1982 Pontiac J2000 Cooling and Climate Controls
More 1982 Pontiac J2000 Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 1982 Pontiac J2000, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 1982 Pontiac J2000 Cooling and Climate Controls
Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)
from
$62.99
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160°F – 210°F thread-in probe
- For use with Imperial electric fans
- Thread-in probe for installation in water jacket or radiator
Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35602)
from
$19.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Galvanized steel construction
- Meets all requirements of international standard ISO 140
- Suitable for a wide variety of applications
- Set screw installation
Carquest Premium – Temperature Sender With Gauge (Part No.WTC1049)
from
$23.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Engine Coolant Housing Cap (Part No.10232)
from
$8.79
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Heater Core (Part No.398201)
from
$96.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Product Features:
See More
Product Features:
- All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
- Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
- Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
- Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
- Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
Carquest Premium – Coolant Temperature Sensor (Part No.WTC1001)
from
$22.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
National – Bearings (Part No.S-128)
from
$11.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Factory Air – Green Round O-Ring (Part No.24650)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Carquest Premium – Engine Coolant Reservoir Cap (Part No.10236)
from
$9.49
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – AC Pressure Switch (Part No.ACA1334)
from
$32.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
- All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.
Carquest Premium – A/C Universal Accumulator / Swivel Top (Part No.T33705)
from
$54.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
Factory Air – Harness Connector (Part No.37227)
from
$25.49
OE style connectors; Molded plastic construction; Quality contacts ensure proper conductivity; Universal applications
See More
Dorman – Blower Motor Resistor (Part No.973-067)
from
$16.99
Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
- Restores performance – fixes a fan that’s only operating on one speed or not working at all
- Thoroughly tested – examined and validated to perform safely and effectively
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Carquest Premium – ABS Harness Connector (Part No.PTA1137)
from
$14.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – A/C Compressor Cut-Out Switch (Part No.ACA1264)
from
$32.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)
from
$16.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Carquest Premium – HVAC Blower Control Switch (Part No.ACA1258)
from
$10.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35970)
from
$34.49
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Contains gaskets, O-rings, or seals to properly replace the product
- Color coded for easy identification
- Zinc coated to resist corrosion
- Improved 2 terminal design replacing older 1 terminal switch
Factory Air – Sealing Washer Kit (Part No.24336)
from
$12.29
Includes O-Ring; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Dorman – Blower Motor Resistor Harness (Part No.645-709)
from
$17.99
Fan motor no longer working properly? This blower motor resistor connector is designed to replace an original equipment connector damaged by corrosion or overheating. Corrosion-resistant terminals ensure reliable performance.
Product Features:
See More
Product Features:
- Ideal replacement – this complete blower motor resistor connector assembly is a direct replacement for this vehicle application
- Damage-resistant – the connector assembly is engineered to impede corrosion and heat damage
- Complete repair solution – includes pre-assembled wiring harness/pigtail and connector terminal
- Excellent value – this part offers original equipment quality without the cost and hassle of replacing the entire wiring harness
Carquest Premium – A/C Clutch Cycle Switch (Part No.ACA1531)
from
$16.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.433785)
from
$269.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
See More
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
- Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
- OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
GM Genuine Parts – Air Conditioning Compressor Relief Valve (Part No.15-5711)
from
$67.99
GM Genuine Parts A/C Compressor Relief Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest – Multi Purpose Relay (Part No.83A1015)
from
$16.79
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- High-quality products that meet OE appearance and performance to
Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13348)
from
$7.79
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Dorman – Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (Part No.45813)
from
$1.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Help – Radiator Drain Cocks (Part No.61122)
from
$4.99
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.
Product Features:
See More
Product Features:
- Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
- Durable construction – this part is made of quality materials for a long service life
- Saves money – offers original equipment quality at a competitive price
- Quality assured – this petcock has undergone virtual testing to assure proper fit and function
Dorman – Help – Radiator Drain Cocks (Part No.61132)
from
$7.99
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.
Product Features:
See More
Product Features:
- Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
- Durable construction – this part is made of quality materials for a long service life
- Saves money – offers original equipment quality at a competitive price
- Quality assured – this petcock has undergone virtual testing to assure proper fit and function
Popular 1982 Pontiac J2000 Cooling and Climate Controls Categories
1982 Pontiac J2000 Cooling and Climate Controls
You count on your 1982 Pontiac J2000 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 107 Cooling and Climate Controls ranging in price from $1.29 to $274.99, you’re sure to find everything you need for your 1982 Pontiac J2000.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 12 different brands like Permatex, Carquest Premium, and Imperial. 1982 Pontiac J2000 Cooling and Climate Controls start as low as $1.29!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 2,654 extensive product reviews on 1982 Pontiac J2000 Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Severe Temp Automatic Adjusting Orifice Tube with 4.7 stars and Electric Fan – 12" Diameter with 3.5 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1982 Pontiac J2000 below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 1982 Pontiac J2000
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1982 Pontiac J2000 running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Imperial, and even more.
Popular Dorman – Help Cooling and Climate Controls
You’ll find popular Dorman – Help brand products across Engine Cooling Parts. All are waiting to get your 1982 Pontiac J2000 back on the road. Some of the top-rated Dorman – Help products in these categories are:
from
$5.29
(1)
Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In
Engine Coolant Reservoir Clip
Top-Rated Carquest Premium Cooling and Climate Controls
If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Cooling and Climate Controls for your 1982 Pontiac J2000, and some of our most reviewed Carquest Premium parts include:
FAQs for 1982 Pontiac J2000 Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 1982 Pontiac J2000?
Out of 107 Cooling and Climate Controls for the 1982 Pontiac J2000, the most popular in our inventory are:
from
$6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
What are the top-rated 1982 Pontiac J2000 Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 1982 Pontiac J2000 based on customer reviews/ratings are:
from
$15.99
(97)
Severe Temp Automatic Adjusting Orifice Tube
“Perfect fit in my f150. Works great.”
