1982 Subaru DL Brake Parts

Essential 1982 Subaru DL Brake Parts

Carquest Wearever – WHEEL CYLINDER (Part No.WCA37419)

WHEEL CYLINDER

from

$19.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA37418)

Drum Brake Wheel Cylinder

from

$18.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Carquest Premium – Brake Light Fail Switch (Part No.SBC4271)

Brake Light Fail Switch

from

$101.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Standard – Organic Brake Pads – (4-Pad Set) (Part No.NAD185)

Organic Brake Pads - (4-Pad Set)

from

$15.00
Wearever Silver brake pads are an economical choice for dependable stopping power and quiet braking.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD189)

Brake Pads: Reliable and Dependable Stopping

from

$15.00
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD291)

Brake Pads: Reliable and Dependable Stopping

from

$15.00
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD311)

Brake Pads: Reliable and Dependable Stopping

from

$24.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD112)

Brake Pads: Reliable and Dependable Stopping

from

$15.00
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5266)

Vacuum Brake Booster: Without Master Cylinder

from

$97.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5202)

Vacuum Brake Booster: Without Master Cylinder

from

$109.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5570)

Vacuum Brake Booster: Without Master Cylinder

from

$98.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5265)

Vacuum Brake Booster: Without Master Cylinder

from

$93.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2155)

Vacuum Brake Booster: Without Master Cylinder

from

$106.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Dorman – Spindle Nut Kit (Part No.05138)

Spindle Nut Kit

from

$8.99
Our Spindle Lock Nut Kit includes the nut, washer, and retainer. Each component is manufactured for high corrosion resistance and a long service life.

Product Features:
  • Direct replacement for a proper fit every time
  • High quality steel construction
  • Kit components are also available separately
  • All the hardware in Dorman’s Spindle Lock Nut Kit is constructed to strict engineering quality standards
See More

Dorman – Pik-a-Nut – Spindle Nut Kit, M24-1.5 (Part No.304938.1)

Spindle Nut Kit, M24-1.5

from

$9.49
This spindle lock nut kit includes a new spindle nut and the necessary hardware designed to match the factory equipment.

Product Features:
  • Direct replacement – this spindle lock nut kit includes a nut and related, necessary hardware for servicing specific vehicles
  • Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to wear
  • Durable construction – kit components are manufactured to precise specifications to ensure proper fit and reliable service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

1982 Subaru DL Brake Parts

You count on your 1982 Subaru DL to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 8 Brake Parts ranging in price from $8.99 to $101.99, you’re sure to find everything you need for your 1982 Subaru DL.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 5 different brands like Cardone, Dorman, and Carquest. 1982 Subaru DL Brake Parts start as low as $8.99!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 30 extensive product reviews on 1982 Subaru DL Brake Parts.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1982 Subaru DL below to get started!

Top-Rated Brake Parts Brands For Your 1982 Subaru DL

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1982 Subaru DL running right for years to come. In our inventory you’ll find brands like Cardone, Dorman, Carquest, and even more.

Popular Cardone Brake Parts

You’ll find popular Cardone brand products across Brake Master Cylinders. All are waiting to get your 1982 Subaru DL back on the road. Some of the top-rated Cardone products in these categories are:
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders

FAQs for 1982 Subaru DL Brake Parts

What are the most purchased Brake Parts for the 1982 Subaru DL?

Out of 8 Brake Parts for the 1982 Subaru DL, the most popular in our inventory are:
Spindle Nut Kit, M24-1.5
from $9.49
This product is not rated
Spindle Nut Kit, M24-1.5
Spindle Lock Nut Kits
Brake Light Fail Switch
from $101.99
This product is not rated
Brake Light Fail Switch
Brake Light Fail Switches
Brake Pads: Reliable and Dependable Stopping
from $15.00
This product is not rated
Brake Pads: Reliable and Dependable Stopping
Front Brake Pads and Shoes