1982 Ford F-100 Pickup Drivetrains
More 1982 Ford F-100 Pickup Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1982 Ford F-100 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1982 Ford F-100 Pickup Drivetrains
Yukon Gear – Pinion Install Kit For Dana 60 Rear Differential (Part No.13032)
from
$295.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 rear
- Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
Driveworks – Taper Bearing Cone (Part No.S-HM-88649)
from
$19.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Axle Bearing Retainer For Ford 9", Large & Small Bearing, 3/8" Bolt Holes (Part No.33466)
from
$22.99
Product Features:
See More
- Axle bearing retainer for Ford 9″
- Fits large and small bearing applications
- 3/8″ bolt holes
- 3 9/16″ x 2″ bolt pattern
Yukon Gear – Minor Install Kit For Ford 9" Differential (Part No.12036)
from
$54.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), marking compound and brush.
Product Features:
See More
Product Features:
- Fits Ford 9″
- Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
Yukon Gear – 8" & 9" Ford 4-Tab Clutch Kit With 9 Pieces (Part No.16029)
from
$187.99
8″ & 9″ Ford 4-Tab clutch kit with 9 pieces (late TracLoc).
Product Features:
See More
Product Features:
- Clutch kit
- Fits Ford 8″ and 9″ Trac Loc positraction
Yukon Gear – O-Ring For 9" Ford (Part No.30028)
from
$14.99
O-ring for 9″ Ford.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion support o-ring
- Fits Ford 9″
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.378)
from
$36.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
- GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Spicer – Axle Shft Univ Joint (Part No.5-3226X)
from
$47.99
Axle Shft Univ Joint
Milemarker – MileMarker Supreme; Manual Hub (Part No.104)
from
$204.99
Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.
Product Features:
See More
Product Features:
- Ultimate In Style And Service
- Latest Patented Technology
- Smooth Operation
- Limited Lifetime Warranty
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Yukon Gear – Spindle Nut Retainer, 2.030" I.D., 8 Bent Over TABS (Part No.33480)
from
$8.99
Spindle nut retainer, 2.030″ I.D., 8 bent over tabs. This replaces Spicer part number 33733.
Product Features:
See More
Product Features:
- Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
- 2.030″ I.D.
- 8 bent over tabs
National – Shaft Repair Sleeve (Part No.99106)
from
$33.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Multi Purpose Seal (Part No.51098)
from
$7.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Outer Stub Thrust Washer For Dana 30 & 44 (Part No.33534)
Yukon Gear – Adaptor Washer For 28 Spline Pinion In Oversize Support, For 9" Ford (Part No.32240)
from
$71.99
Adaptor washer for 28 spline pinion in oversize support, for 9″ Ford.
Product Features:
See More
Product Features:
- Adapter washer
- Fits Ford 9″
- Adapts 28 spline pinion into 35 spline pinion support
Powertrax – Lock Right Locker (Part No.2415-LR)
from
$442.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
National – Bearings (Part No.A-5)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Motive Gear – Differential Pinion Shaft (Part No.B7AZ4211A)
Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)
from
$51.99
One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.
Product Features:
See More
Product Features:
- Carrier race
- Fits Ford 9″
- Conversion race to install small bearing carrier into 3.250″ dropout
Dorman – Help – Driveshaft Flange Bolts (Part No.80992)
from
$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Trac Loc Spring Plate For Ford 9" & 8" (Part No.33517)
Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.SS9)
from
$45.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
National – Bearings (Part No.B-2610)
from
$27.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 9" In A 3.25 Ratio (Part No.24367)
from
$449.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits Ford 9″
- 9.00″ ring gear diameter
- 28 spline pinion
- 10 ring gear bolts
- 3.25 ratio
Yukon Gear – Differential (Part No.26039)
from
$869.99
Differential
Yukon Gear – Replacement Standard Open Carrier Case For Dana 60, 4.56 & Up (Part No.20046)
from
$389.99
Yukon replacement standard open carrier case for Dana 60, 4.56 & up (incl ABS) 2-7/16″ tall.
Product Features:
See More
Product Features:
- Standard open carrier case
- Does not include spider gears
- Fits Dana Spicer 60
- 4.56 and up ratio only
- ABS and non-ABS compatible
Mr. Gasket – Rear End Gasket – Ford 9" – Blend Of Nitrile Rubber And Fiber For Excellent Sealing And Durability (Part No.82)
from
$21.79
Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1957-1981 Ford 10 bolt 9 inch ring gear.
Product Features:
See More
Product Features:
- .047″ thick cellulose/nitrile composite gasket material
- Precision die cut
- Reusable
Yukon Gear – Dana 44 Cover Gasket Replacement (Part No.23006)
Popular 1982 Ford F-100 Pickup Drivetrains Categories
1982 Ford F-100 Pickup Drivetrains
You count on your 1982 Ford F-100 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 401 Drivetrains ranging in price from $1.99 to $1,211.99, you’re sure to find everything you need for your 1982 Ford F-100 Pickup.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 19 different brands like Moog, National, and Driveworks. 1982 Ford F-100 Pickup Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,176 extensive product reviews on 1982 Ford F-100 Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are Multi Purpose Bearing with 3.4 stars and MileMarker Street Master; Manual Hub with 4.6 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1982 Ford F-100 Pickup below to get started!
Top-Rated Drivetrains Brands For Your 1982 Ford F-100 Pickup
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1982 Ford F-100 Pickup running right for years to come. In our inventory you’ll find brands like Moog, National, Driveworks, and even more.
Popular Spicer Drivetrains
You’ll find popular Spicer brand products across Universal Joints. All are waiting to get your 1982 Ford F-100 Pickup back on the road. Some of the top-rated Spicer products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1982 Ford F-100 Pickup, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1982 Ford F-100 Pickup Drivetrains
What are the most purchased Drivetrains for the 1982 Ford F-100 Pickup?
Out of 401 Drivetrains for the 1982 Ford F-100 Pickup, the most popular in our inventory are:
What are the top-rated 1982 Ford F-100 Pickup Drivetrains?
Top-rated Drivetrains for your 1982 Ford F-100 Pickup based on customer reviews/ratings are:
