1982 Chevrolet Impala Ignition and Tune-Up Products

Essential 1982 Chevrolet Impala Ignition and Tune-Up Products

MSD Ignition – Distributor Gear; MSD Chevy Distributor; .500 ID; Iron (Part No.8531)

Distributor Gear; MSD Chevy Distributor; .500 ID; Iron

from

$54.39
This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Micro Polished Surface For Smooth Contact
  • Proprietary formulated ductile iron.
  • Melonite QPQ coated reduces friction and initial wear
  • Interstitial carbide improves wear resistance/running properties
See More

DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8007)

Spark Plug Wire Set: Carbon Core, 8 Wire Set

from

$61.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Carquest Premium – Ignition Switch (Part No.CSC1246)

Ignition Switch

from

$30.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

PerTronix – D600701 Cap Red and Rotor 8 cylinder Flame-Thrower Billet Distributor (Part No.D600701)

D600701 Cap Red and Rotor 8 cylinder Flame-Thrower Billet Distributor

from

$44.99
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors. High dielectric strength cap with male or female brass terminals with premium rotor with brass contact.

Product Features:
  • PerTronix D600701 Cap Red and Rotor 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors
See More

MSD Ignition – Wire Set; Super Conductor; Chevy 366-454 with HEI Cap (Part No.35379)

Wire Set; Super Conductor; Chevy 366-454 with HEI Cap

from

$109.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Bolt-on Performance
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
See More

Felpro – DISTRIBUTOR MOUNTING GASKET (Part No.72343)

DISTRIBUTOR MOUNTING GASKET

from

$3.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Carquest Premium – Ignition Switch Connector (Part No.PTA1273)

Ignition Switch Connector

from

$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

MSD Ignition – Vacuum Advance Mechanism (PN 8460/PN 8461) (Part No.8463)

Vacuum Advance Mechanism (PN 8460/PN 8461)

from

$36.49
This is the replacement canister for MSD distributors equipped with vacuum advance (except the PN 8365 and PN 8362 HEI distributors.)

Product Features:
  • Replacement Canister
  • Vacuum Advance Mechanism
  • For Replacement On PN[8460/8461]
  • Size Replacement Canister For Distributor PN[8360/8361]
See More

Accel – High Performance Ignition Module for GM HEI Distributors (Part No.35361)

High Performance Ignition Module for GM HEI Distributors

from

$69.99
This high performance HEI module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most GM HEI for V8 engines with the 4 pin module 1974 thru 1985

Product Features:
  • Fits Most Stock And Modified Distributors
  • Solid State Electronics
  • Dwell Control Circuit
See More

ACDelco – Ignition Distributor Pole Piece Assembly (Part No.D1907X)

Ignition Distributor Pole Piece Assembly

from

$62.99
ACDelco Professional Distributor Ignition Pickup is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket pickup is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

MSD Ignition – Distributor; V8; Late Model GM HEI; External Coil (Part No.8366)

Distributor; V8; Late Model GM HEI; External Coil

from

$463.99
GM late-model performance enthusiasts will be happy to see this Pro-Billet distributor. The distributor, PN 8366, is a drop-in. Replacement for GM V8s using the small cap distributor with a dual connector coil found in cars from 1987-1993 and trucks from 1987 to 1995. The entire housing is CNC-machined to exact tolerances for incredible strength (Not to mention cool looks). For improved lubrication there is an extra oil tract machined into the bottom of the housing that delivers oil directly to the cam and distributor gears. Inside, a polished steel shaft receives guidance from a sealed ball bearing and an extra-long sintered bushing adds stability. This 0.500 In. shaft also receives a QPQ coating for increased friction reduction and corrosion resistance. A factory-style ignition module is supplied with the distributor so your factory wiring will plug directly in triggering this module is the responsibility of a high output magnetic pick-up.

Product Features:
  • Drop-in billet replacement for GM dist. w/small cap/external coil
  • Factory style ignition module accepts factory wiring
  • CNC machined billet aluminum housing and billet aluminum base
  • Maintenance-free magnetic pickup and precision reluctor
  • Oversized steel shaft is QPQ coated
  • Guided by sealed ball bearing and an extra long sintered bushing
  • Special oil tract improves lubrication to the dist./cam gear
  • O-ring seals can be installed for oil press. control (Mods only)
  • Supplied w/Late Model Distributor Cap And Rotor
  • Legal to install in all 50 states
See More

MSD Ignition – Wire Set; Street Fire; Chevy 454; HEI; 74-76 (Part No.5560)

Wire Set; Street Fire; Chevy 454; HEI; 74-76

from

$72.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

ACDelco – Ignition Distributor Cover (Part No.1875960X)

Ignition Distributor Cover

from

$19.49
ACDelco Professional Distributor Cap Cover is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cover is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

ACDelco – Rapidfire Spark Plug (Part No.17)

Rapidfire Spark Plug

from

$7.49
ACDelco Gold (Professional) RAPIDFIRE Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These RAPIDFIRE Single Platinum Performance Spark Plugs are designed for everyday use and are a high quality replacement for many vehicles on the road today. These premium aftermarket spark plugs have high-quality suppressors that help prevent misfiring, an improved plug to boot seal, and a pure copper core for greater durability. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • Solid state suppressor, with two-piece glass and brass seal, can help reduce radio frequency interference, regulates spark energy for long electrode life, and helps protect against high combustion pressures
  • Pure copper core provides great heat transfer and helps maximize plug durability
  • Platinum on center electrode enables superior spark characteristics and can reduce voltage requirements of the ignition system
  • Ribless insulator helps optimize plug to boot sea
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
See More

MSD Ignition – Crank Trigger Kit; Flying Magnet; Big Block Chevy (Part No.8620)

Crank Trigger Kit; Flying Magnet; Big Block Chevy

from

$481.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:
  • Absolutely The Most Accurate Way To Trigger The Ignition
  • The non-magnetic pickup cannot be false triggered.
  • Powerful magnets are embedded in a billet aluminum trigger wheel.
  • Incl. brackets/mounting hardware to fit a variety of engines
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA1162)

Ignition Coil Connector

from

$22.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Radio Capacitor (Part No.GAA1085)

Radio Capacitor

from

$18.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Coil Ground Strap (Part No.DLA1034)

Ignition Coil Ground Strap

from

$4.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Designed to meet or exceed OE specifications in form, fit and function
  • Attaching hardware provided (where applicable)
See More

Carquest – Distributor Rotor (Part No.D157)

Distributor Rotor

from

$13.05
BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:
  • High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
  • The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze.  The housing is fabricated using polyamide resins.  All of the materials together provide the connectors with prolonged life and superior performance.
  • All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
  • Offering thousands of high-quality pigtails & sockets for nearly every electrical job
  • Noise-suppressing coating on segment prevents electrical interference with radio and other electronic circuits
See More

Accel – 8.8Mm Spiral Universal Fit (Part No.8033)

8.8Mm Spiral Universal Fit

from

$153.99
These ACCEL 8.8mm wires feature a carbon/graphite core that virtually eliminate RFI noise while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • Custom-fit Universal And Import Coverage
  • Pre And Post HEI Vehicles
  • Magnetic Suppression
  • Fiberglass/Kevlar Core
  • 500 Ohms Resistance
See More

Dorman – Help – Rack And Sector Gear Kit – Without Tilt Or Tilt Telescopic Wheel (Part No.83221)

Rack And Sector Gear Kit - Without Tilt Or Tilt Telescopic Wheel

from

$11.99
This rack and sector gear kit is designed to match the original components required to repair the steering column gear on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this rack and sector gear kit is designed to match the original components required to repair the steering column gear on specified vehicles
  • Ideal solution – this kit is a reliable replacement for original components that are damaged or have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Distributor Cap Carbon Button (Part No.CAA1216)

Distributor Cap Carbon Button

from

$9.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Autolite – Diesel Engine Glow Plug: High Intensity Concentrated Heat, Reliable Starts (Part No.1109)

Diesel Engine  Glow Plug: High Intensity Concentrated Heat, Reliable Starts

from

$9.79
Starting a diesel engine? Check out Autolite glow plugs. They’re dependable and long-lasting, the perfect plug for a variety of diesel applications.

Product Features:
  • Diesel engines depend on high heat in the combustion chamber to ignite the fuel. When you cold start a diesel engine, there isn’t enough heat to ignite. Glow plug warms the combustion chamber to start the fuel ignition.
  • These glow plugs fit a variety of diesel applications. If you’re experiencing problems starting your diesel engine, it may have burnt out glow plugs.
  • Reaches temperatures hot enough to start in 30 seconds or less
  • For dependability and long-lasting performance, use Autolite glow plugs
See More

MSD Ignition – High Energy Ignition Coil for GM HEI Distributors (Part No.8225)

High Energy Ignition Coil for GM HEI Distributors

from

$112.99
HEI owners now have a choice to replace their stock coil with the MSD high energy unitized coil for GM HEI distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI module, PN 83645. The coil features special low induc?tance, high temperature windings which charge faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.

Product Features:
  • Direct performance replacement for GM HEI coil-in-cap dist.
  • 70:1 Turns Ratio
  • Lower Primary Resistance Produces High Voltage Output
  • Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module
See More

MSD Ignition – Wire Set; Super Conductor; Small Block Chevy; Socket Distributor Cap (Part No.31659)

Wire Set; Super Conductor; Small Block Chevy; Socket Distributor Cap

from

$181.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
  • Bolt-on Performance
See More

Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)

Spark Plug Non-Foulers - 14mm Gasket Seat Long Reach

from

$9.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
  • Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
  • Durable construction – made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

MSD Ignition – Wire Set; Black Super Conductor; 8-cyl. Multi-Angle; Universal (Part No.31193)

Wire Set; Black Super Conductor; 8-cyl. Multi-Angle; Universal

from

$129.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. Multi-angle boots and terminals factory installed on one end.

Product Features:
  • Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
  • Incl. both socket-style and spark plug-style boots and terminals
  • Includes Mini-Stripper-Crimper For Factory Style Crimps
  • Size Includes: [2]48/50/56 in./[3] 32 in. Wires/Boots/Terminals
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

Carquest Premium – Ignition Conversion Kit (Part No.CBA1755)

Ignition Conversion Kit

from

$452.99
Ignition Conversion Kit

1982 Chevrolet Impala Ignition and Tune-Up Products

You count on your 1982 Chevrolet Impala to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 178 Ignition and Tune-Up Products ranging in price from $2.29 to $499.99, you’re sure to find everything you need for your 1982 Chevrolet Impala.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 20 different brands like ACDelco, NGK, and E3. 1982 Chevrolet Impala Ignition and Tune-Up Products start as low as $2.29!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 2,707 extensive product reviews on 1982 Chevrolet Impala Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Distributor Cap and Rotor; GM HEI Distributor; Red with 4.4 stars and High-Performance Shorty Spark Plugs for Header Clearance with 4.9 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1982 Chevrolet Impala below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 1982 Chevrolet Impala

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1982 Chevrolet Impala running right for years to come. In our inventory you’ll find brands like ACDelco, NGK, E3, and even more.

Popular Champion Ignition and Tune-Up Products

You’ll find popular Champion brand products across Spark Plugs. All are waiting to get your 1982 Chevrolet Impala back on the road. Some of the top-rated Champion products in these categories are:

Top-Rated Ignition and Tune-Up Products


If are what you’re looking for, our inventory holds plenty. We stock brand Ignition and Tune-Up Products for your 1982 Chevrolet Impala, and some of our most reviewed parts include:

FAQs for 1982 Chevrolet Impala Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 1982 Chevrolet Impala?

Out of 178 Ignition and Tune-Up Products for the 1982 Chevrolet Impala, the most popular in our inventory are:

What are the top-rated 1982 Chevrolet Impala Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 1982 Chevrolet Impala based on customer reviews/ratings are:
Distributor Cap and Rotor; GM HEI Distributor; Red
from $46.09
(49)
Distributor Cap and Rotor; GM HEI Distributor; Red
“works great on my dirt car”
High-Performance Shorty Spark Plugs for Header Clearance
from $52.99
(36)
High-Performance Shorty Spark Plugs for Header Clearance
“Perfect great plugs for my Build. Great service to THANK YOU!”
Ignition Switch
from $32.49
(25)
Ignition Switch
“1991 Dodge d250”