1982 Chevrolet K30 Drivetrains
More 1982 Chevrolet K30 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1982 Chevrolet K30, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1982 Chevrolet K30 Drivetrains
Spicer – Universal Joint (Part No.5-153X)
from
$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
National – Bearings (Part No.HM88510)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Cardone – Front Drive Shaft: Greasable, Direct Replacement (Part No.65-9351)
from
$548.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Pro-King – Differential Internal Nest Kit (Part No.744A717)
from
$323.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – Replacement Outer Stub Axle For Dana 60 And 70 (Part No.21065)
from
$253.99
Yukon replacement outer stub axle for Dana 60 and 70 with a length of 12.0″ inches and with 35 splines. Yukon front axles come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits 1977-1991 GM one ton front and 1981-1993 Dodge one ton front
- Outer stub
- 35 spline
- 12″ from end of splines to center of u-joint bore
Yukon Gear – Replacement Cross Pin Shaft For Dana 44, Standard Open (Part No.33318)
from
$16.99
Product Features:
See More
- Cross pin shaft for Dana Spicer 44
- Fits standard open differentials only
Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)
Driveworks – Taper Bearing Cone (Part No.S-HM-88649)
from
$19.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)
from
$7.99
Dana 60 & Dana 70 Power Lok case bolt.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 60 and 70
- 7/16 x 14 thread
- 3.5″ long
- 9/16″ hex head
Yukon Gear – Dana 44 Pinion Gear Thrust Washer (Part No.33281)
from
$4.99
Dana 44, GM55P & 8.2″ GM pinion gear Thrust washer.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Dana Spicer 44, GM 8.2″ and 1955-1964 GM passenger car
National – Bearings (Part No.R-1581-TV)
from
$44.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- High radial load capacity makes them suitable for high speed applications
- Industry leading coverage
- Professional technicians know they can depend on National
USA Standard Gear – Replacement Standard Spider Gear Set For Dana 70, 35 Spline (Part No.39011)
from
$249.99
Product Features:
See More
- Spider gear kit
- Fit Dana Spicer 70 and 80 open differential with 35 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size (Part No.41022)
from
$233.99
Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 and 70
- 29 spline
- 1310 u-joint size
- Outside snap ring design
- 3.219″ snap ring span
- 1.062″ cap diameter
- Strap style
Yukon Gear – Pinion Depth Shims For 10.5" GM 14 Bolt Truck (Part No.55058)
from
$37.99
14T GM pinion shim kit.
Product Features:
See More
Product Features:
- Pinion depth shims for GM 10.5″ 14 bolt truck
National – Bearings (Part No.453X)
from
$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
Yukon Gear – Replacement Standard Open Carrier Case For Dana 44, 30 Spline, 3.73 & Down, Bare (Part No.20115)
from
$203.99
Yukon replacement standard open carrier case for Dana 44, 30 spline, 3.73 & down, bare. This case includes carrier shims, roll pin, ring gear bolts and a cover gasket.
Product Features:
See More
Product Features:
- Standard open carrier case
- Does not include spider gears
- Includes carrier shims, roll pin, ring gear bolts and a cover gasket.
- Fits Dana Spicer 44
- 3.73 and down ratio only
Yukon Gear – U/Joint Strap Bolt For 14T, 7.5", And 8.5" GM (Part No.33351)
from
$8.49
U/joint strap bolt for 14T, 7.5″, and 8.5″ GM.
Product Features:
See More
Product Features:
- u-joint strap bolt for GM 10.5″ 14 bolt truck, 7.5″ and 8.5″
National – Bearings (Part No.HM88610)
from
$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Spindle Bearing For Dana 44 (Part No.33493)
from
$23.99
Spindle bearing for Dana 44. This replaces Spicer part number 550759.
Product Features:
See More
Product Features:
- Spindle bearing
- Fits Dana Spicer 44
Yukon Gear – O-Ring For Toyota & Dana 44 Zip Locker Seal Housing (Part No.34004)
from
$11.29
Product Features:
See More
- O-ring for seal housing
- Fits Dana Spicer 44 and Toyota 8″ and V6
Yukon Gear – 20 Long Air Line For Zip Locker (Part No.34002)
Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)
from
$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.
Product Features:
See More
Product Features:
- Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
Milemarker – Spindle Nut Socket (Part No.15002-01)
USA Standard Gear – Spartan Locker for Dana 60 Differential with 35 Spline Axles, Includes Heavy-duty Cross Pin Shaft (Part No.17004)
from
$829.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 with 35 spline axles
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
Driveworks – Oil Seal (Part No.S-9316)
from
$3.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.2720)
from
$12.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Popular 1982 Chevrolet K30 Drivetrains Categories
1982 Chevrolet K30 Drivetrains
You count on your 1982 Chevrolet K30 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 459 Drivetrains ranging in price from $1.89 to $1,487.99, you’re sure to find everything you need for your 1982 Chevrolet K30.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 23 different brands like Moog, Valvoline, and Driveworks. 1982 Chevrolet K30 Drivetrains start as low as $1.89!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 6,150 extensive product reviews on 1982 Chevrolet K30 Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.2 stars and Greaseable Super Strength Universal Joint with 3.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1982 Chevrolet K30 below to get started!
Top-Rated Drivetrains Brands For Your 1982 Chevrolet K30
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1982 Chevrolet K30 running right for years to come. In our inventory you’ll find brands like Moog, Valvoline, Driveworks, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1982 Chevrolet K30 back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1982 Chevrolet K30 Drivetrains
What are the most purchased Drivetrains for the 1982 Chevrolet K30?
Out of 459 Drivetrains for the 1982 Chevrolet K30, the most popular in our inventory are:
What are the top-rated 1982 Chevrolet K30 Drivetrains?
Top-rated Drivetrains for your 1982 Chevrolet K30 based on customer reviews/ratings are:
from
$34.99
(48)
Greaseable Super Strength Universal Joint
“Moog and advanced auto got me out of a bad situation with an amazing part ( u”
from
$36.99
(41)
Greaseable Super Strength Universal Joint
“Easy install and great way to have sting durability with access to grease points”
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
