1982 Chevrolet K10 Truck Beds
More 1982 Chevrolet K10 Truck Beds
Find your specific 1982 Chevrolet K10 original or aftermarket Truck Beds below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1982 Chevrolet K10 Truck Beds
KAI – Truck Cab Corner (Part No.GMK414448673R)
from
$29.99
New Goodmark Passenger Side Inner Cab Corner
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Truck Cab Corner (Part No.RRP110)
from
$8.99
New Standard Replacement Driver Side Cab Corner, Slip-On Type, 2 Door Regular Cab, 4.75 X 16
Product Features:
See More
Product Features:
- Slip-On Type, 2 Door Regular Cab, 4.75 X 16, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Truck Bed Floor (Part No.LKQ1050767)
from
$64.99
New Standard Replacement Driver Or Passenger Side Bed Floor Support, 71.63 X 4.5 X 3.13 Inches
Product Features:
See More
Product Features:
- 71.63 X 4.5 X 3.13 Inches, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Covercraft – Cab Forward Truck Cover (Part No.C13902HG)
from
$744.99
Cab Forward Truck Covers are designed as a quick and easy cover solution to protect your truck’s cab and hood. As the most heavy duty cover material on the market, the WeatherShield HD is built to handle the most intense weather and climates. Toughest of the tough, the WeatherShield HD is constructed from 40% heavier fabric and stronger thread providing double the tear strength, double the tensile strength. Proprietary processes place a specially formulated finish inside the fabric, bonding each individual thread so there is virtually no space between them for water or dirt or pollutants to enter. The WeatherShield HD may not be as silky-smooth as other covers, but it will out perform them in harsh climates! Designed as a long-term storage solution.
Product Features:
See More
Product Features:
- Custom Protection for Front Half of Pickup
- Great for Use with a Camper
- Protects Interior From UV & Reduces Heat Build-up
- Easy to Use
- Cab Forward Covers Available in Multiple Fabrics
Rampage – EasyFit Cab Cover, 4 Layer, Gray, Includes Lock, Cable, Storage Bag, For Use With Standard Cab (Part No.1320)
from
$133.99
Product Features:
See More
- Soft And Durable Diamond Bond Pattern
- Unique 4-Layer Breathable Material
- Ultraviolet Protection Against Sun And Heat
- Polypropylene Layers Repel Water
- Side Grommets For Tie Downs
- Includes Free Locking Cable And Storage Bag
- Indoor And Outdoor Usage
KAI – Bed Panel Patch (Part No.GMK4144690732R)
from
$54.99
New Goodmark Passenger Side Lower Rear Bedside Patch, For Longbed Fleetside Models, 31 Inches L X 12 3/4 Inches H
Product Features:
See More
Product Features:
- For Longbed Fleetside Models 31 Inches Long X 12 3/4 Inches High
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Bed Panel Patch (Part No.GMK4144610731R)
from
$79.99
New Goodmark Passenger Side Lower Front Bedside Patch, For Shortbed Fleetside Models
Product Features:
See More
Product Features:
- For Shortbed Fleetside Models
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Driver Side Truck Cab Floor Rear Support (Part No.RRP139)
from
$12.99
New, Standard Replacement Rear Cab Floor Support, Slip-On Style, Driver Side, 7 3/4 X 15
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Or Modifications Needed For Installation
- Same Form Fit As OE
KAI – Passenger Side Truck Cab Floor Rear Support (Part No.RRP138)
from
$13.99
New, Standard Replacement Rear Cab Floor Support, Slip-On Style, Passenger Side, 7 3/4 X 15 1/2
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Or Modifications Needed For Installation
- Same Form Fit As OE
KAI – Truck Floor Support (Part No.GMK4143731672)
from
$69.99
New Goodmark Pickup Box Floor Support, Fleetside, Steel Floor, Front, Long Cross Sill, Use 1 For Short Wheel Base, 2 For Long Wheel Base
Product Features:
See More
Product Features:
- Fleetside Steel Floor Front Long Cross Sill Use 1 For Short Wheel Base 2 For Long Wheel Base
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Truck Floor Support (Part No.GMK4144731733)
from
$99.99
New Goodmark Bed Cross Sill For Stepside Pickups, 3 Required For Short Bed Models, 5 Required For Long Bed Models
Product Features:
See More
Product Features:
- 3 Required For Short Bed Models 5 Required For Long Bed Models
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Truck Cab Support (Part No.GMK414451773R)
from
$149.99
New Goodmark Passenger Side Cab Floor Brace
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Truck Cab Support (Part No.GMK4142566601)
from
$23.99
New Goodmark Driver Or Passenger Side Front Cab Support
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dee Zee – Mesh, Textured, Black, Aluminum, Used With Cross Bed Tool Box, Curved Design (Part No.DZ95050RTB)
from
$968.99
Even if you secure your cargo properly, it can still happen. Driving on todays hectic roads can lead to extreme stopping situations that could end up sending cargo barreling through your truck cab rear window. With the Dee Zee Cab Rack this is no longer a concern. Made of 100 Percent 2.5 Inch aluminum tubing with a protective textured black powder coating, our cab racks are built to handle as much abuse as you can throw at them. A rear window protection screen consists of either heavy duty ultra-mesh – for your protection and visibility requirements.
Product Features:
See More
Product Features:
- Rugged Protection For Your Trucks Rear Cab Area
- 2.5 Inch Hexagonal Aluminum Tubing For Rugged Construction
- Heavy-Duty Aluminum Ultra Mesh Offers More Visibility And Protection Depending On Your Needs
- Protective Textured Black Powder Coat Finish Keeps Your Rack Looking Fresh
- Integrated Channel System For Easy Addition Of Accessories
- Install Into Existing Stake Pocket Holes
CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum (Part No.114031)
from
$279.99
LD step will give the user easier access to the vehicle due to the wider and deeper stepping surface which extends further than our other steps. The LD step is available in our three durable finishes, and installation is a cinch with our mounting system.
Product Features:
See More
Product Features:
- Easier Entry And Exit From Your Vehicle
- Wide Functional Step Area
- Extends Further Than Our Current Steps
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy For Extreme Longevity
- New Aggressive And Appealing Tread Design For A Non-Slip Surface
- Unique Design That Enhances The Looks Of Current Vehicle Body Styles
- Resists Scratches, Peeling And Fading
- Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Polished, Aluminum (Part No.103992)
from
$141.99
Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
- Strongest And Easy Installation
CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum (Part No.124031)
from
$268.99
The stylish and innovative design of these steps add to a vehicle rugged off road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
- Strongest And Easy Installation
Dee Zee – DogBx (Part No.DZ91782)
from
$309.99
DogBx
Tonno Pro – Tri-Fold Soft Tonneau Cover (Part No.42-111)
from
$357.99
The Tonno Pro TonnoFold Tri-Folding Tonneau Cover has become the fastest growing cover in its class. And for good reason. The hinged together sections make it easy to fold it into a more company unit. You can remove it in seconds when you have oversized cargo or simply fold it forward to lock in place for smaller loads. Our Tri-Fold tonneau cover comes completely assembled – NO DRILLING. This makes installation of your truck topper a snap. Our Tonno Pro Tri-Fold cover is unmatched in quality. It features tear-resistant double sided vinyl, and a 6063 grade powder coated frame. Not only does the Tonno Pro tri-fold provide you the protection and functionality you need, but it does it with our Low Profile Styling that will look great on any truck. Plus it can save you gas and keep your truck looking great for years to come.
Product Features:
See More
Product Features:
- Dual Coated Vinyl
- Won’t Rot Or Mildew
- Water Tite Seals/Carwash Friendly
- No Drill/Easy Installation
- Theft Deterrent
- No Access with Tailgate Lock
- Includes Sure Seal Tailgate Seal, Torch LED Bed Light, Pro Clean 10 oz Spray Vinyl Cleaner, and PVC Truck Work Gloves
Tonno Pro – Tri-Fold Soft Tonneau Cover (Part No.42-110)
from
$357.99
The Tonno Pro TonnoFold Tri-Folding Tonneau Cover has become the fastest growing cover in its class. And for good reason. The hinged together sections make it easy to fold it into a more company unit. You can remove it in seconds when you have oversized cargo or simply fold it forward to lock in place for smaller loads. Our Tri-Fold tonneau cover comes completely assembled – NO DRILLING. This makes installation of your truck topper a snap. Our Tonno Pro Tri-Fold cover is unmatched in quality. It features tear-resistant double sided vinyl, and a 6063 grade powder coated frame. Not only does the Tonno Pro tri-fold provide you the protection and functionality you need, but it does it with our Low Profile Styling that will look great on any truck. Plus it can save you gas and keep your truck looking great for years to come.
Product Features:
See More
Product Features:
- Dual Coated Vinyl
- Won’t Rot Or Mildew
- Water Tite Seals/Carwash Friendly
- No Drill/Easy Installation
- Theft Deterrent
- No Access with Tailgate Lock
- Includes Sure Seal Tailgate Seal, Torch LED Bed Light, Pro Clean 10 oz Spray Vinyl Cleaner, and PVC Truck Work Gloves
Extang – Trifecta (TM) 2.0 tri-fold Tonneau Cover, Black vinyl, 75-87 C10 Series 8 Ft Bed (Part No.92535)
from
$499.99
Extangs Trifecta Tri Fold Tonneau has an easy to use folding design, smooth sleek looks and unmatched durability. This user friendly soft tonneau requires no assembly, no drilling, and installation is as easy as positioning the cover on your truck, tightening the clamps and you’re ready to go. The Hold Tite Straps And Snaps, WeatherTuff Seals, and MaxHinges are all Extang Engineered in order to ensure the best in security and safety.
Product Features:
See More
Product Features:
- Non Lockable
- Heavy Duty Vinyl Helps To Keep Your Cargo Protected From Whatever Weather You Drive Through
- Heavy Duty Luggage Style Hold Tite Fasteners Secure The Tonneau In The Open Position At The Cab, Provides Quick And Easy Storage When Hauling Large Cargo
- Features A Rich Looking All Black Frame, It Has A Perfectly Sewn And Tight Fitting, Double Layered Vinyl With Anti Curl Corners
- Ultra Strong, Rugged, Double Pivot Design. Max Hinges Are Made Of Durable Glass Filled Nylon And Feature Protective Padding
- Rear Tail Section Clamps Operate With Spring Action Handle For Instant Fasten And Release, Clamp Conveniently Stows Away Inside Rail When Not In Use
- Easy To Use Folding Design With Smooth Sleek Looks
- Limited Lifetime Warranty
KAI – Truck Bed Panel (Part No.GMK4145630812)
from
$253.99
New Goodmark Front Pickup Box Panel, Fleetside, Can Use For 73-80
Product Features:
See More
Product Features:
- Fleetside Can Use For 73-80
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Truck Bed Panel (Part No.GMK414482873L)
from
$29.99
New Goodmark Driver Side Tailgate Post Patch, For Fleetside Models
Product Features:
See More
Product Features:
- For Fleetside Models
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Truck Bed Panel (Part No.GMK4143610672R)
from
$34.99
New Goodmark Passenger Side Front Lower Bed Patch, For Fleetside Longbed Models, 41 Inches Long X 14 Inches High
Product Features:
See More
Product Features:
- For Fleetside Longbed Models 41 Inches Long X 14 Inches High
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Truck Bed Panel (Part No.GMK4142630602)
from
$284.99
New Goodmark Front Pickup Box Panel, Front, Fleetside/Wideside
Product Features:
See More
Product Features:
- Front Fleetside/Wideside
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Truck Bed Panel (Part No.GMK4143610672L)
from
$34.99
New Goodmark Driver Side Front Lower Bed Patch, For Fleetside Longbed Models, 41 Inches Long X 14 Inches High
Product Features:
See More
Product Features:
- For Fleetside Longbed Models 41 Inches Long X 14 Inches High
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Popular 1982 Chevrolet K10 Truck Beds Categories
1982 Chevrolet K10 Truck Beds
Maybe you’re in the middle of a full rebuild of that 1982 Chevrolet K10. Maybe you just need a couple of Truck Beds. Either way, Advance Auto Parts has 30 different Truck Beds in our inventory ranging from $8.99 to $968.99. That means you can find the exact parts or products you need to keep that 1982 Chevrolet K10 running smoothly.
Truck Beds are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1982 Chevrolet K10. CARR, KAI, and Rampage are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Truck Beds for your 1982 Chevrolet K10, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Truck Beds to keep your 1982 Chevrolet K10 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Truck Beds Brands To Make Your 1982 Chevrolet K10 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1982 Chevrolet K10 demands trusted brand parts and products to keep it running. Many trusted brands of Truck Beds make up Advance Auto Parts’ inventory, and all are ready to help make your K10 the best it can be. Be sure to browse some of our top Truck Beds brands and parts.
FAQs for 1982 Chevrolet K10 Truck Beds
What are the most purchased Truck Beds for the 1982 Chevrolet K10?
Out of 30 Truck Beds for the 1982 Chevrolet K10, the most popular in our inventory are:
from
$268.99
This product is not rated
Truck Step, Cab Mount; Multi-Fit; Set Of 2; Flat Step; Non-Extendable; Polished Aluminum
Truck Cap Side Steps
from
$268.99
This product is not rated
Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum
Truck Cap Side Steps
