1978 Oldsmobile Omega Intake Manifold Parts

Essential 1978 Oldsmobile Omega Intake Manifold Parts

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90563)

Engine Intake Manifold Gasket Set

from

$11.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Mr. Gasket – Gskt Intake (Part No.5812)

Gskt Intake

from

$51.99
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Silicone beading on both sides of each gasket
  • Complete with manifold end seals and distributor gasket
  • For OE replacement, high performance street, drag race and oval track use
  • Creates Tight Leak proof Seal
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90314-2)

Engine Intake Manifold Gasket Set

from

$29.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Valley Pan Gasket Set (Part No.MS 96033)

Valley Pan Gasket Set

from

$42.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Sealed Power – Valley Pan Gasket Set (Part No.260-4001)

Valley Pan Gasket Set

from

$22.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Edelbrock – Intake Manifold replacement base to top gasket (Part No.6999)

Intake Manifold replacement base to top gasket

from

$17.99
Replacement gasket for top to bottom. See PN(7110) complete. PN(7067) bottom. PN(7032) top. Includes base and top for intake manifold PN(7110).

Product Features:
  • Replacement Gasket for Top to Bottom
  • See PN[7110]Complete; PN[7067]Bottom; PN[7032] Top
See More

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5820)

Ultra Seal: Intake Gasket

from

$34.99
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Silicone beading on both sides of each gasket
  • Complete with manifold end seals and distributor gasket
  • For OE replacement, high performance street, drag race and oval track use
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 91022)

Engine Intake Manifold Gasket Set

from

$30.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Spectre – Bolt Kit Intake Hex Head (Part No.4652)

Bolt Kit Intake Hex Head

from

$9.99
Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.

Product Features:
  • Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
  • 3/8 inch-16 by 1 inch bolts
  • Kit includes 12 bolts and washers
  • Manufactured from high quality steel
  • Bolts feature hex heads
See More

Mr. Gasket – Intake Manifold Bolts (Part No.955G)

Intake Manifold Bolts

from

$15.49
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Product Features:
  • Grade 5 socket head bolts are zinc plated for protection and appearance
  • Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
  • Washers Included
See More

ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", Hex Style Head Type, Polished, Ss (Part No.434-2001)

For Use With Chevy 265/ 400 Cubic", Hex Style Head Type, Polished, Ss

from

$46.49
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Would not Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
  • 1″ Long
See More

Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

from

$17.49
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Product Features:
  • Zinc plated to resist corrosion and provide a clean professional appearance
  • Made from Grade 5 steel for strength and durability
  • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
  • Allen (socket) Head
  • Zinc Plated For Protection
See More

ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers (Part No.434-2101)

For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers

from

$46.49
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Would not Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
See More

Edelbrock – Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy (Part No.2703)

Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy

from

$322.99
Edelbrock part #2703 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thro

Product Features:
  • Idle-5500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
  • Satin Finish
  • Non-EGR W/ Oil Fill Tube
See More

Edelbrock – Small Block Chevy Street Tunnel Ram Polished (Part No.71101)

Small Block Chevy Street Tunnel Ram Polished

from

$1268.99
For 3500 to 7500 PRM. Use where low-end torque is not a prime factor. Great for engines with slightly modified heads. HEI ignition will not clear manifold. Street machines, street rods, pro-street and marine.

Product Features:
  • Street Tunnel Ram; Intake Manifold Top
See More

Edelbrock – Performer RPM AIR-Gap Small Block Chevy Polished Intake Manifold (Part No.75011)

Performer RPM AIR-Gap Small Block Chevy Polished Intake Manifold

from

$713.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.

Product Features:
  • Polished Version Of Edelbrock PN[7501]
  • Polish is Hand-Buffed for Brilliant Shine
  • Based on Performer RPM-Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • Designed for 1500 to 6500 RPM Street-Driven Power
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Larger Plenum and Runners Maximizes Other Upgrades
See More

Edelbrock – Performer EPS Manifold w/Oil Fill Tube for Small-Block Chevy, Black Finish (Part No.27033)

Performer EPS Manifold w/Oil Fill Tube for Small-Block Chevy, Black Finish

from

$445.99
Edelbrock part #27033 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thr

Product Features:
  • Idle-5500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
  • Black Powder Coated Finish
  • Non-EGR W/ Oil Fill Tube
See More

Weiand – Stealth; Intake Manifold (Part No.8150P)

Stealth; Intake Manifold

from

$371.99


Product Features:
  • High Rise/Dual Plane Design For Maximum Torque
  • Fully CNC Machined For A Perfect Fit
  • Square Bore Carburetor Flange
  • Exhaust Crossover For Improved Street Drivability
  • Permanent Mold Casting Process
  • Lighter/Smoother/Better Looking
  • More Consistent Castings
See More

Edelbrock – Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish (Part No.2101)

Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish

from

$257.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Accepts Late-Model Choke; Waterneck; and HEI
  • Accepts A/C And Alternator
  • Accepts Exhaust Heated Chokes
See More

Edelbrock – Performer RPM Small Block Chevy AIR-Gap Intake Manifold (Part No.7501)

Performer RPM Small Block Chevy AIR-Gap Intake Manifold

from

$356.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.

Product Features:
  • Based on Performer RPM-Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • Designed for 1500 to 6500 RPM Street-Driven Power
  • Dual-Plane High-Rise Intake
  • For Square Bore Carburetors Only
See More

Edelbrock – Torker II Intake Manifold Small-Block Chevy (Part No.5001)

Torker II Intake Manifold Small-Block Chevy

from

$267.99
2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response. Not for mileage or emissions applications. For trucks or vans use PN(2701) instead. Not for LT1 or Chevy bowtie heads. Not for 1987 and later stock aluminum heads. Available in cast or polished.

Product Features:
  • 2500 to 6500 RPM High Performance Street Engines
  • Single-Plane Low-Rise Intake Good for High RPM
  • Ideal for Applications with Limited Hood Clearance
  • For Top-End HP and Adequate Throttle Response
  • Not for Mileage or Emissions Applications
  • For Trucks or Vans Use PN[2701] Instead
  • Not for LT1 or Chevy Bowtie Heads
  • Not for 1987 and Later Stock Aluminum Heads
See More

Edelbrock – Pro-Flo XT Small Block Chevy EFI Intake Manifold (Part No.7137)

Pro-Flo XT Small Block Chevy EFI Intake Manifold

from

$606.99
Edelbrock part #7137 Pro-Flo XT intake manifold is designed for 1957-86 S/B Chevy. This manifold is engineered with a large plenum and long tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range (1500-7000 rpm). This

Product Features:
  • 1500-7000 RPM Range
  • Single Plane Type-Throttle Body XT Style Flange
  • 9 in. Front Height, 9 in. Center Height, 8.2 in. Rear Height
  • Satin Finish
  • Made In The USA
See More

Edelbrock – Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish (Part No.26011)

Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish

from

$674.99


Product Features:
  • Based on Performer Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • Polished Finish Produces Brilliant Shine
  • Ideal for Street Rods and Street Machines
See More

Edelbrock – Performer Top Small-Block Chevy 4V Intake Manifold (Part No.3789)

Performer Top Small-Block Chevy 4V Intake Manifold

from

$205.99
Product Features:
  • Matching Top For Edelbrock Base Intake PN[3785]
  • Designed for Standard Flange 4-barrel Carburetor
  • Contains Necessary Linkage And Bracketry
  • Match With Edelbrock Valve Covers Pn[4488]
See More

Edelbrock – Performer RPM Small Block Chevy Intake Manifold (Part No.7101)

Performer RPM Small Block Chevy Intake Manifold

from

$281.99


Product Features:
  • Best for the Ultimate in Street High-Performance
  • Designed for 1500 to 6550 RPM Street-Driven Power
  • Dual-Plane High-Rise Intake w/180 deg Firing Order
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Larger Plenum and Runners Maximizes Other Upgrades
  • Edelbrock Total Power Package Maximizes Gains
  • Also in Polished/PermaStar/EnduraShine Finish
See More

Edelbrock – Pro-Flo XT Small Block Chevy EFI Black Intake Manifold (Part No.71373)

Pro-Flo XT Small Block Chevy EFI Black Intake Manifold

from

$711.99
Edelbrock part #71373 Pro-Flo XT intake manifold is designed for 1957-86 small-block Chevy V8 applications. The Pro-Flo XT intakes are engineered with a large plenum and long tapered runners to deliver maximum horsepower and broad torque throughout the rp

Product Features:
  • 1500-7000 RPM Range
  • Single Plane Type-Throttle Body XT Style Flange
  • 9 in. Front Height, 9 in. Center Height, 8.2 in. Rear Height
  • Black Powder Coated Finish
  • Made In The USA
See More

Edelbrock – Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy (Part No.2601)

Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy

from

$376.99


Product Features:
  • Based on Performer Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg .Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • Fits Both Spread and Square Bore Carburetors
  • Also in Polished/PermaStar/EnduraShine Finish
See More

Edelbrock – Performer Intake Manifold Small-Block Chevy (Part No.3706)

Performer Intake Manifold Small-Block Chevy

from

$381.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Accepts Late-Model Choke; Waterneck; and HEI
  • Accepts A/C And Alternator
  • Accepts Exhaust Heated Chokes and Accepts EGR
See More

1978 Oldsmobile Omega Intake Manifold Parts

Maybe you’re in the middle of a full rebuild of that 1978 Oldsmobile Omega. Maybe you just need a couple of Intake Manifold Parts. Either way, Advance Auto Parts has 29 different Intake Manifold Parts in our inventory ranging from $9.99 to $1,268.99. That means you can find the exact parts or products you need to keep that 1978 Oldsmobile Omega running smoothly.

Intake Manifold Parts are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1978 Oldsmobile Omega. Felpro, Mr. Gasket, and Spectre are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Intake Manifold Parts for your 1978 Oldsmobile Omega, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Intake Manifold Parts to keep your 1978 Oldsmobile Omega rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Intake Manifold Parts Brands To Make Your 1978 Oldsmobile Omega Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1978 Oldsmobile Omega demands trusted brand parts and products to keep it running. Many trusted brands of Intake Manifold Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Omega the best it can be. Be sure to browse some of our top Intake Manifold Parts brands and parts.

Top 1978 Oldsmobile Omega Intake Manifold Parts from Felpro

Felpro products are another trusted brand when it comes to Intake Manifold Parts for your 1978 Oldsmobile Omega. Popular Felpro parts include:
Engine Intake Manifold Gasket Set
from $29.99
(46)
Engine Intake Manifold Gasket Set
Intake Manifold Gasket Sets

FAQs for 1978 Oldsmobile Omega Intake Manifold Parts

What are the most purchased Intake Manifold Parts for the 1978 Oldsmobile Omega?

Out of 29 Intake Manifold Parts for the 1978 Oldsmobile Omega, the most popular in our inventory are:
Intake Manifold Bolts
from $15.49
(12)
Intake Manifold Bolts
Intake Manifold Bolt Sets
Bolt Kit Intake Hex Head
from $9.99
This product is not rated
Bolt Kit Intake Hex Head
Intake Manifold Bolt Sets
Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers
from $17.49
This product is not rated
Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers
Intake Manifold Bolt Sets