1982 Mazda B2000 Cooling and Climate Controls
Find Your Specific 1982 Mazda B2000 Cooling and Climate Controls
Below you will find various in-demand Mazda Cooling and Climate Controls, components and accessories for your 1982 B2000. Advance Auto Parts has popular B2000 parts like Blower Motor and Related Products, Engine Cooling Parts, Air Conditioning Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other B2000 model years including
1979,
1980,
1981,
1983,
1984,
1986,
1987 and more. Select a category of 1982 Mazda B2000 Cooling and Climate Controls below and start saving instantly.
Popular 1982 Mazda B2000 Cooling and Climate Controls Categories
Essential Cooling and Climate Controls for 1982 Mazda B2000s
Carquest Premium – Engine Coolant Temperature Sending Unit Switch Connector (Part No.PTA1217)
from
$5.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Designed for the OE distributor as a direct replacement part
Carquest Premium – Oil Temp Sender (Part No.WTC1212)
from
$17.99
Carquest Coolant Temperature Sensors provide accurate data to the PCM to ensure proper management of your vehicle’s fuel injection system, ignition and variable valve timing, transmission shifting, and more. Manufactured using the highest quality OEM approved materials for increased durability in even the most extreme temperatures. All Carquest Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Dorman – Help – Radiator Drain Cock (Part No.61112)
from
$3.99
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.
Product Features:
See More
Product Features:
- Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
- Durable construction – this part is made of quality materials for a long service life
- Saves money – offers original equipment quality at a competitive price
- Quality assured – this petcock has undergone virtual testing to assure proper fit and function
Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)
from
$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Carquest Premium – Universal Fan Clutch – 5" Thermal Import/Compact (Part No.215096)
from
$76.99
Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. The fan clutch is the component of the cooling system that varies the fan speed to meet the cooling needs of the engine. The fan clutch provides high airflow volume and, by only operating the fan as needed, promotes good fuel economy. CARQUEST fan clutches are designed to meet OE performance specifications.
Product Features:
See More
Product Features:
- CARQUEST Premium Fan Clutch
- 5″ thermal import/compact
- Designed, tested and built by application
- OE performance, fit and appearance
Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 90 Degree Neck Angle (Part No.902-5050)
from
$10.99
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
Carquest Premium – A/C TXV O-Ring Expansion Valve (Part No.T38872)
from
$22.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
- Precision machined ports
Carquest Premium – Radiator Cap: 13 PSI (Part No.10229)
from
$9.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Standard Thermostat: 192 Degrees (Part No.13869)
from
$10.49
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Imperial – Adjustable Thermostatic Fan Control (Part No.226203)
from
$22.99
Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans
Product Features:
See More
Product Features:
- Economy adjustable thermostatic fan control
- Economy Model; 32-248°F
- For use with Imperial electric fans
- Probe installs into radiator fins
National – Bearings (Part No.5001-KFF)
from
$33.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T4085)
from
$53.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- 100% tested for reliable performance
- Durable housing features precisely machined mounting surface for proper sealing and fitment
- Equipped with weep chamber or similar feature to help prevent unnecessary replacement
- Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
- All gaskets or seals necessary for water pump are included
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
- This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
- This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26754)
from
$18.79
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- Application specific
- SUV and rear air applications
Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)
from
$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.
Product Features:
See More
Product Features:
- Sensor-safe, noncorrosive RTV silicone gasket material
- Formulated specifically for water pumps and thermostat housings
- Highest water-glycol resistance available in RTV silicone
- Superior adhesion and flexibility
- Can be used as a gasket maker or dressing
Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)
from
$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Flex A Lite – Trimline Straight Blade Electric Fan (Part No.112)
from
$112.99
Trimline Straight Blade Electric Fan
Factory Air – Green Round O-Ring (Part No.24650)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)
from
$16.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Factory Air – Green Round O-Ring (Part No.24608)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1418)
from
$18.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.
Product Features:
See More
Product Features:
- Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
- Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Dorman – Blower Motor Resistor (Part No.973-092)
from
$44.49
Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
- Restores performance – fixes a fan that’s only operating on one speed or not working at all.
- Thoroughly tested – examined and validated to perform safely and effectively
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Ishino – Water Pipe O-Ring (Part No.G2026244351ISH)
from
$1.71
Water Pipe O-Ring
Carquest Premium – A/C Filter Drier (Part No.T33318)
from
$22.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
Carquest Premium – A/C Filter Drier (Part No.T33485)
from
$20.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
Carquest Premium – A/C Filter Drier (Part No.T33428)
from
$19.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)
from
$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
Upgrade your 1982 Mazda B2000 with Top-Quality Cooling and Climate Controls
When it comes to maintaining or upgrading your 1982 Mazda B2000, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mazda or enhancing its overall performance, Cooling and Climate Controls are key to keeping your B2000 functioning at its best. At Advance Auto Parts, we offer a wide selection of 40 Cooling and Climate Controls for the 1982 Mazda B2000, designed to meet your needs without breaking the bank.
From
Blower Motor and Related Product
replacements to
Engine Cooling Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 1982 Mazda B2000 at great prices.
Our Cooling and Climate Controls inventory for this model
ranges from just $0.99 to $112.99, with
an average price of $31.77.
Our 40 Cooling and Climate Controls in stock come from 13 trusted brands, so you’re sure to find the right part for your 1982 Mazda B2000 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1982 Mazda B2000, we stock popular OEM and aftermarket Cooling and Climate Controls from top names
like Permatex, Carquest Premium, Imperial, and more.
Permatex Cooling and Climate Controls
start at just $6.99 and boast an impressive 5 stars average rating from customers.
Carquest Premium and Imperial also bring quality to the table, with Cooling and Climate Controls available starting at $5.29, and at an average 4 stars rating.
With 547 customer reviews and counting, our 1982 Mazda B2000 Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1982 Mazda B2000 is always ready to roll. We’re committed to providing you with everything you need to keep your B2000 in top shape, all in one place.
Start shopping confidently below for your 1982 Mazda B2000!
Best-Selling Blower Motor and Related Products for 1982 Mazda B2000s
Enhance the driving experience in your Mazda with 1 quality Blower Motor and Related Product components, starting at $18.99.
Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1418)
from
$18.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.
Product Features:
See More
Product Features:
- Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
- Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Most Popular 1982 Mazda B2000 Engine Cooling Parts
Customize your Mazda with 31 Engine Cooling Parts products
like Thermostats,
Water Pumps, and
Radiator Caps, all
priced under $112.99.
Carquest Premium – Radiator Cap: 13 PSI (Part No.10329)
from
$10.49
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Safety lever to vent coolant pressure before removal
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Imperial – Adjustable Thermostatic Fan Control (Part No.226203)
from
$22.99
Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans
Product Features:
See More
Product Features:
- Economy adjustable thermostatic fan control
- Economy Model; 32-248°F
- For use with Imperial electric fans
- Probe installs into radiator fins
Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)
from
$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13868)
from
$10.49
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)
from
$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.
Product Features:
See More
Product Features:
- Sensor-safe, noncorrosive RTV silicone gasket material
- Formulated specifically for water pumps and thermostat housings
- Highest water-glycol resistance available in RTV silicone
- Superior adhesion and flexibility
- Can be used as a gasket maker or dressing
Carquest Premium – Radiator Cap: 13 PSI (Part No.10229)
from
$9.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Standard Thermostat: 192 Degrees (Part No.13869)
from
$10.49
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Imperial – Electric Fan – 12" Diameter (Part No.226112)
from
$94.99
Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.
Product Features:
See More
Product Features:
- Rapid-Cool® Thin-Line electric fans
- 12″ Diameter
- 800 CFM
- Use as a pusher or puller fan
Imperial – Adjustable Thermostatic Fan Control (Part No.226204)
from
$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160-210°F push-in probe
- For use with Imperial electric fans
- Probe installs into radiator fins
Imperial – Electric Fan – 10" Diameter (Part No.226110)
from
$67.99
Electric fan with 10″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.
Product Features:
See More
Product Features:
- Rapid-Cool® Thin-Line electric fans
- 10″ Diameter
- 650 CFM
- Use as a pusher or puller fan
Imperial – Thermostatic Fan Control – Preset (Part No.226206)
from
$38.49
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Preset thermostatic fan control
- 185°F preset
- For use with Imperial electric fans
- Probe installs into radiator fins
Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)
from
$62.99
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160°F – 210°F thread-in probe
- For use with Imperial electric fans
- Thread-in probe for installation in water jacket or radiator
Motorad UltraStats – Thermostat: 180 Degrees (Part No.5240-180)
from
$14.29
This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.
Product Features:
See More
Product Features:
- Heavy gauge stainless steel components offer increased reliability and long-lasting durability
- Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
- Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
- AccuSpring Design for stable temperature control and increased cabin comfort
Beck/Arnley – Thermostat (Part No.143-0687)
from
$17.79
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Features a standard jiggle valve where required by OE and has a long stroke for maximum cooling
- Constructed with premium materials for durability
- Be sure to use the proper coolant to maximize cooling system components. See Beck/Arnley catalog for the coolant for this application.
- Application specific for this vehicle
Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)
from
$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Beck/Arnley – Thermostat (Part No.143-0688)
from
$16.79
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Features a standard jiggle valve where required by OE and has a long stroke for maximum cooling
- Constructed with premium materials for durability
- Be sure to use the proper coolant to maximize cooling system components. See Beck/Arnley catalog for the coolant for this application.
- Application specific for this vehicle
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$47.19
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Mr. Gasket – Thermocap Radiator Cap (Part No.2470R)
from
$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Carquest Premium – Universal Fan Clutch – 5" Thermal Import/Compact (Part No.215096)
from
$76.99
Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. The fan clutch is the component of the cooling system that varies the fan speed to meet the cooling needs of the engine. The fan clutch provides high airflow volume and, by only operating the fan as needed, promotes good fuel economy. CARQUEST fan clutches are designed to meet OE performance specifications.
Product Features:
See More
Product Features:
- CARQUEST Premium Fan Clutch
- 5″ thermal import/compact
- Designed, tested and built by application
- OE performance, fit and appearance
Beck/Arnley – Thermostat (Part No.143-0689)
from
$14.79
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Features a standard jiggle valve where required by OE and has a long stroke for maximum cooling
- Constructed with premium materials for durability
- Be sure to use the proper coolant to maximize cooling system components. See Beck/Arnley catalog for the coolant for this application.
- Application specific for this vehicle
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T4085)
from
$53.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- 100% tested for reliable performance
- Durable housing features precisely machined mounting surface for proper sealing and fitment
- Equipped with weep chamber or similar feature to help prevent unnecessary replacement
- Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
- All gaskets or seals necessary for water pump are included
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
- This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
- This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
Flex A Lite – Trimline Straight Blade Electric Fan (Part No.112)
from
$112.99
Trimline Straight Blade Electric Fan
GMB – GMB Water Pump (Part No.G3000320863GMB)
from
$97.64
The GMB Water Pump contains no remanufactured components and is designed to combat engine overheating associated with higher RPM, performance and high load applications. All GMB Water Pumps feature a precision ground, heavy duty steel bearing that`s completely sealed and lubricated for life. A specially modified, high performance impeller eliminates cavitation at high RPM`s, maintaining maximum volumetric flow of coolant, thus reducing engine temperature and increasing horsepower.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application.
- 100% new with no remanufactured parts.
- High flow design
- Factory lubricated bearing assembly
- Precision ground shaft and hub
- OE quality forged housing for maximum coolant flow
- Precision built and balanced
- Pressed on impeller for increased water flow
- Unique no sealed required gasket
- Unitized seal protects bearings and provides long life leak free performance.
- Factory sealed precision ground one piece bearing assembly
Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)
from
$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)
from
$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
Kuzeh – Thermostat (Part No.G400028636KUZ)
from
$27.80
Kuzeh offers a full line of thermostats to replace your original equipment thermostat. This includes a wide variety of temperature ranges all designed to operate within OEM specifications.
Product Features:
See More
Product Features:
- Strict quality control, and functional testing
- Self-cleaning and self-aligning thermostat valve
- Original equipment design provides exact fit and performance
- Precise sealing edges reduce leakage and premature cooling
- Temperature sensitive heat motor provides consistent valve response for smooth performance and precise engine cooling
- Stainless steel assembly and springs are engineered for long life
Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 90 Degree Neck Angle (Part No.902-5050)
from
$10.99
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
Carquest Premium – Engine Coolant Temperature Sender (Part No.WTA1385)
from
$10.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Help – Radiator Drain Cocks (Part No.61110)
from
$5.99
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.
Product Features:
See More
Product Features:
- Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
- Durable construction – this part is made of quality materials for a long service life
- Saves money – offers original equipment quality at a competitive price
- Quality assured – this petcock has undergone virtual testing to assure proper fit and function
Carquest Premium – Engine Coolant Temperature Sending Unit Switch Connector (Part No.PTA1217)
from
$5.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Designed for the OE distributor as a direct replacement part
Ishino – Water Pipe O-Ring (Part No.G2026244351ISH)
from
$1.71
Water Pipe O-Ring
Top Picks for 1982 Mazda B2000 Air Conditioning Parts
Upgrade Mazda B2000s with top-quality Air Conditioning Parts parts, including 8 OEM and aftermarket selections for your 1982 model.
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)
from
$16.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Factory Air – Green Round O-Ring (Part No.24650)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Factory Air – Green Round O-Ring (Part No.24608)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Factory Air – Green Round O-Ring (Part No.24610)
from
$0.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26754)
from
$18.79
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- Application specific
- SUV and rear air applications
Carquest Premium – A/C TXV Type O-Ring Expansion Valve (Part No.T38608)
from
$23.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
National – Bearings (Part No.5001-KFF)
from
$33.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Carquest Premium – A/C Filter Drier (Part No.T33318)
from
$22.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
Top-Rated Cooling and Climate Controls Brands For Your 1982 Mazda B2000
Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 1982 Mazda B2000s. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Carquest Premium, and Imperial, and more. Cooling and Climate Controls from these brands that fit a 1982 B2000 start at just $5.29 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.
Popular Permatex 1982 Mazda B2000 Cooling and Climate Controls
When it comes to maintaining or upgrading your 1982 Mazda B2000, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 1982 Mazda B2000. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$26.99
$26.99
(7)
High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
“it worked great,thank you marv and your crew.”
Popular Carquest Premium 1982 Mazda B2000 Cooling and Climate Controls
Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 1982 Mazda B2000 owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1982 B2000, Advance Auto Parts carries a full inventory of 13 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Mazda in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $5.29 to $94.99, plus, with more than 116 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.
FAQs for 1982 Mazda B2000 Cooling and Climate Controls
Which Cooling and Climate Controls are best-sellers for 1982 Mazda B2000s?
Out of 40 Cooling and Climate Controls that fit 1982 Mazda B2000s, the following parts are the top sellers:
- Adjustable Thermostatic Fan Control (6016936) – $22.99
- Electric Fan – 12" Diameter (6016901) – $94.99
- Adjustable Thermostatic Fan Control (3670006) – $55.99
What’s the price range for 1982 Mazda B2000 Cooling and Climate Controls?
Cooling and Climate Control prices for the 1982 Mazda B2000 start at $0.99 and go up to $112.99 for the most premium parts.
What’s the average price of a Cooling and Climate Control for a 1982 Mazda B2000?
The average price for Cooling and Climate Controls for the 1982 Mazda B2000 is $31.77. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Cooling and Climate Controls for other Mazda B2000 model years?
What are the cheapest Cooling and Climate Controls for my 1982 Mazda B2000?
The cheapest 1982 Mazda B2000 Cooling and Climate Controls we carry in stock are:
- Green Round O-Ring (18890254) – $0.99
- Water Pipe O-Ring (10792473) – $1.71
- Green Round O-Ring (18890169) – $1.99
- Green Round O-Ring (18890841) – $1.99
- Engine Coolant Temperature Sending Unit Switch Connector (12510795) – $5.29
What are the top-rated Cooling and Climate Controls that fit the 1982 Mazda B2000?
Out of 547 reviews by customers, our 1982 Mazda B2000 Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 1982 Mazda B2000 and their top-rated products:
- Air Conditioning Parts
- Cap & Valve A/C System Seal Kit (15890308) – $16.99
- Engine Cooling Parts
- Cap & Valve A/C System Seal Kit (15890308) – $16.99
What types of Cooling and Climate Controls do you sell for my 1982 Mazda B2000?
As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 1982 Mazda B2000:
Can I get help with 1982 Mazda B2000 Cooling and Climate Control orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mazda Cooling and Climate Controls and more.
What is your return policy for Mazda B2000 Cooling and Climate Controls?
Advance Auto Parts keeps returns simple. For new Mazda B2000 Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
