1982 Plymouth PB350 Performance and Racing Products
More 1982 Plymouth PB350 Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 1982 Plymouth PB350, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 1982 Plymouth PB350 Performance and Racing Products
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1008)
from
$41.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Remote Oil Filter Kit (Part No.7682)
from
$97.99
This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.
Product Features:
See More
Product Features:
- Relocate oil filter to an easy access location
Edelbrock – Torker II 340/360 Small Block Chrysler Intake Manifold (Part No.5076)
from
$425.99
2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response. Not for mileage or emissions applications. Can be used on 318 cid if 340/360 heads used. Available in cast or polished.
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
- Not for Mileage or Emissions Applications
- Can be Used on 318 cid if 340/360 Heads Used
Accel – Ignition/Electrical (Part No.8321)
B & M – Automatic Shifter, Unimatic Shifter (Part No.80775)
from
$269.99
The B&M Unimatic is an ideal replacement for column shift vehicles, includes neutral safety switch, 5 foot cable and a boot and plate.
Product Features:
See More
Product Features:
- Ideal As Column Shift Replacement
- Includes Neutral Safety Switch
- Includes Black T-Handle
- Backup Light Not Available
- Includes 5 ft. Cable and Hardware
- Includes Boot and Plate
Spectre – Valve Cover (Part No.5274)
from
$64.99
Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for 1965-1991 Chrysler 273-318-340-360 engines, this valve cover features chrome-plated steel construction and a smooth design. Sold in pairs, this stock profile cover is baffled to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.
Product Features:
See More
Product Features:
- Designed for 1965-1991 Chrysler 273-318-340-360 engines
- Baffled for breather system compatibility
- Sold in pairs
- Triple chrome-plated steel construction
- Stock height
- Features OEM style sealing edge
Mallory – Distributor Wiring Harness (Part No.29349)
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1432)
from
$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 6 Piece Set (Part No.1243)
from
$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Edelbrock – CARBURETOR (Part No.1812)
from
$443.99
New qwik-tune adjustable secondary air valve. Optional single or dual fuel inlet. Distinctive black accented hardware. No gaskets below fuel level to prevent leakage. Metering rod and step up springs can be changed easily. GM and AMC style throttle linkag
Product Features:
See More
Product Features:
- New Qwik-Tune Adjustable Secondary Air Valve
- Optional Single Or Dual Fuel Inlet
- Distinctive Black Accented Hardware
- No Gaskets Below Fuel Level to Prevent Leakage
- Metering Rod/Step Up Springs Can Be Changed Easily
- GM/AMC-Style Throttle Linkage
- Exclusive 12 Month Complete Satisfaction Warranty
Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)
from
$31.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with .530″ guides and 3/8″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
B & M – Flexplate, 6 Bolt Crank for TF 727 (Part No.10230)
from
$154.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1962-up TF727 transmissions and all internally balanced Chrysler, Dodge and Plymouth V8 engines with 6-bolt crankshaft flange. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.00 or 11.125 inch converter mounting locations and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.
Product Features:
See More
Product Features:
- NHRA/IHRA Legal For All Classes
- Includes SFI Certification Sticker
- Ideal For Street Applications
- To Extreme Duty Racing
- To High RPM Use
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1806)
from
$21.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Intake Manifold Bolts (Part No.6091)
from
$32.09
These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.
Product Features:
See More
Product Features:
- Features 12-point Smaller-than-standard Bolt Head
- Thick Flat Washers Distribute Optimum Clamp Load
- Ideal Use Where Space Is Minimal On Race Manifolds
- Bolts And Washers Zinc Plated For Protection
- Zinc Plated For Protection
Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam and Lifter Kit for Chrysler 273-360 (Part No.CL20-222-3)
from
$378.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Edelbrock – Sure Seat Valve Springs for Chrysler 318-340-360 V8 1957-89 (Part No.5877)
from
$59.99
Product Features:
See More
- Non-Rotator Type
- 1.394 in. Outer Diameter
- 1.010 in. Inner Diameter
- 1.010 in. Coil Blind
- Set of 16
Mr. Gasket – Header Bolts (Part No.976)
from
$22.49
When installing headers you will need header bolts, factory exhaust manifold bolts won’t work. These Mr. Gasket Header Bolts are Grade 5 for strength, black oxide coated, and have a compact hex head that is ideal for use where space is minimal – your typical header flanges. Sold as a set of 14.
Product Features:
See More
Product Features:
- 14 per Package
- Heat-Treated For Strength
- Ideal For Tight Spaces
- Grade 5 Material
- Protective Black Finish
Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3757901)
from
$538.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1608)
from
$37.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
Earls Performance Product – Solo Bleed (Part No.280021ERL)
from
$32.59Product Features:
- Prevents Air Inclusion
- Direct Replacement
- For OE Bleeders
- One Person Bleeds Safely
- Without The Mess
- No Chance Of Air Bubbles
Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-813)
from
$17.79
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.
Product Features:
See More
Product Features:
- Mechanical Fuel Pump Mounting Pad Cover For Chrysler V-8ft.S
Edelbrock – Performer RPM Series fuel pump is for Small-Block Chrysler (Part No.1720)
from
$209.99
Edelbrock part #1720 Performer RPM Series fuel pump is for Small-Block Chrysler designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high-performance’s street Fuel Pumps feature a high quality three stage
See More
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$27.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – Oil Pan Bolt Kit (Part No.6088)
from
$18.99
Oil Pan Bolt Kit
Popular 1982 Plymouth PB350 Performance and Racing Products Categories
1982 Plymouth PB350 Performance and Racing Products
You count on your 1982 Plymouth PB350 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 49 Performance and Racing Products ranging in price from $17.79 to $1,093.99, you’re sure to find everything you need for your 1982 Plymouth PB350.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 11 different brands like Mr. Gasket, Edelbrock, and FEL-PRO Performance. 1982 Plymouth PB350 Performance and Racing Products start as low as $17.79!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 432 extensive product reviews on 1982 Plymouth PB350 Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny with 3.8 stars and Intake Manifold Bolts with 4.6 stars.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1982 Plymouth PB350 below to get started!
Top-Rated Performance and Racing Products Brands For Your 1982 Plymouth PB350
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1982 Plymouth PB350 running right for years to come. In our inventory you’ll find brands like Mr. Gasket, Edelbrock, FEL-PRO Performance, and even more.
Popular Competition Cams Performance and Racing Products
You’ll find popular Competition Cams brand products across Performance Engines. All are waiting to get your 1982 Plymouth PB350 back on the road. Some of the top-rated Competition Cams products in these categories are:
Top-Rated Edelbrock Performance and Racing Products
If Edelbrock are what you’re looking for, our inventory holds plenty. We stock Edelbrock brand Performance and Racing Products for your 1982 Plymouth PB350, and some of our most reviewed Edelbrock parts include:
from
$428.99
(55)
Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
Performance Carburetors
from
$394.99
(10)
Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
Performance Carburetors
from
$397.99
(5)
Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)
Performance Carburetors
FAQs for 1982 Plymouth PB350 Performance and Racing Products
What are the most purchased Performance and Racing Products for the 1982 Plymouth PB350?
Out of 49 Performance and Racing Products for the 1982 Plymouth PB350, the most popular in our inventory are:
from
$26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
from
$27.49
This product is not rated
High Performance Thermostat
Performance Engine Coolant Thermostats
from
$36.49
This product is not rated
Lower Intake Manifold Gasket Set: 6 Piece Set
Performance Engine Intake Manifold Gaskets
What are the top-rated 1982 Plymouth PB350 Performance and Racing Products?
Top-rated Performance and Racing Products for your 1982 Plymouth PB350 based on customer reviews/ratings are:
from
$620.99
(6)
Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny
“great carb”
from
$85.29
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
