1982 Chevrolet G30 Differentials

Essential 1982 Chevrolet G30 Differentials

Yukon Gear – 1541H Alloy 8 Lug Rear Axle For ’83-’95 GM 9.5" G30 (Part No.21250)

1541H Alloy 8 Lug Rear Axle For '83-'95 GM 9.5" G30

from

$435.99
Yukon 1541H alloy 8 lug rear axle for ’83-’95 GM 9.5″ G30 with a length of 35-5/16″ inches and 33 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.

Product Features:
  • 33 spline
  • 8 lug
  • 35 5/16″ long
  • Fits GM 9.5″ in G30 van
See More

Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)

Drive Shaft Pinion Yoke

from

$117.99


Product Features:
  • PINION YOKE
  • CAST:1310
  • U-BOLT STYLE
See More

Yukon Gear – Minor Install Kit For Dana 80 Differential (4.125" O.D – Pinion Race) (Part No.12030)

Minor Install Kit For Dana 80 Differential (4.125" O.D - Pinion Race)

from

$188.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
  • Included are a pinion seal, complete shim kit, marking compound and brush.
See More

Yukon Gear – Zip Locker Install Kit (Part No.34026)

Zip Locker Install Kit

from

$249.99
Product Features:
  • Installation kit
  • Includes o-ring for bulkhead fitting, bulkhead fitting, outer fitting, switch, front and rear switch cover, solenoid, zip ties and 20′ air line
See More

Yukon Gear – Master Overhaul Kit For GM ’89-’97/’98 14T Differential (Part No.14071)

Master Overhaul Kit For GM '89-'97/'98 14T Differential

from

$544.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. This kit does not include ring gear bolts.

Product Features:
  • Fits 1989-1997 GM 10.5″ 14 bolt truck
  • Included are Timken bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
See More

Powertrax – No-Slip Traction System (Part No.9207053000)

No-Slip Traction System

from

$591.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    National – Bearings (Part No.HM804810)

    Bearings

    from

    $28.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.R-1581-TV)

    Bearings

    from

    $44.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • High radial load capacity makes them suitable for high speed applications
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    USA Standard Gear – Replacement Ring & Pinion Gear Set For Dana 80 In A 4.30 Ratio (Part No.36096)

    Replacement Ring & Pinion Gear Set For Dana 80 In A 4.30 Ratio

    from

    $379.99
    USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

    Product Features:
    • Fits Dana Spicer 80
    • 11.25″ ring gear diameter
    • 37 spline pinion
    • 12 ring gear bolts
    • 4.30 ratio
    See More

    Yukon Gear – 10.5" GM 14 Bolt Truck Ring Gear Bolt (Part No.33051)

    10.5" GM 14 Bolt Truck Ring Gear Bolt

    from

    $10.99
    14T ring gear bolt 4.11 & down. 9/16″ x 18. 2.085″ overall length.

    Product Features:
    • Ring gear bolt for GM 10.5″ 14 bolt truck
    • 4.11 and down ratio
    • 1/2″ x 18 thread
    • 2.085″ overall length
    See More

    Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

    Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

    from

    $13.99
    Product Features:
    • Cover gasket
    • Fits Dana Spicer 60, 70, 70U and 70HD
    See More

    Yukon Gear – Eaton Positraction Shim Kit For 10.5" GM 14 Bolt Truck (Part No.16113)

    Eaton Positraction Shim Kit For 10.5" GM 14 Bolt Truck

    from

    $78.99
    Eaton positraction shim kit for GM 14T.

    Product Features:
    • Shim kit
    • Fits GM 10.5″ 14 bolt truck Eaton positraction
    See More

    Yukon Gear – Pinion Depth Shims For 10.5" GM 14 Bolt Truck (Part No.55058)

    Pinion Depth Shims For 10.5" GM 14 Bolt Truck

    from

    $37.99
    14T GM pinion shim kit.

    Product Features:
    • Pinion depth shims for GM 10.5″ 14 bolt truck
    See More

    Spicer – Differential Carrier Gear Kit (Part No.707063X)

    Differential Carrier Gear Kit

    from

    $315.99
    Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non genuine parts simply cannot deliver.
    See More

    Yukon Gear – 14T Side Gear Thrust Washer (Part No.33383)

    14T Side Gear Thrust Washer

    from

    $7.99
    14T side gear Thrust washer.

    Product Features:
    • Side gear thrust washer
    • Fits GM 10.5″ 14 bolt truck
    See More

    Yukon Gear – 10.5" GM 14 Bolt Truck Pinion Nut (Part No.33148)

    10.5" GM 14 Bolt Truck Pinion Nut

    from

    $48.99
    10.5″ GM 14 bolt truck pinion nut. 1 1/2″ socket, 15/16″ x 16 thread.

    Product Features:
    • Pinion nut for GM 10.5″ 14 bolt truck
    • 15/16″ x 16 thread
    • 1.5″ socket
    See More

    Yukon Gear – Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc (Part No.33287)

    Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc

    from

    $5.99
    Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75″ Chrysler STD) Dana 70 2PC.

    Product Features:
    • Pinion gear thrust washer for Dana Spicer 60
    • Fits standard open and Trac Loc applications
    See More

    Yukon Gear – Bearing Race Driver (Part No.56018)

    Bearing Race Driver

    from

    $215.99
    Bearing race driver. No return.

    Product Features:
    • Bearing race driver
    • Fits HM903210 race
    • All steel construction
    See More

    Motive Gear – Differential Carrier (Part No.6258340)

    Differential Carrier

    from

    $205.99


    Product Features:
    • GM10.5″ 14 BOLT OPEN EMPTY CASE 4:56 & UP
    See More

    National – Bearings (Part No.HM803110)

    Bearings

    from

    $22.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Standard Open And Gov-Loc Cross Pin For 9.5" GM (Part No.33402)

    Standard Open And Gov-Loc Cross Pin For 9.5" GM

    from

    $32.99
    Standard open and Gov-Loc cross pin for 9.5″ GM.

    Product Features:
    • Cross pin shaft
    • Fits GM 9.5″
    See More

    Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)

    Seal Housing For Dana 60, Zip Locker, With O-Rings

    from

    $79.99
    Seal housing for Dana 60, Zip locker, with o-rings.

    Product Features:
    • Seal housing for Dana Spicer 60
    • Includes o-rings
    See More

    Yukon Gear – Pinion Nut Washer (Part No.33167)

    Pinion Nut Washer

    from

    $14.99
    Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

    Product Features:
    • Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.
    See More

    Yukon Gear – Pinion Seal For GM 14T (Part No.30023)

    Pinion Seal For GM 14T

    from

    $19.99
    Pinion seal for GM 14T.Yukon Mighty seal.

    Product Features:
    • Pinion seal
    • Fits 1998 and down GM 10.5″ 14 bolt truck
    See More

    Yukon Gear – DiffrlPinSupportBolt (Part No.33582)

    DiffrlPinSupportBolt

    from

    $5.99
    DiffrlPinSupportBolt

    Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

    Dana 60, Dana 70 & Dana 80 Cover Bolt

    from

    $5.99
    3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

    Product Features:
    • Cover bolt for Dana Spicer 60, 70 and 80
    • 3/8″
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 55063)

    Differential Cover Gasket

    from

    $6.79
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Yukon Gear – Steel Spool For Dana 80 With 35 Spline Axles, 4.10 & Up (Part No.32172)

    Steel Spool For Dana 80 With 35 Spline Axles, 4.10 & Up

    from

    $747.99
    Yukon Performance steel spool for 8Dana 80 with 35 spline axles, 4.10 & up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Chrysler Dana Spicer 80 with 35 spline axles
    • 4.10 and up ratio only
    • Provides 100% traction to both wheels at all times
    • Not recommended for street driven vehicles
    See More

    Popular 1982 Chevrolet G30 Differentials Categories

    1982 Chevrolet G30 Differentials

    Maybe you’re in the middle of a full rebuild of that 1982 Chevrolet G30. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 312 different Differentials in our inventory ranging from $1.89 to $1,487.99. That means you can find the exact parts or products you need to keep that 1982 Chevrolet G30 running smoothly.

    Differentials are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1982 Chevrolet G30. Valvoline, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1982 Chevrolet G30, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,305 reviews in this category, some of the top rated parts include DIFFERENTIAL GASKET with 3.0 stars and Differential Carrier Gear Kit with 3.7 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1982 Chevrolet G30 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1982 Chevrolet G30 Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1982 Chevrolet G30 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your G30 the best it can be. Be sure to browse some of our top Differentials brands and parts.

    FAQs for 1982 Chevrolet G30 Differentials

    What are the most purchased Differentials for the 1982 Chevrolet G30?

    Out of 312 Differentials for the 1982 Chevrolet G30, the most popular in our inventory are:
    3 Qt - Penzoil 80W90 Conventional Gear Oil
    from $44.99
    This product is not rated
    3 Qt – Penzoil 80W90 Conventional Gear Oil
    Differential Oil
    Taper Bearing Cone
    from $17.99
    (2)
    Taper Bearing Cone
    Differential Bearings
    Bearings
    from $22.99
    (3)
    Bearings
    Differential Bearings

    What are the top-rated 1982 Chevrolet G30 Differentials?

    Top-rated Differentials for your 1982 Chevrolet G30 based on customer reviews/ratings are:
    DIFFERENTIAL GASKET
    from $8.29
    (4)
    DIFFERENTIAL GASKET
    “Great Product”
    Differential Carrier Gear Kit
    from $176.99
    (3)
    Differential Carrier Gear Kit
    “worked perfect great quality”
    Differential Cover Gasket
    from $15.99
    (1)
    Differential Cover Gasket
    “OEM only uses silicone , the gasket set with a thin layer of silicone is a much better sealant method”