1982 Pontiac Grand Prix Performance and Racing Products

Below you will find various in-demand Pontiac Performance and Racing Products, components and accessories for your 1982 Grand Prix. Advance Auto Parts has popular Grand Prix parts like Performance Engines, Performance Steering Products, Performance Fuel Systems and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Grand Prix model years including 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 and more. Select a category of 1982 Pontiac Grand Prix Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1982 Pontiac Grand Prix Performance and Racing Products Categories

Performance Carburetors

Performance Engine Coolant Thermostats

Performance Coils

Performance Exhaust Mufflers

Performance Shifters

Performance Valve Covers

Performance Water Outlets

Performance Radiator Caps

Performance Engine Cylinder Head Gaskets

Performance Differential Covers

Performance Engine Intake Manifold Gaskets

Performance Coil Spring Insulators

Performance Engine Valve Springs

Performance Chassis Bushing Kits

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Posi Units and Components

Performance Upper Performance Control Arm Bushings

Performance Engine Camshafts

Performance Ring and Pinions

Performance Ignition Parts

Performance Lower Control Arm Bushings

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Engine Push Rods

Performance Brake Hose Kits

Fuel System Upgrade Kit

Performance Transmission Rebuild Kits

Essential Performance and Racing Products for 1982 Pontiac Grand Prixes

from

$124.99

MiniSpool

from

$53.99

Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Product Features:

Indicates Coolant Temperature
Helps to Prevent Injuries from coolant or steam burns
Integrated Coolant Reclamation Valve
Improves Underhood Appearance
Fahrenheit and centigrade readings
Various valve pressures available

from

$159.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

Complete Kit: Includes Retainers And Locks
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Includes Superior Quality Steel Retainers
Includes 7 deg. Heat-Treated Valve Stem Locks
Retainers and Locks Black Oxide Coated
Non-Rotator Style: Dyno Tested and Street Proven
Great Match to Edelbrock Camshaft Kit

from

$32.49

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$541.99

HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.

Product Features:

HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.
269/273 Advertised Duration, 216/220 Duration @ .050″, .525″/.532″ Lift, 114 Lobe Separation
Use Beehive Valve Spring part No. 26915-16 with this camshaft

from

$139.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$95.99

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$32.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$511.99

A B&M transmission in a box! Transform your automatic transmission into a full-tilt B&M performer! This is our ultimate transmission kit – it comes complete with full instructions on how to assemble your transmission to B&M specifications.

Product Features:

High Perf. Friction Materials
Complete Overhaul Gasket Set
Modification Components
Replacement Valves
Replacement Springs
Drain Plug Kit Included

from

$26.99

Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.

Product Features:

Fits Oldsmobile 330, 350, 425 and 455 engines
Chrome plated
Bolts included
Designed for OEM fit
Easy to install
O-ring/gasket not included

from

$65.99

Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f

from

$173.99

As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955-85 GM small block (internally balanced) V8 engines along with 4.3L V6 engines. Also fits 1990 and earlier GM big block (internally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.

Product Features:

NHRA/IHRA Legal For All Classes
Includes SFI Certification Sticker
Ideal For Street Applications
To Extreme Duty Racing
To High RPM Use

from

$76.99

The Edelbrock #4649 Signature Series Valve Covers are designed for Chevrolet 262-400 ’59-86 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

Product Features:

Small Block Chevy 262-400 1959-86
Tall
Chrome Steel
Set Of Two
Rubber Grommets For Breather

from

$96.99

Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$76.99

The Mr. Gasket chrome plated rear end cover is made from heavy-gauge steel and comes complete with bolts and gaskets.

Product Features:

Chrome plated steel for looks
Includes bolts and gasket

from

$322.99

Product Features:

GM 10BL 8.5 R/P 3.42 FRT/REAR MGP

from

$166.99

The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.

Product Features:

Recalibrate Auto. Transmission
Optimum Performance
Select Your App. Mode
Improves Transmission Life
Trans. Removal Not Required
Downshift At Any Speed
Great For Trailer Towing
For Heavy Loads Driving Downhill

from

$843.99

Product Features:

Prepares your 1978-1988 GM G-Body with a bullet proof fuel system for conversion to EFI
Pump gas and E85 compatible Fuel Plumbing Kit in a box, ready for whatever engine you throw at it
Uses a 5 micron GM Corvette-style filter/regulator which presets the fuel pressure to a fixed 58 psi
Contains a wide variety parts and accessories going up to the engine for a complete fuel system kit
Includes 20ft of 6AN nylon braided hose, enough to go from the tank to the fuel rails
Simplifies your fuel system with direct replacement components while still maintaining an OEM-like appearance
Takes the guesswork out of piecing together fuel fittings and hose, while also upgrading the factory fuel system
Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required
Electric Fuel Pump Harness & Relay Wiring Kit, ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance
Pre-calibrated fuel level sending unit works with factory fuel gauge, for a simplistic installation, no guessing what ohm range your gauge or sending unit is
Highly detailed installation instructions to guide you, step by step, along the installation process

from

$5.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$121.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$85.99

The updated Fuel Pump Booster is an easy way to maintain the proper fuel pressure on your car after adding a power adder such as a turbo or supercharger. The new model allows you to make your boost adjustments through a PC for improved control and accuracy. The Booster ensures that the engine receives the fuel it needs to make up for the increase in air being pumped into the intake manifold. It will increase the voltage to the factory fuel pump in proportion to manifold boost pressure in order to maintain the proper fuel delivery. The amount of increase is adjustable from a range of an additional 1.5 -22 volts up to 30 psi which can all be set and adjusted from your PC with MSD’s easy to use Windows based software. The MSD Booster will wire to the factory fuel pump relay or with a secondary booster pump.

Product Features:

Direct performance replacement
For GM 2 Tower Coils Used From Mid 1980s To Late 1990s
80:1 turns ratio
Lower Primary Resistance Produces High Voltage Output
Works w/Stock Ignition As Well As MSD Ignitions
CARB E.O. Approved

from

$61.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

from

$167.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$464.99

New or reconditioned 650cfm. Square-flange. Electric choke without EGR. Primary jet 0.095. Secondary jet 0.098. Metering Rod 0.065 x 0.047. Dual plane intake. Spring loaded needles and seat increase performance. New qwik-tune adjustable secondary air valve. Distinctive black accented hardware. Lightweight ball burnished aluminum. No gaskets below fuel level to prevent leakage. Metering rod and step up springs can be changed easily. GM and AMC style throttle linkage.

Product Features:

Spring Loaded Needles/Seat Increase Performance
New Qwik-Tune Adjustable Secondary Air Valve
Distinctive Black Accented Hardware
Lightweight Ball-Burnished Aluminum
No Gaskets Below Fuel Level to Prevent Leakage
Metering Rod/Step Up Springs Can Be Changed Easily
GM/AMC-Style Throttle Linkage

from

$483.99

The Hurst Quarter Stick is designed for 2 and 3 speed applications. Its precision gate style mechanism ensures a positive feel. It features, a neutral safety switch, NHRA approved reverse lockout, and a brushed aluminum cover.

Product Features:

Forward and Reverse Shift Patterns
Chrome Plated Trigger for Detent Activity
Factory Neutral Safety Switch
Compact And Lightweight
Roller Detent with Shifter Pattern

from

$44.49

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Manufactured from high-temperature steel core/graphite faced exhaust material
Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
Conforms to and seals minor surface irregularities
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use
Anti-Stick Properties
Easy Removal For Disassembly

from

$201.99

Edelbrock part #9653 Pushrods are designed for Chevy 348/409 “W” series V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precis

Product Features:

7.2 in. Length
0.312 in. Diameter
4130 Chromoly Steel Material
Black Oxide Finish
Made In The USA

from

$405.99

Product Features:

Incredible Improvement in Control
Maintains Proper Caster and Camber Alignment
Increase in Handling and Control
Greatly Reduce Wheel Hop on Quick Acceleration
Even Braking Control is Improved
Better Suspension Stability

Upgrade your 1982 Pontiac Grand Prix with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1982 Pontiac Grand Prix, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Performance and Racing Products are key to keeping your Grand Prix functioning at its best. At Advance Auto Parts, we offer a wide selection of 74 Performance and Racing Products for the 1982 Pontiac Grand Prix, designed to meet your needs without breaking the bank. From Performance Engine replacements to Performance Steering Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1982 Pontiac Grand Prix at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $869.99, with an average price of $267.04. Our 74 Performance and Racing Products in stock come from 15 trusted brands, so you’re sure to find the right part for your 1982 Pontiac Grand Prix without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1982 Pontiac Grand Prix, we stock popular OEM and aftermarket Performance and Racing Products from top names like Holley, B & M, Accel, and more. Holley Performance and Racing Products start at just $509.99 and boast an impressive 4.2 stars average rating from customers. B & M and Accel also bring quality to the table, with Performance and Racing Products available starting at $102.99, and at an average 4.1 stars rating. With 564 customer reviews and counting, our 1982 Pontiac Grand Prix Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1982 Pontiac Grand Prix is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Prix in top shape, all in one place. Start shopping confidently below for your 1982 Pontiac Grand Prix!

Best-Selling Performance Engines for 1982 Pontiac Grand Prixes

Enhance the driving experience in your Pontiac with 12 quality Performance Engine components, starting at $9.99.

show more show less

from

$32.49

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$26.99

Fits Oldsmobile 330, 350, 425 and 455 engines
Chrome plated
Bolts included
Designed for OEM fit
Easy to install
O-ring/gasket not included

from

$32.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$61.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

High Energy 218/212 Hydraulic Roller Cam for Buick Grand National 231 V6

from

$815.99

High Energy 218/212 Hydraulic Roller Cam for Buick Grand National 231 V6

High Energy 212/212 Hydraulic Roller Cam for Buick Grand National 231 V6

from

$815.99

High Energy 212/212 Hydraulic Roller Cam for Buick Grand National 231 V6

High Energy 206/206 Hydraulic Roller Cam for Buick Grand National 231 V6

from

$815.99

High Energy 206/206 Hydraulic Roller Cam for Buick Grand National 231 V6

High Energy 218/218 Hydraulic Flat Cam for Buick 181-252 Even Fire V6

from

$479.99

High Energy 218/218 Hydraulic Flat Cam for Buick 181-252 Even Fire V6

High Energy 212/212 Hydraulic Flat Ca, for Buick Grand National 231 V6

from

$428.99

High Energy 212/212 Hydraulic Flat Ca, for Buick Grand National 231 V6

from

$57.99

Engine Valve Spring Kit

High Energy 8.684" Long, 5/16" Diameter Pushrod Set of 12

from

$31.99

High Energy 8.684" Long, 5/16" Diameter Pushrod Set of 12

from

$9.99

Engine Valve Spring

Most Popular 1982 Pontiac Grand Prix Performance Steering Products

Customize your Pontiac with 3 Performance Steering Products products like Performance Tie Rod End Boots, all priced under $6.29.

show more show less

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$6.29

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

Top Picks for 1982 Pontiac Grand Prix Performance Fuel Systems

Upgrade Pontiac Grand Prixes with top-quality Performance Fuel Systems parts, including 5 OEM and aftermarket selections for your 1982 model.

show more show less

from

$509.99

Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,

Product Features:

Vibratory Polished For Good Looks

from

$716.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$699.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$819.99

The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.

Product Features:

Gold Dichromate Finish For Extreme Off Road Environments
Single Feed Fuel Inlet For Ease Of Installation
Optimized Off-Road Calibration That Works Out-Of-The-Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
One Piece Off-Road Vent Tube Eliminates Fuel Spillover
Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
Limited Lifetime Warranty Defects In Material/Workmanship

from

$843.99

Product Features:

Prepares your 1978-1988 GM G-Body with a bullet proof fuel system for conversion to EFI
Pump gas and E85 compatible Fuel Plumbing Kit in a box, ready for whatever engine you throw at it
Uses a 5 micron GM Corvette-style filter/regulator which presets the fuel pressure to a fixed 58 psi
Contains a wide variety parts and accessories going up to the engine for a complete fuel system kit
Includes 20ft of 6AN nylon braided hose, enough to go from the tank to the fuel rails
Simplifies your fuel system with direct replacement components while still maintaining an OEM-like appearance
Takes the guesswork out of piecing together fuel fittings and hose, while also upgrading the factory fuel system
Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required
Electric Fuel Pump Harness & Relay Wiring Kit, ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance
Pre-calibrated fuel level sending unit works with factory fuel gauge, for a simplistic installation, no guessing what ohm range your gauge or sending unit is
Highly detailed installation instructions to guide you, step by step, along the installation process

In-Demand Performance Ignition Products for 1982 Pontiac Grand Prixes

Select from 4 premium Performance Ignition Products parts for your 1982 Pontiac Grand Prix, with prices ranging from $95.99 to $204.99.

show more show less

from

$102.99

Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Product Features:

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Standard Motor Products SMP Dr-31
MSD 8225

from

$95.99

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$126.99

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Similar to Standard Motor Products SMP Dr-32
Long Life And Great Looks

from

$204.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

Most Sold 1982 Pontiac Grand Prix Performance Exhaust Products

Explore our best-selling Pontiac parts for the 1982 Grand Prix among 5 OEM and aftermarket options starting from $34.99.

show more show less

from

$139.99

from

$135.99

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Flowmaster Super 40 Series Chambered Muffler

from

$189.99

Developed from our Top Ten race muffler lineup for use on the street/strip, the Super 40® features Flowmaster’s Delta Flow® technology. It’s larger case profile provides the best of both worlds of performance and sound, especially on forced induction and high horsepower vehicles. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow® technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:

Excellent performance on high horsepower vehicles
Noticeable interior resonance
Deep Aggressive Sound Exhaust Note
Durable fully welded 409SS stainless steel

from

$152.99

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$34.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

Top-Rated Performance and Racing Products Brands For Your 1982 Pontiac Grand Prix

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1982 Pontiac Grand Prixes. Below you’ll find some of our best rated Performance and Racing Products from Holley, B & M, and Accel, and more. Performance and Racing Products from these brands that fit a 1982 Grand Prix start at just $102.99 and are rated as high as 4.2 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Holley 1982 Pontiac Grand Prix Performance and Racing Products

When it comes to maintaining or upgrading your 1982 Pontiac Grand Prix, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Holley ticks all of those boxes. We offer a wide selection of Holley Performance and Racing Products, specifically designed for the 1982 Pontiac Grand Prix. With over 3 Holley brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $509.99, with an average price of just $642.32. Plus, with over 53 customer reviews and an average rating of 4.2 stars, you can trust that our Holley Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $699.99

(6)

Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny

“great carb”

from $716.99

(2)

Prem Street Carbs (Avengers)

“This was the carb that my engine builder suggested.”

from $509.99

(45)

Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny

“very easy to install…replaced older carb this one is fresh and runs smooth … needed to do minor ajustment .. but nothing anyone couldn’t do …”

Popular B & M 1982 Pontiac Grand Prix Performance and Racing Products

B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1982 Pontiac Grand Prix owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1982 Grand Prix, Advance Auto Parts carries a full inventory of 3 B & M Performance and Racing Products. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these B & M Performance and Racing Products range from $349.99 to $539.99, plus, with more than 3 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $539.99

(1)

Automatic Shifter – Megashifter – Universal

“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”

from $349.99

(1)

Automatic Shifter, StarShifter

“while I was looking this shifter over and found it wouldn’t work for my application, I found it to be as beautiful as the B&M shifter I had in my othe”

from $371.99

(1)

Automatic Shifter, Sport Shifter

“This is a sweetly made product with that hotrod look and feel.This shifter was easy to install and a knock out to drive.No down falls as far as I’m aw”

FAQs for 1982 Pontiac Grand Prix Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1982 Pontiac Grand Prixes?

Out of 74 Performance and Racing Products that fit 1982 Pontiac Grand Prixes, the following parts are the top sellers:

Tie Rod Dust Boot (17360821) – $5.99
Tie Rod Dust Boot (17360833) – $5.99
High Performance Thermostat (22903641) – $32.49

What’s the price range for 1982 Pontiac Grand Prix Performance and Racing Products?

Performance and Racing Product prices for the 1982 Pontiac Grand Prix start at $5.99 and go up to $869.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1982 Pontiac Grand Prix?

The average price for Performance and Racing Products for the 1982 Pontiac Grand Prix is $267.04. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Pontiac Grand Prix model years?

Yes, we currently carry Performance and Racing Products for 45 model years of Pontiac Grand Prixes between 1962 and 2008. Performance and Racing Products are bought most frequently for the following model years: 2008, 2007, 2006, 2005, 2004, 2003, 2002, 2001, and 2000.

What are the cheapest Performance and Racing Products for my 1982 Pontiac Grand Prix?

The cheapest 1982 Pontiac Grand Prix Performance and Racing Products we carry in stock are:

Tie Rod Dust Boot (17360821) – $5.99
Tie Rod Dust Boot (17360833) – $5.99
Tie Rod Dust Boot (22906873) – $6.29
Engine Valve Spring (50286657) – $9.99
Coil Spring Isolator Set (22908204) – $13.29

What are the top-rated Performance and Racing Products that fit the 1982 Pontiac Grand Prix?

Out of 564 reviews by customers, our 1982 Pontiac Grand Prix Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1982 Pontiac Grand Prix and their top-rated products:

Performance Shifters
- Automatic Shifter – Megashifter – Universal (6900895) – $539.99
- Automatic Shifter, Sport Shifter (17130066) – $371.99
- Automatic Shifter, StarShifter (6274609) – $349.99
Performance Radiators
- Automatic Shifter – Megashifter – Universal (6900895) – $539.99
- Automatic Shifter, Sport Shifter (17130066) – $371.99
- Automatic Shifter, StarShifter (6274609) – $349.99

What types of Performance and Racing Products do you sell for my 1982 Pontiac Grand Prix?

As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1982 Pontiac Grand Prix:

Can I get help with 1982 Pontiac Grand Prix Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Performance and Racing Products and more.

What is your return policy for Pontiac Grand Prix Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Pontiac Grand Prix Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1982 Pontiac Grand Prix Performance and Racing Products

Richmond Gear – MiniSpool (Part No.78-7526-1)

Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Competition Cams – XFI RPM 216/220 Hydraulic Roller Cam (Part No.54-414-11)

Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842548)

Mallory – Unilite Ignition Module (Part No.605)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 3 Piece Set (Part No.1200)

B & M – Transkit For 65-87 TH400 Transmission (Part No.20229)

Spectre – Water Neck; Olds (Part No.4733)

Russell – Street Legal, Monte Carlo (Part No.692100)

B & M – Flexplate, SFI 29.1 Approved, Fits 168-Tooth, 2-Piece Rear Main Seal, Chevy V8 (Part No.20230)

Edelbrock – Signature Series Valve Covers: Small Block Chevy 262-400 1959-86, Chrome Steel (Part No.4649)

Monroe – Strut-Mate Suspension Strut Mount (Part No.902968)

Mr. Gasket – Differential Cover Kit (Part No.9896)

Motive Gear – Performance Differential Ring and Pinion (Part No.G885342)

B & M – Transpak For 65-87 TH400 Transmission (Part No.20228)

Holley – G-Body Returnless Fuel System Kit (Part No.526-23)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Energy Suspension – Control Arm Bushing Set (Part No.3.3156R)

MSD Ignition – Coil; GM Coil Pack; 2 Tower Style (Part No.8224)

FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1000)

Energy Suspension – Control Arm Bushing Set (Part No.3.3132R)

Edelbrock – Thunder AVS Carburetor #1826 650 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.1826)

Hurst – Automatic Shifter, Quarter Stick Powerglide (Part No.3160001)

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5903)

Edelbrock – Pushrod Set for S/B Chevy (Part No.9653)

Energy Suspension – Hyper-Flex System (Part No.3.18110R)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Spectre – Water Neck; Olds (Part No.4733)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 3 Piece Set (Part No.1200)

FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1000)

Competition Cams – High Energy 218/212 Hydraulic Roller Cam for Buick Grand National 231 V6 (Part No.69-400-8)

Competition Cams – High Energy 212/212 Hydraulic Roller Cam for Buick Grand National 231 V6 (Part No.69-300-8)

Competition Cams – High Energy 206/206 Hydraulic Roller Cam for Buick Grand National 231 V6 (Part No.69-200-8)

Competition Cams – High Energy 218/218 Hydraulic Flat Cam for Buick 181-252 Even Fire V6 (Part No.69-246-4)

Competition Cams – High Energy 212/212 Hydraulic Flat Ca, for Buick Grand National 231 V6 (Part No.69-248-4)

Competition Cams – Engine Valve Spring Kit (Part No.980-12)

Competition Cams – High Energy 8.684" Long, 5/16" Diameter Pushrod Set of 12 (Part No.7869-12)

Competition Cams – Engine Valve Spring (Part No.980-1)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)

Holley – Prem Street Carbs (Avengers) (Part No.0-80770)

Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)

Holley – Off Road Carbs (Part No.0-90670)

Holley – G-Body Returnless Fuel System Kit (Part No.526-23)

Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)

Mallory – Unilite Ignition Module (Part No.605)

Accel – GM Hei Supercoil Red/White (Part No.140005)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842548)

Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.8042543)

Flowmaster Inc. – Flowmaster Super 40 Series Chambered Muffler (Part No.852548)

Flowmaster Inc. – Super 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.952548)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1400)