1982 Ford LTD Differentials

Essential 1982 Ford LTD Differentials

Yukon Gear – 8.8" Ford Tracloc Clutch Set, Both Sides (Part No.16018)

8.8" Ford Tracloc Clutch Set, Both Sides

from

$241.99
8.8″ Ford TracLoc (with short ears–for late models only) clutch set, both sides.

Product Features:
  • Clutch kit
  • Fit Ford 8.8″ Trac Loc positraction
See More

Yukon Gear – Pinion Seal For 7.5", 8.8", And 9.75" Ford, And Also 1985-’86 9" Ford (Part No.30037)

Pinion Seal For 7.5", 8.8", And 9.75" Ford, And Also 1985-'86 9" Ford

from

$8.99
Pinion seal for 7.5″, 8.8″, and 9.75″ Ford, and also 1985-’86 9″ Ford.Yukon Mighty seal.

Product Features:
  • Pinion seal
  • Fits Ford 7.5″, 8.8″ and some 9.75″
  • 2.785″ O.D.
See More

Pro-King – Differential Pinion Shim Kit (Part No.742G202)

Differential Pinion Shim Kit

from

$5.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Motive Gear – Differential Bearing Kit – Koyo (Part No.R8.8R)

Differential Bearing Kit - Koyo

from

$108.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • KIT BRG.&SEAL FORD 8.8
See More

Yukon Gear – Standard Open Spider Gear Kit For 9" Ford With 31 Spline Axles And 4-Pinion Design (Part No.16034)

Standard Open Spider Gear Kit For 9" Ford With 31 Spline Axles And 4-Pinion Design

from

$317.99
Yukon standard open spider gear kit for 9″ Ford with 31 spline axles and 4-pinion design. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fit Ford 9″ open differential with 31 spline axles
  • Includes two side gears, four pinion gears, cross pin shaft, roll pins and spider gear thrust washers.
See More

Yukon Gear – Pinion Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford (Part No.33297)

Pinion Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford

from

$8.99
Pinion gear thrust washer (0.750″ shaft) for 8.8″ Ford.

Product Features:
  • Pinion gear thrust washer
  • Fits Ford 8.8″
  • 0.750″ I.D.
See More

Yukon Gear – Cover Bolt For Ford 7.5", 8.8" & 9.75" (Part No.33554)

Cover Bolt For Ford 7.5", 8.8" & 9.75"

from

$6.99
Yukon 1541H alloy replacement rear axle for Dana 60, 70, and 80, 35 spline. (40″ to 43.5″) Full float axle (8×3.96″ ). Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a full-floating axle.

Product Features:
  • 35 spline
  • 8 x 3.96″ bolt pattern
  • Cut to length design fits 40″-43.5″ applications
  • Fits Dana Spicer 60, 70 and 80
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-89410)

Tapered Roller Bearing

from

$4.99
Product Features:
  • Brand may vary by location
See More

Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.SS9)

Differential Pinion Solid Spacer Kit w/Shims

from

$45.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Yukon Gear – Pinion Install Kit For Ford 9" Differential (Part No.13042)

Pinion Install Kit For Ford 9" Differential

from

$175.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 9″ without aftermarket Daytona pinion support
  • Included are pinion bearings and races, pinion seal, pilot bearing , crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Dorman – Differential Clutch Kit (Part No.697-780)

Differential Clutch Kit

from

$262.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles.
  • Quality materials – all components are built for reliable longevity and performance.
  • Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

National – Shaft Repair Sleeve (Part No.99193)

Shaft Repair Sleeve

from

$43.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

Yukon Gear – Carrier Installation Kit For Ford 8.8" Differential (Part No.57007)

Carrier Installation Kit For Ford 8.8" Differential

from

$134.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8″ differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Ford 8.8″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Dorman – Differential Ring And Pinion Set (Part No.697-816)

Differential Ring And Pinion Set

from

$315.99
This differential ring and pinion directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this ring and pinion set matches the fit and function of the original components on certain vehicle applications.
  • Effective fix – eliminates grinding and whining from failed original bearings.
  • Thoroughly tested – vehicle try-on testing and rigorous quality control measures ensure longevity
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Yukon Gear – Crush Sleeve Eliminator Kit For Ford 8.8" & 7.5" (Part No.55040)

Crush Sleeve Eliminator Kit For Ford 8.8" & 7.5"

from

$96.99
2 piece solid spacer for Ford 8.8 and 7.5.

Product Features:
  • Crush sleeve eliminator kit for Ford 7.5″ and 8.8″
See More

Yukon Gear – Trao Loc Spring For Ford 8.8", 28 Spline (Part No.33515)

Trao Loc Spring For Ford 8.8", 28 Spline

from

$63.99
Product Features:
  • Trac Loc spring
  • Fits 28 spline Ford 8.8
See More

Yukon Gear – Trac Loc Case For Ford 8" (Part No.20075)

Trac Loc Case For Ford 8"

from

$379.99
8″ TracLoc case, bare, 2 or 4 PIN, 4 TAB clutch design.

Product Features:
  • Trac Loc positraction carrier case
  • Does not include spider gears
  • Fits Ford 8″
See More

Yukon Gear – 1310 And 1330 U/Bolt Kit (2 U-Bolts And 4 Nuts) For 9" Ford (Part No.41112)

1310 And 1330 U/Bolt Kit (2 U-Bolts And 4 Nuts) For 9" Ford

from

$18.99
1310 and 1330 U/bolt kit (2 U-bolts and 4 nuts) for 9″ Ford.

Product Features:
  • u-joint u-bolt kit
  • Fits Ford 9″
  • 1310 and 1330 u-joint size
  • Includes two u-bolts and four nuts
See More

Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)

Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette

from

$59.99
Product Features:
  • Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
  • Interlocking design makes installation much easier
See More

USA Standard Gear – Pinion Installation Kit For ’09 & Down Ford 8.8 (Part No.60009)

Pinion Installation Kit For '09 & Down Ford 8.8

from

$119.99
8.8″ FORD 09 & DWN PINION KIT .

Product Features:
  • Fits 2009 and down Ford 8.8″
  • Uses Koyo bearings and races
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

Yukon Gear – Trac Loc Positraction, Ford 8.8", 31 Spline, With Carbon Fiber Clutches (Part No.20130)

Trac Loc Positraction, Ford 8.8", 31 Spline, With Carbon Fiber Clutches

from

$774.99
Yukon Trac Loc positraction, Ford 8.8″, 31 spline, with Carbon Fiber clutches.

Product Features:
  • Trac Loc positraction carrier case
  • Includes spider gears
  • Fits Ford 8.8″ with 31 spline axles
  • Carbon fiber clutches
See More

Powertrax – Grip LS Traction System (Part No.LS108831)

Grip LS Traction System

from

$463.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Standard Open And Tracloc Cross Pin Block For 9" Ford (Part No.33336)

Standard Open And Tracloc Cross Pin Block For 9" Ford

from

$30.99
Standard open and TracLoc cross pin block for 9″ Ford.

Product Features:
  • Cross pin block
  • Fits Ford 9″
See More

Motive Gear – Differential Gear Install Kit (Part No.F8.8IK)

Differential Gear Install Kit

from

$35.99


Product Features:
  • MINI INSTALL KIT FORD 8.8
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Pinion Nut (Part No.33154)

Pinion Nut

from

$7.99
Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.

Product Features:
  • Pinion nut for Ford 7.5″, 8″ and 9″
  • 3/4″ x 20 thread
  • 1 1/6″ socket
See More

1982 Ford LTD Differentials

Maybe you’re in the middle of a full rebuild of that 1982 Ford LTD. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 164 different Differentials in our inventory ranging from $0.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1982 Ford LTD running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1982 Ford LTD. FELPRO, Driveworks, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1982 Ford LTD, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,090 reviews in this category, some of the top rated parts include Differential Shaft Lock Bolt with 4.0 stars and Differential Master Bearing Kit – Timken with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1982 Ford LTD rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1982 Ford LTD Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1982 Ford LTD demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your LTD the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Powertrax Differentials

We carry Powertrax parts in our stock across Complete Differentials categories, plus more. For a 1982 Ford LTD, our most popular Powertrax Differentials include:
Lock Right Locker
from $444.99
(1)
Lock Right Locker
Complete Differentials

Top 1982 Ford LTD Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1982 Ford LTD. Popular Felpro parts include:
Differential Cover Gasket
from $14.99
(121)
Differential Cover Gasket
Rear Differential Cover Gaskets
Differential Cover Gasket
from $6.49
(13)
Differential Cover Gasket
Rear Differential Cover Gaskets

FAQs for 1982 Ford LTD Differentials

What are the most purchased Differentials for the 1982 Ford LTD?

Out of 164 Differentials for the 1982 Ford LTD, the most popular in our inventory are:
Taper Bearing Set
from $10.79
(33)
Taper Bearing Set
Differential Bearings
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $23.99
(7)
Bearings
Front Differential Pinion Bearings

What are the top-rated 1982 Ford LTD Differentials?

Top-rated Differentials for your 1982 Ford LTD based on customer reviews/ratings are:
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
“great”
Differential Master Bearing Kit - Timken
from $137.99
(8)
Differential Master Bearing Kit – Timken
“These Timken bearings work great in my 10 second drag car.”
Wheel Bearing and Seal Kit
from $169.99
(4)
Wheel Bearing and Seal Kit
“Complete kit with for my rebuild. I was lucky to get awesome service from the salesman. Parts were very reasonable price-wise.”