1982 Chevrolet Malibu Drivetrains

Essential 1982 Chevrolet Malibu Drivetrains

Yukon Gear – Yoke For GM 8.5" With A 1310 U/Joint Size (Part No.41086)

Yoke For GM 8.5" With A 1310 U/Joint Size

from

$449.99
Yukon yoke for GM 8.5″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 8.5″
  • 30 spline
  • 1310 u-joint size
  • Outside snap ring design
  • 3.219″ snap ring span
  • 1.062″ cap diameter
  • Strap style
See More

Pro-King – Differential Cross Shaft (Part No.742G930)

Differential Cross Shaft

from

$2.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – 8.2" & 8.5" Rear Cover Gasket (Part No.23020)

8.2" & 8.5" Rear Cover Gasket

from

$10.99
8.2″ & 8.5″ rear cover gasket.

Product Features:
  • Cover gasket
  • Fits GM 8.2″, 8.5″ and 8.6″
See More

Yukon Gear – Pinion Nut Washer (Part No.33167)

Pinion Nut Washer

from

$14.99
Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

Product Features:
  • Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.
See More

USA Standard Gear – Standard Spider Gear Set For GM 8.5", 28 Spline (Part No.39026)

Standard Spider Gear Set For GM 8.5", 28 Spline

from

$209.99
Product Features:
  • Spider gear kit
  • Fits GM 8.5″ 28 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Dorman – Rear Drive Shaft (Part No.986-405)

Rear Drive Shaft

from

$709.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Driveshaft Slip Yoke (Part No.697-557)

Driveshaft Slip Yoke

from

$152.99
Drive shaft slip yoke vibrating, clunking or failed completely? This slip yoke directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles
  • Effective fix – replacement restores safe, smooth driveline operation
  • Rigorously tested – designed and evaluated to assure safe, reliable operation
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Differential Pinion Shim Kit

from

$7.49
High-quality Differential Component Shim

Product Features:
  • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
See More

Yukon Gear – 7.5" & 8.2" GM Redi Sleeve Yoke Saver (Part No.30221)

7.5" & 8.2" GM Redi Sleeve Yoke Saver

from

$136.99
7.5″ & 8.2″ GM REDI sleeve yoke saver.Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits GM 7.5″, 7.625″ and 8.2″
See More

Yukon Gear – Cross Pin Bolt (Part No.33067)

Cross Pin Bolt

from

$6.99
Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.

Product Features:
  • Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS
See More

Richmond Gear – Differential Spool Bearing Kit (Part No.29-0013-1)

Differential Spool Bearing Kit

from

$58.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Dorman – Spindle Nut 3/4 In.-20 Hex Size 1-1/16 In. (Part No.615-065.1)

Spindle Nut 3/4 In.-20 Hex Size 1-1/16 In.

from

$6.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Motive Gear – Differential Carrier Gear Kit (Part No.GM12BI)

Differential Carrier Gear Kit

from

$163.99


Product Features:
  • GM 8 7/8″ OPEN INTERNAL KIT CAR & TRUCK
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Yukon Gear – C/Clip For GM 7.5", 7.6" & 8" (Part No.33082)

C/Clip For GM 7.5", 7.6" & 8"

from

$14.99
Product Features:
  • c-clip for GM 7.5″, 7.625″ and 8.0″
See More

Yukon Gear – U/Joint Strap Bolt For 14T, 7.5", And 8.5" GM (Part No.33351)

U/Joint Strap Bolt For 14T, 7.5", And 8.5" GM

from

$8.49
U/joint strap bolt for 14T, 7.5″, and 8.5″ GM.

Product Features:
  • u-joint strap bolt for GM 10.5″ 14 bolt truck, 7.5″ and 8.5″
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-553)

Differential Pinion Yoke Assembly

from

$221.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Yukon Gear – Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5" (Part No.55001)

Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5"

from

$59.99
Product Features:
  • Super carrier shim kit for Ford 7.5″, GM 7.5″, 7.625″, 7.6″ IFS, 7.6″ IRS, 7.75″, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and GM 8.5″ front and rear
  • Interlocking design makes installation much easier
See More

Yukon Gear – R1563Tav Rear Axle Bearing And Seal Kit (Part No.10004)

R1563Tav Rear Axle Bearing And Seal Kit

from

$42.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1563TAV axle bearing and seal kit, TorringtonBrand, 2.250″ OD, 1.400″ ID. This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • Torrington Brand
  • 2.250″ O.D.
  • 1.400″ I.D.
See More

Yukon Gear – Grizzly Locker For GM 8.5" & 8.6", 30 Spline, 2.73 & Up (Part No.28035)

Grizzly Locker For GM 8.5" & 8.6", 30 Spline, 2.73 & Up

from

$1153.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!

Product Features:
  • Fits GM 8.5″ and 8.6″ with 30 spline axles
  • 2.73 and up ratio only
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

ARP Auto Racing – For Use With General Motors, 0.800" Head L, 3/8" – 24 Thread Size, Chrome Moly (Part No.230-3001)

For Use With General Motors, 0.800"  Head L, 3/8" - 24 Thread Size, Chrome Moly

from

$40.49
The tremendous shock loads generated at launch by most any drag racing vehicle equipped with todays sticky tire compounds or the acceleration and deceleration of oval track cars put considerable strain on the ring gear. For this reason, the fastener experts at ARP have developed the Pro Series ring gear bolts. They are forged from premium grade 8740 chrome moly steel and are heat treated to a nominal rating of 200,000 PSI tensile strength. Specially hardened, precision ground washers are included where required. Available to fit most any ring gear setup ranging from popular 9 Inch Ford GM 10 and 12 bolt rear ends to the beefy strange differentials found in top fuel and funny car applications.

Product Features:
  • Forged From Premium Grade 8740 Chrome Moly Steel
  • Heat Treated
  • Nominally Rated At 200,000 Psi Tensile Strength
  • Specially Hardened, Precision Ground Washers
  • 3/8″-24 RH Thread Size
  • 0.8″ Underhead Length
  • 200,000 PSI
See More

Driveworks – Oil Seal (Part No.S-8611N)

Oil Seal

from

$7.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Carrier Installation Kit For GM 8.5" Differential With HD Bearings (Part No.57009)

Carrier Installation Kit For GM 8.5" Differential With HD Bearings

from

$148.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.5″ differential with HD bearings for large journal carrier. This kit contains carrier bearings, races and shims. This kit is used in 8.5″ differentials using a Yukon Dura Grip, Eaton posi, ValueTrac, True Trac, Pro-Series Auburn, Detroit Locker or standard carrier with large bearing journals.

Product Features:
  • Fits GM 8.5″ with aftermarket positraction
  • Works with Heavy Duty Bearings
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Motive Gear – Differential Mini Spool (Part No.MS10C-28)

Differential Mini Spool

from

$98.99


Product Features:
  • MINI SPOOL GM 10 BOLT 8.2″ 28 SPLINE
See More

Dorman – Rear Axle Shaft, Left or Right (Part No.630-139)

Rear Axle Shaft, Left or Right

from

$319.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

National – Multi Purpose Seal (Part No.8835S)

Multi Purpose Seal

from

$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (Part No.618-005.1)

Spindle Washer - I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In.

from

$3.79
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Popular 1982 Chevrolet Malibu Drivetrains Categories

1982 Chevrolet Malibu Drivetrains

You count on your 1982 Chevrolet Malibu to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 293 Drivetrains ranging in price from $1.99 to $1,153.99, you’re sure to find everything you need for your 1982 Chevrolet Malibu.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 16 different brands like Moog, Valvoline, and Driveworks. 1982 Chevrolet Malibu Drivetrains start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 6,715 extensive product reviews on 1982 Chevrolet Malibu Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.2 stars and Greaseable Super Strength Universal Joint with 3.8 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1982 Chevrolet Malibu below to get started!

Top-Rated Drivetrains Brands For Your 1982 Chevrolet Malibu

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1982 Chevrolet Malibu running right for years to come. In our inventory you’ll find brands like Moog, Valvoline, Driveworks, and even more.

Popular Felpro Drivetrains

You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1982 Chevrolet Malibu back on the road. Some of the top-rated Felpro products in these categories are:
DIFFERENTIAL GASKET
from $7.99
(45)
DIFFERENTIAL GASKET
Rear Differential Cover Gaskets

FAQs for 1982 Chevrolet Malibu Drivetrains

What are the most purchased Drivetrains for the 1982 Chevrolet Malibu?

Out of 293 Drivetrains for the 1982 Chevrolet Malibu, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $26.99
(89)
Greaseable Premium Universal Joint
U-Joints
Taper Bearing Set
from $10.29
(38)
Taper Bearing Set
Differential Bearings
Universal Joint
from $15.99
(52)
Universal Joint
U-Joints

What are the top-rated 1982 Chevrolet Malibu Drivetrains?

Top-rated Drivetrains for your 1982 Chevrolet Malibu based on customer reviews/ratings are:
Greaseable Super Strength Universal Joint
from $34.99
(48)
Greaseable Super Strength Universal Joint
“Moog and advanced auto got me out of a bad situation with an amazing part ( u”
Greaseable Super Strength Universal Joint
from $36.99
(41)
Greaseable Super Strength Universal Joint
“Easy install and great way to have sting durability with access to grease points”
Oil Seal
from $5.49
(38)
Oil Seal
“Exact fit , price was good”