1982 GMC K3500 Bodies and Fender Parts

More 1982 GMC K3500 Bodies and Fender Parts

Find your specific 1982 GMC K3500 original or aftermarket Bodies and Fender Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1982 GMC K3500 Bodies and Fender Parts

Energy Suspension – Body Cab Mount Set (Part No.3.4121G)

Body Cab Mount Set

from

$147.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More
View Product

KAI – Fender Extension Panel (Part No.RRP114)

Fender Extension Panel

from

$24.99
New Standard Replacement Driver Side Rear Slip-On Fender Section, 41 5/8 X 12

Product Features:
  • 41 5/8 X 12, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Backing Plate (Part No.RRP104)

Backing Plate

from

$7.99
New Standard Replacement Universal Rocker Panel Backing Plate, 26 1/8 X 4 1/4

Product Features:
  • 26 1/8 X 4 1/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Roll Pan (Part No.EFXRP03)

Roll Pan

from

$189.99
New ProEFX Steel Rear Roll Pan, With License Plate Pocket

Product Features:
  • With License Plate Pocket
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Wheel Arch Trim (Part No.GM1290101)

Wheel Arch Trim

from

$19.49
New Standard Replacement Front Driver Side Wheel Opening Molding

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

(1 reviews)
View Product

KAI – Wheel Arch Panel (Part No.RRP113)

Wheel Arch Panel

from

$24.99
New Standard Replacement Passenger Side Slip-On Rear Fender Section, 41 5/8 X 12

Product Features:
  • 41 5/8 X 12, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Quarter Panel (Part No.GMK4174610732R)

Quarter Panel

from

$119.99
New Goodmark Passenger Side Lower Front Quarter Panel Patch, 7 3/4 Inches Wide X 14 1/2 Inches High

Product Features:
  • 7 3/4 Inches Wide X 14 1/2 Inches High
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – B-Pillar/Rocker Panel (Part No.RRP103)

B-Pillar/Rocker Panel

from

$44.99
New Standard Replacement Driver Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4

Product Features:
  • 46 3/4 X 11 3/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Dash Panel Overlay (Part No.DCV010004)

Dash Panel Overlay

from

$254.99
New Standard Replacement Dash Cap, Fits GM Full Size Pick Up/Blazer And Suburban

Product Features:
  • Fits GM Full Size Pick Up/Blazer And Suburban
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Dash Panel Overlay (Part No.DCV010006)

Dash Panel Overlay

from

$284.99
New Standard Replacement Dash Cap, Fits GM Full Size Pick Up/Blazer And Suburban

Product Features:
  • Fits GM Full Size Pick Up/Blazer And Suburban
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Dee Zee – 11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On (Part No.DZ1808)

11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On

from

$39.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.

Product Features:
  • Protect Your Vehicle And Trailer From Rocks And Messy Conditions
  • Classic Diamond Style Design
  • Protected By A BriteGard Powder Coat Finish
  • Compliment Brite-Tread Running Boards
See More
View Product

Husky Liners – Front Or Rear Mud Guards (Part No.56221)

Front Or Rear Mud Guards

from

$76.99
Husky Liners form fit Mud Guards are made from durable, impact resistant all-weather thermoplastic that’s as tough as nails (or rocks for that matter). They’re easy to install, conform perfectly to your fenders, and protect your ride and those around you from the rage of the road.

Product Features:
  • Black
  • Made in the USA
  • Built to the maximum width for full tread coverage of single or dually factory tires.
  • Our durable, impact resistant all-weather thermoplastic material holds up to whatever the road spits at it.
  • Our Exclusive Husky Shield Film is easy to install and provides an invisible protective barrier between the Mud Guard and the vehicle’s paint.
See More

(1 reviews)
View Product

Needa Parts – Panel Trim Retainer – Interior – GM/Chrysler (Part No.45478)

Panel Trim Retainer - Interior - GM/Chrysler

from

$2.49
Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:
  • Needa Parts offers a complete assortment for all popular makes and models
  • Vehicle make specific fastener kits are available
  • All fasteners meet or exceed OEM standards
See More
View Product

Le Bra – Front End Cover (Part No.55495-01)

Front End Cover

from

$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforate

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More
View Product

Le Bra – Front End Cover (Part No.55494-01)

Front End Cover

from

$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforate

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More
View Product

KAI – Spare Tire Bracket (Part No.GMK4144967751)

Spare Tire Bracket

from

$59.99
New Goodmark Spare Tire Support Hook, For Models With Glide-Out Spare Tire, Made Of Steel

Product Features:
  • For Models With Glide-Out Spare Tire Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Rocker Panel (Part No.RRP3789)

Rocker Panel

from

$92.99
New Standard Replacement Driver Side Rocker Panel, 75 X 5.38 X 2.88

Product Features:
  • 75 X 5.38 X 2.88, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Rocker Panel (Part No.RRP3790)

Rocker Panel

from

$97.99
New Standard Replacement Passenger Side Rocker Panel, 75 X 5.38 X 2.88

Product Features:
  • 75 X 5.38 X 2.88, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Quarter Panel Patch (Part No.RRP150)

Quarter Panel Patch

from

$49.99
New Standard Replacement Passenger Side Quarter Panel Rear Section, 60 1/2 X 28

Product Features:
  • 60 1/2 X 28, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Westin – Premier 4 Oval Nerf Step Bars (Part No.22-5025)

Premier 4 Oval Nerf Step Bars

from

$309.99
Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.

Product Features:
  • Vehicle Specific Mounting Kit Required; Sold Separately
  • 4 in. Oval Tube
  • Injection Molded Polymer Step Pad
  • Molded Oval End Caps
  • Bolt-On Installation; No Drilling Required
  • 3 Year Warranty
See More
View Product

Dee Zee – With Step Pads, 6" Oval Straight, Black Textured Powder Coated Steel (Part No.DZ16121)

With Step Pads, 6" Oval Straight, Black Textured Powder Coated Steel

from

$411.99
Trucks these days keep getting bigger and bigger. Whether you use your monster for work or play, the 6 Inch UltraBlack Tube Step design gives you a rugged step for climbing in and out of your beast. Constructed of heavy-duty steel with an oval design our UltraBlack Tube Step features molded plastic end caps and step pads at each door to keep your feet planted securely to the step when entering and exiting the vehicle. The rugged step pads are embossed with the Dee Zee name and provide a stylish non-slip surface. Let face it, as strong as steel is, it is also is susceptible to rust and corrosion. Our UltraBlack Tube step is protected by a textured black NRT (TM) (No Rust Technology) powder coat, a finish specially developed to increase corrosion protection.

Product Features:
  • Mount Kit Not Included
  • Drilling Not Required
  • Made From Rugged 16-Gauge Steel
  • 6 Inch Wide Design To Maximize Step Area
  • Molded Step Pads At Each Door Provide Unmatched Traction
  • Textured Black Powder Coated Featuring NRT (TM)
See More
View Product

Westin – Premier 6 Oval Nerf Step Bars (Part No.22-6020)

Premier 6 Oval Nerf Step Bars

from

$500.99
Westin introduces their new Premier 6 Oval Tube Steps in a highly Polished Stainless Steel or Black Powdercoat Mild Steel finish. The new Premier 6 Oval Side Bars offer tough solid construction with a sleek 5 step pad. Available in 4 lengths 53 75 85 and

Product Features:
  • Unique Style w/Tough Construction
  • Sleek Style And Finish
  • OE Style Look
  • UV Stable 5 in. Wide Step Pad
  • Stylized End Caps
  • Contoured Step Pad
  • Lifetime Warranty
See More
View Product

KAI – Floor Pan (Part No.RRP1255)

Floor Pan

from

$239.99
New Standard Replacement Driver Side Complete Cab Floor Section, Inner And Outer With Backing Plate, 26 1/2 X 23 X 7 1/2

Product Features:
  • Inner And Outer With Backing Plate, 26 1/2 X 23 X 7 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Floor Pan (Part No.RRP147)

Floor Pan

from

$43.99
New Standard Replacement Driver Side Cab Floor, Front Section, 22 1/4 X 29

Product Features:
  • Front Section, 22 1/4 X 29, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Floor Pan (Part No.RRP1250)

Floor Pan

from

$64.99
New Standard Replacement Passenger Side Cab Floor Panel, 15 1/2 X 30

Product Features:
  • 15 1/2 X 30, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Dee Zee – Powder Coated, Black With Chrome Trim, Aluminum, Unlighted, Mounting Kit, 86" L (Part No.DZ16322)

Powder Coated, Black With Chrome Trim, Aluminum, Unlighted, Mounting Kit, 86" L

from

$591.99
Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Black or Chrome

Product Features:
  • Lightweight Aluminum Powder Coated Frame
  • Full Length Protective Accent Trim
  • Slip Resistant Raised Rubber Grommets On The Step Area
  • NRT(TM) Powder Coated Steel Braces
  • Mounting Braces Not Included
  • Widened 6 Inch Step Area
  • No Drilling Required
See More
View Product

Dee Zee – Powder Coated, Black, Steel, Unlighted, Requires Running Board Mounting Kit (Part No.DZ15301S)

Powder Coated, Black, Steel, Unlighted, Requires Running Board Mounting Kit

from

$326.99
Dee Zee Rough Step – Industrial gauge steel coated in Dee Zeeblack NRT (No Rust Technology) powder coat to increase corrosion resistance. Industrial grating step provides extra traction getting in and out of the vehicle while allowing mud, water, snow, and ice to drain off the stepping area.

Product Features:
  • No Rust Technology Powder Coat Is A Specially Designed To Increase Corrosion Protection
  • Industrial Grating Step Provides Extra Traction Getting In And Out Of The Vehicle While Allowing Mud, Water, Snow, And Ice To Drain Off The Stepping Area
  • Rugged 12 Gauge Steel Construction
  • Protective Black Powder Coat Finish
  • Grated Steel Top Provides Unmatched Traction
See More
View Product

Dee Zee – Powder Coated, Black, Aluminum, Unlighted, Mounting Kit Required, 86 Inch Length (Part No.DZ16321)

Powder Coated, Black, Aluminum, Unlighted, Mounting Kit Required, 86 Inch Length

from

$504.99
Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Black or Black

Product Features:
  • Lightweight Aluminum Powder Coated Frame
  • Full Length Protective Accent Trim
  • Slip Resistant Raised Rubber Grommets On The Step Area
  • NRT(TM) Powder Coated Steel Braces
  • Mounting Braces Not Included
  • Widened 6 Inch Step Area
  • No Drilling Required
See More
View Product

1982 GMC K3500 Bodies and Fender Parts

Maybe you’re in the middle of a full rebuild of that 1982 GMC K3500. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 41 different Bodies and Fender Parts in our inventory ranging from $2.49 to $661.99. That means you can find the exact parts or products you need to keep that 1982 GMC K3500 running smoothly.

Bodies and Fender Parts are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1982 GMC K3500. Energy Suspension, Dee Zee, and KAI are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Bodies and Fender Parts for your 1982 GMC K3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1982 GMC K3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Bodies and Fender Parts Brands To Make Your 1982 GMC K3500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1982 GMC K3500 demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your K3500 the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.

Popular KAI Bodies and Fender Parts

We carry KAI parts in our stock across Wheel Arch Trims categories, plus more. For a 1982 GMC K3500, our most popular KAI Bodies and Fender Parts include:
Wheel Arch Trim
from $19.49
(1)
Wheel Arch Trim
Wheel Arch Trims