1982 Ford E-350 Econoline Differentials

Essential 1982 Ford E-350 Econoline Differentials

Yukon Gear – Bearing Race Driver (Part No.56020)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M802011 race
  • All steel construction
See More

Dorman – Help – Pinion Crush Sleeves (Part No.81056)

Pinion Crush Sleeves

from

$5.99
This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
  • Required replacement – when servicing the differential
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Pinion Gear Thruster Washer For 10.25" Ford (Part No.33294)

Pinion Gear Thruster Washer For 10.25" Ford

from

$9.99
Pinion gear thruster washer for 10.25″ Ford.

Product Features:
  • Pinion gear thrust washer
  • Fits Ford 10.25″
See More

Yukon Gear – Cross Pin Bolt With 5/16 X 18 Thread For 10.25" Ford (Part No.33241)

Cross Pin Bolt With 5/16 X 18 Thread For 10.25" Ford

from

$11.99
Cross pin bolt with 5/16 x 18 thread for 10.25″ Ford.

Product Features:
  • Cross pin bolt for Ford 9.75″ and 10.25″ with c-clip axles
  • 5/16″ x 18 thread
See More

Yukon Gear – Zip Locker Switch (Part No.34015)

Zip Locker Switch

from

$16.99
ZIP locker switch.

Product Features:
  • Switch
See More

National – Bearings (Part No.HM803146)

Bearings

from

$47.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Dana 80 Tracloc Clutch Set Round Design (Part No.16157)

Dana 80 Tracloc Clutch Set Round Design

from

$502.99
Dana 80 TracLoc clutch set round design (remove 4 plates 4 V-Type).

Product Features:
  • Clutch kit
  • Fit Dana Spicer 80 Trac Loc positraction
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Victor Reinz – Differential Cover Gasket (Part No.71-14868-00)

Differential Cover Gasket

from

$8.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

USA Standard Gear – Master Overhaul Kit Dana 70 Differential (Part No.37022)

Master Overhaul Kit Dana 70 Differential

from

$494.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Dana Spicer 70
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Super Carrier Shim Kit For Ford 10.25" (Part No.55004)

Super Carrier Shim Kit For Ford 10.25"

from

$48.99
10.25″ Ford carrier Supershims.

Product Features:
  • Super carrier shim kit for Ford 10.25″ and 10.5″
  • Interlocking design makes installation much easier
See More

Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

Replacement Baffle For Dana 60 & Dana 70-U

from

$6.99
Product Features:
  • Oil baffle for Dana Spicer 60 and Dana Spicer 70U
See More

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

Motive Gear – Ring Gear Bolt (Part No.E5TZ4216A)

Ring Gear Bolt

from

$2.99


Product Features:
  • Ford 10.25″RING GEAR BOLT 1.33″ O.A. 1″ THREADS
See More

Yukon Gear – Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread (Part No.33144)

Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread

from

$7.99
Replacement pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan rear. 1 5/16″ nut, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for Jeep JK rear, Dana Spicer 44HD, 60, 70, 70U, 70HD and Nissan Titan rear
  • 7/8″ x 14 thread
  • 1 5/16″ socket
See More

Yukon Gear – Pinion Install Kit For Dana 70-U Differential (Part No.13035)

Pinion Install Kit For Dana 70-U Differential

from

$349.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 70U
  • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
See More

USA Standard Gear – Ring/Pinion Sets (Part No.36093)

Ring/Pinion Sets

from

$454.99
Ring/Pinion Sets

Yukon Gear – Steel Cover For Ford 10.25" (Part No.32324)

Steel Cover For Ford 10.25"

from

$189.99
Product Features:
  • Fits Ford 10.25″
  • Steel
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Replacement Positraction Internals For Dana 60 And 61 (Full-Floating) With 30 Spline Axles (Part No.16086)

Replacement Positraction Internals For Dana 60 And 61 (Full-Floating) With 30 Spline Axles

from

$892.99
Yukon replacement positraction internals for Dana 60 and 61 (full-floating) with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits Dana Spicer 60 with Trac Loc positraction with 30 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

USA Standard Gear – Spartan Locker For Dana Spicer 60 With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17003)

Spartan Locker For Dana Spicer 60 With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft

from

$829.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:
  • Fits Dana Spicer 60 with 30 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

Yukon Gear – Long Yoke For ’93 And Newer Ford 10.25" With A 1350 U/Joint Size (Part No.41040)

Long Yoke For '93 And Newer Ford 10.25" With A 1350 U/Joint Size

from

$244.99
Yukon long yoke for ’93 and newer Ford 10.25″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits 1993 and up Ford 10.25″
  • 31 spline
  • 1350 u-joint size
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Outside snap ring design
  • Strap style
See More

Yukon Gear – Seal Housing For Ford 10.25" & 10.5", Zip Locker, With O-Rings (Part No.34040)

Seal Housing For Ford 10.25" & 10.5", Zip Locker, With O-Rings

from

$78.99
Seal housing for Ford 10.25″ & 10.5″, Zip locker, with o-rings.

Product Features:
  • Seal housing for Ford 10.25″ and 10.5″
  • Includes o-rings
See More

Yukon Gear – Replacement Standard Open Carrier Case For Dana 70, 4.10 & Down (Part No.20045)

Replacement Standard Open Carrier Case For Dana 70, 4.10 & Down

from

$352.99
Yukon replacement standard open carrier case for Dana 70, 4.10 & down (incl ABS).

Product Features:
  • Standard open carrier case
  • Fits Dana Spicer 70
  • 4.41 and down ratio only
  • Does not include spider gears
See More

Yukon Gear – Standard Open Side Gear And Thruster Washer For 10.25" Ford (Part No.33293)

Standard Open Side Gear And Thruster Washer For 10.25" Ford

from

$11.99
55P Chevy Passenger Drop Out gasket.

Product Features:
  • Side gear thrust washer
  • Fits Ford 10.25″
See More

Yukon Gear – Set Up Bearing (Part No.56040)

Set Up Bearing

from

$264.99
Set-up carrier bearing kti (2 bearings, no races) for Dana 70 HD and Dana 80. 469. No return.

Product Features:
  • Set up bearing kit
  • Fits Dana Spicer 80
  • Easily slips on and off carrier journals to allow for easier carrier shim adjustment
See More

USA Standard Gear – Bearing Kit For Dana 70U (Part No.58025)

Bearing Kit For Dana 70U

from

$274.99
This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits Dana Spicer 70U
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, oil baffles and slingers, marking compound and brush.
See More

National – Multi Purpose Seal (Part No.719316)

Multi Purpose Seal

from

$23.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

1982 Ford E-350 Econoline Differentials

Maybe you’re in the middle of a full rebuild of that 1982 Ford E-350 Econoline. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 248 different Differentials in our inventory ranging from $3.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1982 Ford E-350 Econoline running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1982 Ford E-350 Econoline. Yukon Gear, Dorman, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1982 Ford E-350 Econoline, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 238 reviews in this category, some of the top rated parts include DIFFERENTIAL GASKET with 3.0 stars and Differential Cover Gasket with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1982 Ford E-350 Econoline rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1982 Ford E-350 Econoline Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1982 Ford E-350 Econoline demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your E-350 Econoline the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular National Differentials

We carry National parts in our stock across Differential Bearings and Rear Differential Pinion Bearings categories, plus more. For a 1982 Ford E-350 Econoline, our most popular National Differentials include:
Bearings
from $22.99
(3)
Bearings
Differential Bearings
Bearings
from $9.99
(8)
Bearings
Rear Differential Pinion Bearings

FAQs for 1982 Ford E-350 Econoline Differentials

What are the most purchased Differentials for the 1982 Ford E-350 Econoline?

Out of 248 Differentials for the 1982 Ford E-350 Econoline, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Rear Differential Cover
from $63.99
This product is not rated
Rear Differential Cover
Differential Covers
Pinion Crush Sleeves
from $5.99
This product is not rated
Pinion Crush Sleeves
Differential Crush Sleeves

What are the top-rated 1982 Ford E-350 Econoline Differentials?

Top-rated Differentials for your 1982 Ford E-350 Econoline based on customer reviews/ratings are:
DIFFERENTIAL GASKET
from $8.29
(4)
DIFFERENTIAL GASKET
“Great Product”
Differential Cover Gasket
from $15.99
(1)
Differential Cover Gasket
“OEM only uses silicone , the gasket set with a thin layer of silicone is a much better sealant method”
Differential Ring and Pinion
from $245.99
(1)
Differential Ring and Pinion
“You get a good set of gears for a good price. Found same set other places for a lot more money. Would recommend this .”