16.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$11.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$10.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$2.79

Product Features:

CRUSH SLEEVE 7.25 & 8.25 MIN ORDER 5000

from

$196.99

Product Features:

DANA-35 R/P 4.11 STD

from

$179.99

This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.

Product Features:

Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications
Related repair – smart to have on hand when installing a differential ring and pinion
Durable construction – built for reliable Longevity, free of defects in materials and workmanship
Trustworthy quality – backed by team of designers and engineers in the United States

from

$8.29

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$57.99

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

from

$44.99

3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:

Includes three quarts of conventional oil

from

$11.99

Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8″ x 24.

Product Features:

Ring gear bolt for Dana Spicer 25, 27, 30, 44 and AMC Model 35
3/8″ x 24 thread

from

$9.99

5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:

Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
1/2″ head

from

$9.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$10.99

Crush Sleeve for Model 35, Chrysler 7.25″, 8.25″ Ford 8″ & GM 7.75″. Approx 0.495″ long.

Product Features:

Crush sleeve for AMC Model 35, Chrysler 7.25″ and 8.25″, Ford 8″ and GM 7.75″
0.495″ tall

from

$25.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$172.99

USA Standard Gear standard spider gear set for AMC Model 35 with 1.560″ side gear bore. (used in ’94 and newer models).

Product Features:

Fits AMC Model 35 with open differential and 1.560″ side gear bore
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$17.49

from

$137.99

Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil

from

$16.99

Product Features:

PINION SHIM-DANA 30,35.50

from

$9.99

Model 35 standard Open side gear Thrust washer. Fits 1.625″ side gear bore only.

Product Features:

Side gear thrust washer
Fits AMC Model 35

from

$191.99

Product Features:

DANA-35 R/P 3.73 STD

from

$221.99

Yukon trail repair kit for Model 35 with 1310 size U/joint and straps. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).

Product Features:

Fits AMC Model 35
1310 u-joint size
Kit includes yoke, U-joint, pinion seal, pinion nut and washer, straps, bolts and threadlocker

Top Picks for 1983 AMC Concord Transfer Cases

Upgrade AMC Concords with top-quality Transfer Cases parts, including 4 OEM and aftermarket selections for your 1983 model.

show more show less

from

$4.99

Product Features:

Design type: spring loaded; single-lip
Temperature range: -40 deg. F to 225 deg. F / -40 deg. C to 107 deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$15.49

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$10.49

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$7.69

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

In-Demand Spindles for 1983 AMC Concords

Select from 7 premium Spindles parts for your 1983 AMC Concord, with prices ranging from $3.49 to $5.99.

show more show less

from

$3.49

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.49

This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.99

Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.79

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.99

Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.29

Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.29

Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Most Sold 1983 AMC Concord Universal Joints

Explore our best-selling AMC parts for the 1983 Concord among 17 OEM and aftermarket options starting from $15.99.

show more show less

from

$22.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

For U-Joints 354, 369 & 437G
Contains two 1.59″ bolt center clamps and four 1/4-28 x 5/8″ cap screws

from

$31.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

Product Features:

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$35.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for fleets, off-highway and commercial vehicles
STRONG AND DURABLE – Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
GREASEABLE DESIGN – Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
INHIBITS PREMATURE WEAR – Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
RELIABLE PERFORMANCE – Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$33.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$41.49

Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASEABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$15.99

Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$18.99

1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.

Product Features:

u-joint strap kit
Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
1310 and 1330 u-joint size
Includes two straps and four bolts

from

$44.99

Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.

from

$59.99

Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.

from

$109.99

Yukon 1310 to Mechanics 3R adapter U/Joint.

from

$61.99

Yukon 1330 Dual-size cap U/Joint. 3.625″ snap ring span. One set of caps is 1.125″ in diameter and the other is 1.062″. Outside snap ring.

from

$89.99

Direct replacement – this differential end yoke matches the fit and construction of the original yoke
Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
Validated fit – this differential end yoke has been tested to confirm accurate fit

from

$53.99

1330 Yukon Lifetime U/Joint. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.

from

$51.99

Yukon 1330 U/Joint with zerk fitting. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.

from

$57.99

1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.

from

$115.99

Yukon yoke for Model 35 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits AMC Model 35
26 spline
1310 u-joint size
3.219″ snap ring span
1.062″ cap diameter
Outside snap ring design
Strap style

from

$44.99

Top-Rated Drivetrains Brands For Your 1983 AMC Concord

Shop for the best-rated brands offering Drivetrains and other products for your 1983 AMC Concords. Below you’ll find some of our best rated Drivetrains from Moog, National, and Dorman, and more. Drivetrains from these brands that fit a 1983 Concord start at just $3.49 and are rated as high as 4.5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 1983 AMC Concord Drivetrains

When it comes to maintaining or upgrading your 1983 AMC Concord, using quality Drivetrains is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Drivetrains, specifically designed for the 1983 AMC Concord. With over 3 Moog brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $22.99, with an average price of just $30.99. Plus, with over 144 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $35.99

(82)

Greaseable Premium Universal Joint

“Great u joints works very well I’ll recomended”

from $33.99

(28)

Non-Greaseable Super Strength Universal Joint

“installed as needed”

from $22.99

(34)

Universal Joint Strap Kit

“great price on line”

Popular National 1983 AMC Concord Drivetrains

National auto parts is one of the highest quality Drivetrain brands in the market. Any 1983 AMC Concord owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1983 Concord, Advance Auto Parts carries a full inventory of 3 National Drivetrains. Plus you will be keeping your AMC in peak condition while saving money because prices on these National Drivetrains range from $11.99 to $24.99, plus, with more than 47 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from $16.99

(25)

Multi-Purpose Bearing

“Smooth”

from $24.99

(20)

Wheel Bearing

“Rebuilt back axel fit great”

from $11.99

(2)

Bearing Race

“Reasonable price and woks well. front diff 2006 Escalade esv”

FAQs for 1983 AMC Concord Drivetrains

Which Drivetrains are best-sellers for 1983 AMC Concords?

Out of 133 Drivetrains that fit 1983 AMC Concords, the following parts are the top sellers:

Greaseable Premium Universal Joint (10086900) – $35.99
Taper Bearing Set (5050529) – $9.99
Universal Joint (10265714) – $15.99

What’s the price range for 1983 AMC Concord Drivetrains?

Drivetrain prices for the 1983 AMC Concord start at $2.79 and go up to $1,566.99 for the most premium parts.

What’s the average price of a Drivetrain for a 1983 AMC Concord?

The average price for Drivetrains for the 1983 AMC Concord is $170.51. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other AMC Concord model years?

Yes, we currently carry Drivetrains for 4 model years of AMC Concords between 1978 and 1982. Drivetrains are bought most frequently for the following model years: 1982, 1981, 1980, 1979, and 1978.

What are the cheapest Drivetrains for my 1983 AMC Concord?

The cheapest 1983 AMC Concord Drivetrains we carry in stock are:

Differential Crush Sleeve (20520219) – $2.79
Differential Crush Sleeve (10592883) – $2.99
Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (21260547) – $3.49
Spindle Washer – I.D. 23.0mm O.D. 38.0mm Thickness 3.6mm (Sold by each) (22148804) – $4.29
Spindle Washer – I.D. 25/32 In. O.D. 1-9/16 In. Thickness 1/8 In. (Sold by each) (22148822) – $4.29

What are the top-rated Drivetrains that fit the 1983 AMC Concord?

Out of 2,574 reviews by customers, our 1983 AMC Concord Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1983 AMC Concord and their top-rated products:

Universal Joints
- Universal Joint Strap Kit (10086955) – $22.99
- Universal Joint, Greaseable 1310 Series OSR (10855076) – $31.99
- Greaseable Super Strength Universal Joint (10086944) – $41.49
Differentials
- Universal Joint Strap Kit (10086955) – $22.99
- Universal Joint, Greaseable 1310 Series OSR (10855076) – $31.99
- Greaseable Super Strength Universal Joint (10086944) – $41.49
Spindles
- Universal Joint Strap Kit (10086955) – $22.99
- Universal Joint, Greaseable 1310 Series OSR (10855076) – $31.99
- Greaseable Super Strength Universal Joint (10086944) – $41.49

What types of Drivetrains do you sell for my 1983 AMC Concord?

As of 3/1/26, these are some of the most in-demand types of Drivetrains for a 1983 AMC Concord:

Can I get help with 1983 AMC Concord Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about AMC Drivetrains and more.

What is your return policy for AMC Concord Drivetrains?

Advance Auto Parts keeps returns simple. For new AMC Concord Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1983 AMC Concord Drivetrains

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Yukon Gear – Pinion Seal For Model 20 And Model 35 (Part No.30079)

USA Standard Gear – Steel Spool For Model 20 With 29 Spline Axles, 3.08 & Up (Part No.59020)

Yukon Gear – Carrier Installation Kit For Amc Model 35 Differential (Part No.57011)

National – Shaft Repair Sleeve (Part No.99125)

Dorman – Spindle Washer – I.D. 13/16 In. O.D. 1-21/32 In. Thickness 3/32 In. (Part No.618-013.1)

Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)

Yukon Gear – Model 35 Standard Open Pinion Gear Thrust Washer (Part No.33291)

Powertrax – Grip PRO Traction System (Part No.GT443527)

Yukon Gear – Standard Open Spider Gear Kit For Model 35 With 27 Spline Axles (Part No.16128)

Dorman – Premium Ring and Pinion Master Bearing and Installation Kit (Part No.797-104)

Yukon Gear – Model 35 Standard Open Side Gear Thrust Washer (Part No.33292)

National – Multi-Purpose Bearing (Part No.A-5)

Driveworks – Oil Seal (Part No.S-3638)

Yukon Gear – Model 35 C/Clip (Part No.33076)

Yukon Gear – Replacement Ring Gear Bolt For Model 20, Grand Cherokee 35, "Super" Dana 30 & Dana 50 – 7/16" X 20 (Part No.33040)

Yukon Gear – Long Yoke For Model 35 With A 1330 U/Joint Size (Part No.41099)

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Dorman – Differential Pinion Yoke Assembly (Part No.697-555)

Felpro – Axle Housing Cover Gasket Oval Shaped 10 Bolt Hole Gasket (Part No.RDS 13089)

Motive Gear – Differential Gear Install Kit (Part No.AM20IK)

Dorman – Spindle Washer – I.D. 13/16 In. O.D. 1-21/32 In. Thickness 3/32 In. (Sold by each) (Part No.618-013)

National – Bearing Race (Part No.M86610)

Yukon Gear – Ppinion Nut 7/8-20 Thread, 1 1/8 Socket (Part No.33146)

Yukon Gear – Standard Open Cross Pin Shaft (.750") For Ford 8", 8.8", 9" And Model 20 (Part No.33332)

Yukon Gear – Chrome Cover For Amc Model 20 (Part No.32019)

Yukon Gear – High Performance Ring & Pinion Gear Set For Model 35 In A 3.07 Ratio (Part No.24178)

Yukon Gear – Model 35 (Standard Open & Tracloc) 8.25" Chrysler Tracloc Cross Pin Bolt (Part No.33230)

Spicer – Universal Joint (Part No.5-1310X)

Driveworks – Taper Bearing Set (Part No.S-A-5)

National – Wheel Bearing (Part No.5707)

National – Multi-Purpose Bearing (Part No.A-5)

National – Shaft Repair Sleeve (Part No.99125)

Yukon Gear – Model 35 C/Clip (Part No.33076)

Yukon Gear – Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia – Knurl (Part No.33181)

Yukon Gear – Model 35 & Other Screw-Inaxle Stud, 1/2" -20 X 1.5" (Part No.33180)

Yukon Gear – Replacement Axle Stud For Dana 44 & Model 35 (Part No.33171)

Valvoline – MaxLife Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.773775)

National – Multi-Purpose Bearing (Part No.A-6)

National – Bearing Race (Part No.LM501314)

Driveworks – Taper Bearing Cone (Part No.S-LM-501349)

Motive Gear – Differential Crush Sleeve (Part No.3507575)

Motive Gear – Differential Ring and Pinion (Part No.D35-411)

Dorman – Ring and Pinion Bearing Installation Kit (Part No.697-104)

Felpro – Axle Housing Cover Gasket Oval Shaped 10 Bolt Hole Gasket (Part No.RDS 13089)

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)

Yukon Gear – Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24 (Part No.33038)

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

National – Bearing Race (Part No.M86610)

Yukon Gear – Crush Sleeve (Part No.33093)

National – Tapered Roller Bearing Cone (Part No.HM88648)

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

USA Standard Gear – Standard Spider Gear Set For Amc Model 35 With 1.560" Side Gear Bore (Part No.39030)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Motive Gear – Differential Pinion Seal (Part No.470331N)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Motive Gear – Differential Pinion Shim Kit (Part No.1112)

Yukon Gear – Model 35 Standard Open Side Gear Thrust Washer (Part No.33292)

Motive Gear – Differential Ring and Pinion (Part No.D35-373)

Yukon Gear – Trail Repair Kit For Model 35 With 1310 Size U/Joint And Straps (Part No.32287)

National – Multi Purpose Seal (Part No.7412S)

National – Bearing Race (Part No.HM88610)

Schaeffler – Bearing Cone (Part No.KLM11949)

Schaeffler – Cup (Part No.LM48510)

Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (Part No.615-072.1)

Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Part No.615-073.1)

Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Sold by each) (Part No.615-073)

Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)

Dorman – Spindle Washer – I.D. 25/32 In. O.D. 1-9/16 In. Thickness 1/8 In. (Part No.618-011.1)

Dorman – Spindle Washer – I.D. 23.0mm O.D. 38.0mm Thickness 3.6mm (Sold by each) (Part No.618-017)

Dorman – Spindle Washer – I.D. 25/32 In. O.D. 1-9/16 In. Thickness 1/8 In. (Sold by each) (Part No.618-011)

MOOG Driveline Products – Universal Joint Strap Kit (Part No.437-10)

Spicer – Universal Joint, Greaseable 1310 Series OSR (Part No.5-153X)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.369)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.269)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.280)

Driveworks – Universal Joint (Part No.DW-369)

Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)