1982 Chevrolet G20 Differentials

Essential 1982 Chevrolet G20 Differentials

Yukon Gear – Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5" (Part No.16112)

Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5"

from

$304.99
Yukon 1480 Lifetime Series U/Joint. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.

Product Features:
  • Clutch kit
  • Fits GM 10.5″ 14 bolt truck with Eaton positraction
  • Carbon fiber clutches
See More

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Motive Gear – Differential Pinion Seal (Part No.8460N)

Differential Pinion Seal

from

$8.29
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

USA Standard Gear – Axle Shaft For 2WD 12 Bolt Truck & 8.5" Van Rear (Part No.35055)

Axle Shaft For 2WD 12 Bolt Truck & 8.5" Van Rear

from

$188.99
USA Standard axle shaft for 2WD 12 bolt truck & 8.5″ van rear. 33 3/8″ long, 30 spline, 5 lug.

Product Features:
  • Fits GM 12 bolt truck with 2 wheel drive and van
  • 30 spline
  • 33 3/8″ long
  • 5 lug
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Differential Pinion Shim Kit

from

$7.49
High-quality Differential Component Shim

Product Features:
  • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
See More

Motive Gear – Differential Ring Gear Bolt (Part No.14012703)

Differential Ring Gear Bolt

from

$11.39
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

Yukon Gear – Standard Open Carrier Case, GM 8.5", 2.73 & Up (Part No.20083)

Standard Open Carrier Case, GM 8.5", 2.73 & Up

from

$239.99
8.5″ GM standard Open case, 2.73 & up, 28 or 30 spline.

Product Features:
  • Standard open carrier case
  • Fits GM 8.5″ with 28 or 30 spline axles
  • 2.73 and up ratio only
  • Does not include spider gears
See More

Pro-King – Differential Cover Plug (Part No.742G484)

Differential Cover Plug

from

$6.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Powertrax – No-Slip Traction System (Part No.9207053000)

No-Slip Traction System

from

$591.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Minor Install Kit For ’87 & Down 10.5" GM 14 Bolt Truck Differential (Part No.12045)

    Minor Install Kit For '87 & Down 10.5" GM 14 Bolt Truck Differential

    from

    $108.99
    Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

    Product Features:
    • Fits 1988 and down GM 10.5″ 14 bolt truck
    • Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
    See More

    Yukon Gear – GM 10.5′ 14 Bolt Truck Cover Gasket (Part No.23016)

    GM 10.5' 14 Bolt Truck Cover Gasket

    from

    $13.99
    14T cover gasket.

    Product Features:
    • Cover gasket
    • Fits GM 10.5″ 14 bolt truck
    See More

    Yukon Gear – Differential Carrier (Part No.57015)

    Differential Carrier

    from

    $251.99
    Differential Carrier

    Powertrax – Grip LS Traction System (Part No.LS231230)

    Grip LS Traction System

    from

    $480.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    Richmond Gear – RngPnnInstlKt (Part No.83-1034-B)

    RngPnnInstlKt

    from

    $59.99
    RngPnnInstlKt

    Motive Gear – Differential Bearing Kit – Koyo (Part No.R14R)

    Differential Bearing Kit - Koyo

    from

    $144.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • GM 10.5 KIT BRG & SEAL 14BLT ’72-88
    See More

    Yukon Gear – Standard Open Side Gear Thrust Washer For 8.5" GM (Part No.33304)

    Standard Open Side Gear Thrust Washer For 8.5" GM

    from

    $15.99
    Standard open side gear thrust washer for 8.5″ GM.

    Product Features:
    • Side gear thrust washer
    • Fits GM 8.5″
    See More

    Yukon Gear – The Carrier Bearing Puller (Part No.56034)

    The Carrier Bearing Puller

    from

    $689.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
    See More

    Yukon Gear – Super Carrier Shim Kit For GM 9.5" (Part No.55003)

    Super Carrier Shim Kit For GM 9.5"

    from

    $29.99
    9.5″ GM differential carrier Supershim kit.

    Product Features:
    • Super carrier shim kit for GM 9.5″
    • Interlocking design makes installation much easier
    See More

    Pro-King – Differential Cross Shaft (Part No.742G673)

    Differential Cross Shaft

    from

    $28.49
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – Pinion Nut (Part No.33152)

    Pinion Nut

    from

    $9.99
    Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.

    Product Features:
    • Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
    • 7/8″ x 14 thread
    • 1 1/4″ socket
    See More

    Yukon Gear – Pinion Install Kit For GM 8.5" Differential (Part No.13069)

    Pinion Install Kit For GM 8.5" Differential

    from

    $173.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits GM 8.5″ rear
    • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
    See More

    Yukon Gear – 10.5" GM 14 Bolt Truck Crush Sleeve (Part No.33100)

    10.5" GM 14 Bolt Truck Crush Sleeve

    from

    $12.99
    10.5″ GM 14 bolt truck crush sleeve, 1989 & newer. Approx 0.920″ long.

    Product Features:
    • Crush sleeve for 1989 and up GM 10.5″ 14 bolt truck
    • 0.920″ tall
    See More

    National – Shaft Repair Sleeve (Part No.99193)

    Shaft Repair Sleeve

    from

    $43.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Yukon Gear – Standard Open And Gov-Loc Cross Pin For 9.5" GM (Part No.33402)

    Standard Open And Gov-Loc Cross Pin For 9.5" GM

    from

    $32.99
    Standard open and Gov-Loc cross pin for 9.5″ GM.

    Product Features:
    • Cross pin shaft
    • Fits GM 9.5″
    See More

    Yukon Gear – Bearing Race Driver (Part No.56011)

    Bearing Race Driver

    from

    $215.99
    Bearing race driver for Dana 60 front, Dana 70U rear, Chrysler 8.75″ with 42 housing, and ’88 and older GM 14T. No return.

    Product Features:
    • Bearing race driver
    • Fits HM803110 race
    • All steel construction
    See More

    Dorman – Differential Pinion Yoke Assembly (Part No.697-537)

    Differential Pinion Yoke Assembly

    from

    $289.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    FAG US – CUP (Part No.LM67010)

    CUP

    from

    $6.69
    CUP

    Yukon Gear – Pinion Nut Washer (Part No.33167)

    Pinion Nut Washer

    from

    $14.99
    Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

    Product Features:
    • Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.
    See More

    1982 Chevrolet G20 Differentials

    Maybe you’re in the middle of a full rebuild of that 1982 Chevrolet G20. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 291 different Differentials in our inventory ranging from $1.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1982 Chevrolet G20 running smoothly.

    Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1982 Chevrolet G20. Valvoline, FELPRO, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1982 Chevrolet G20, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,792 reviews in this category, some of the top rated parts include Differential Shaft Lock Bolt with 4.0 stars and Bearings with 3.9 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1982 Chevrolet G20 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1982 Chevrolet G20 Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1982 Chevrolet G20 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your G20 the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Driveworks Differentials

    We carry Driveworks parts in our stock across Differential Pinion Seals categories, plus more. For a 1982 Chevrolet G20, our most popular Driveworks Differentials include:
    Oil Seal
    from $7.79
    (1)
    Oil Seal
    Differential Pinion Seals

    Top 1982 Chevrolet G20 Differentials from Felpro

    Felpro products are another trusted brand when it comes to Differentials for your 1982 Chevrolet G20. Popular Felpro parts include:
    Differential Cover Gasket
    from $9.99
    (195)
    Differential Cover Gasket
    Rear Differential Cover Gaskets

    FAQs for 1982 Chevrolet G20 Differentials

    What are the most purchased Differentials for the 1982 Chevrolet G20?

    Out of 291 Differentials for the 1982 Chevrolet G20, the most popular in our inventory are:
    DEX/MERC Automatic Transmission Fluid, 1 Gallon
    from $35.99
    (17)
    DEX/MERC Automatic Transmission Fluid, 1 Gallon
    Differential Oil
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil

    What are the top-rated 1982 Chevrolet G20 Differentials?

    Top-rated Differentials for your 1982 Chevrolet G20 based on customer reviews/ratings are:
    Differential Shaft Lock Bolt
    from $5.99
    (11)
    Differential Shaft Lock Bolt
    “great”
    Bearings
    from $23.99
    (7)
    Bearings
    “Good price”
    Differential Master Bearing Kit - Koyo
    from $156.99
    (5)
    Differential Master Bearing Kit – Koyo
    “was delivered as promised and on time”