1982 Oldsmobile Omega Intake Manifold Parts
More 1982 Oldsmobile Omega Intake Manifold Parts
Find your specific 1982 Oldsmobile Omega original or aftermarket Intake Manifold Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1982 Oldsmobile Omega Intake Manifold Parts
Edelbrock – Performer RPM AIR-Gap Small Block Chevy Black Intake Manifold (Part No.75013)
from
$525.99
Edelbrock part #75013 RPM Air-Gap RPM intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8’s. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that’s used on our Victor Series competition intakes.
Product Features:
See More
Product Features:
- 1500-6500 RPM Range
- Dual Plane Type-4150 Style Flange
- 4.2 in. Front Height, 4.72 in. Center Height, 5.25 in. Rear Height
- Black Powder Coated Finish
- Non-EGR
Edelbrock – Small Block Chevy Street Tunnel Ram Polished (Part No.71101)
from
$1268.99
For 3500 to 7500 PRM. Use where low-end torque is not a prime factor. Great for engines with slightly modified heads. HEI ignition will not clear manifold. Street machines, street rods, pro-street and marine.
Product Features:
See More
Product Features:
- Street Tunnel Ram; Intake Manifold Top
Edelbrock – Performer RPM Small Block Chevy Black Intake Manifold (Part No.71013)
from
$438.99
Edelbrock part #71013 Performer RPM intake manifold is designed for 1955-86 262-400 c.i.d. Chevy V8’s, for maximum power and a broad torque curve for high- Performance’street/marine engines. Provides power like a single-plane and throttle response like a
Product Features:
See More
Product Features:
- 1500-6500 RPM Range
- Dual Plane Type-4150 Style Flange
- 4.2 in. Front Height, 4.72 in. Center Height, 5.25 in. Rear Height
- Black Powder Coated Finish
- Non-EGR
Holley – Strip Dominator; Intake Manifold (Part No.300-25)
from
$343.99
Strip Dominator intake manifold square bore carburetor mounting flange. Single plane with isolated plenum. Isolated water cross-over.
Product Features:
See More
Product Features:
- Single Plane With Isolated Plenum
- Square Bore Carburetor Mounting Flange
- Isolated Water Cross-Over
- Power Band 4500-7600 rpm
- Height Front 5.11 in. Rear 5.97 in.
- Port Size 2.05 in. Height 1.22 in. Width
- No Exhaust Heat Crossover Provision
- Ideal For Drag Cars w/Auto Trans.
Edelbrock – Performer EPS Manifold w/Oil Fill Tube for Small-Block Chevy, Black Finish (Part No.27033)
from
$445.99
Edelbrock part #27033 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thr
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
- Black Powder Coated Finish
- Non-EGR W/ Oil Fill Tube
Edelbrock – Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy (Part No.2601)
from
$376.99Product Features:
- Based on Performer Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg .Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- Fits Both Spread and Square Bore Carburetors
- Also in Polished/PermaStar/EnduraShine Finish
Edelbrock – Pro-Flo XT Small Block Chevy EFI Intake Manifold (Part No.7137)
from
$606.99
Edelbrock part #7137 Pro-Flo XT intake manifold is designed for 1957-86 S/B Chevy. This manifold is engineered with a large plenum and long tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range (1500-7000 rpm). This
Product Features:
See More
Product Features:
- 1500-7000 RPM Range
- Single Plane Type-Throttle Body XT Style Flange
- 9 in. Front Height, 9 in. Center Height, 8.2 in. Rear Height
- Satin Finish
- Made In The USA
Edelbrock – Pro-Flo XT Small Block Chevy EFI Black Intake Manifold (Part No.71373)
from
$711.99
Edelbrock part #71373 Pro-Flo XT intake manifold is designed for 1957-86 small-block Chevy V8 applications. The Pro-Flo XT intakes are engineered with a large plenum and long tapered runners to deliver maximum horsepower and broad torque throughout the rp
Product Features:
See More
Product Features:
- 1500-7000 RPM Range
- Single Plane Type-Throttle Body XT Style Flange
- 9 in. Front Height, 9 in. Center Height, 8.2 in. Rear Height
- Black Powder Coated Finish
- Made In The USA
Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Black Finish (Part No.27013)
from
$360.99
Edelbrock part #27013 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thr
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
- Black Powder Coated Finish
- Non-EGR
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90314-2)
from
$29.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Mr. Gasket – Gskt Intake (Part No.5812)
from
$51.99
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Silicone beading on both sides of each gasket
- Complete with manifold end seals and distributor gasket
- For OE replacement, high performance street, drag race and oval track use
- Creates Tight Leak proof Seal
Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5820)
from
$34.99
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Silicone beading on both sides of each gasket
- Complete with manifold end seals and distributor gasket
- For OE replacement, high performance street, drag race and oval track use
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 91022)
from
$30.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Sealed Power – Valley Pan Gasket Set (Part No.260-4001)
from
$22.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Edelbrock – Intake Manifold replacement base to top gasket (Part No.6999)
from
$17.99
Replacement gasket for top to bottom. See PN(7110) complete. PN(7067) bottom. PN(7032) top. Includes base and top for intake manifold PN(7110).
Product Features:
See More
Product Features:
- Replacement Gasket for Top to Bottom
- See PN[7110]Complete; PN[7067]Bottom; PN[7032] Top
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90563)
from
$11.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Valley Pan Gasket Set (Part No.MS 96033)
from
$42.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
NTK – Air Charge Temperature Sensor (Part No.EF0008)
from
$25.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- Air Charge Temperature Sensors are designed to meet or exceed OE specifications in form, fit and function to ensure proper monitoring of air temperature entering the engine
- NTK’s Engine Coolant Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper engine operating temperature.
- Engine Coolant Temperature (ECT) Sensors measure the temperature of the coolant. The readings from the (ECT) sensor are sent back to the Engine Control Unit (ECU) to adjust the fuel injection and ignition timing.
Popular 1982 Oldsmobile Omega Intake Manifold Parts Categories
1982 Oldsmobile Omega Intake Manifold Parts
Maybe you’re in the middle of a full rebuild of that 1982 Oldsmobile Omega. Maybe you just need a couple of Intake Manifold Parts. Either way, Advance Auto Parts has 4 different Intake Manifold Parts in our inventory ranging from $11.29 to $205.99. That means you can find the exact parts or products you need to keep that 1982 Oldsmobile Omega running smoothly.
Intake Manifold Parts are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1982 Oldsmobile Omega. NTK, Felpro, and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Intake Manifold Parts for your 1982 Oldsmobile Omega, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Intake Manifold Parts to keep your 1982 Oldsmobile Omega rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Intake Manifold Parts Brands To Make Your 1982 Oldsmobile Omega Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1982 Oldsmobile Omega demands trusted brand parts and products to keep it running. Many trusted brands of Intake Manifold Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Omega the best it can be. Be sure to browse some of our top Intake Manifold Parts brands and parts.
FAQs for 1982 Oldsmobile Omega Intake Manifold Parts
What are the most purchased Intake Manifold Parts for the 1982 Oldsmobile Omega?
Out of 4 Intake Manifold Parts for the 1982 Oldsmobile Omega, the most popular in our inventory are:
from
$25.99
This product is not rated
Air Charge Temperature Sensor
Intake Manifold Temperature Sensors
