1982 Chevrolet C30 Fuel and Emissions Systems
More 1982 Chevrolet C30 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1982 Chevrolet C30, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1982 Chevrolet C30 Fuel and Emissions Systems
Carquest Premium – Oxygen Sensor Connector (Part No.PTA3163)
from
$40.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-814)
from
$24.49
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.
Product Features:
See More
Product Features:
- Cover Hole In Block When Mech. Fuel Pump Is Removed
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dorman – Help – Air Check Valve (Part No.55050)
from
$8.49
The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants. Our A.I.R Check Valve is made to withstand the heat of the exhaust manifold.
Product Features:
See More
Product Features:
- Emissions, A.I.R Check Valves – 1994-64 AMC, GM, Chrysler, Fiat, Isuzu, Jaguar, Jeep, MG, Nissan,VW
- Air Check Valve
- The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants. Our A.I.R Check Valve is made to withstand the heat of the exhaust manifold.
- Include gaskets and mounting hardware for a complete repair
- Direct replacement for a proper fit every time
Cardone – Smog Air Pump (Part No.32-256)
from
$173.99
CARDONE Remanufactured Smog Pumps are engineered for quick installation and no comebacks. These pumps come with all necessary components for easy installation, while other brands leave out integral components, such as inlets and outlets that commonly break during installation. CARDONE engineers pay special attention to proper vane size and shape on each application to maintain proper flow, while other brands consolidate vane sizes for their own convenience.
Product Features:
See More
Product Features:
- 100% testing of all units guarantees reliable performance every time
- High temperature grease extends bearing life, resulting in longer pump life
- New carbon shoes/vanes on every unit ensure accurate air output to meet today’s stringent emissions standards
- Guaranteed fit and function
- Meets or exceeds O.E.M performance
ACDelco – Fuel Tank Selector Valve (Part No.U7001)
from
$152.99
GM Genuine Parts Fuel Tank Selector Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Cardone – Fuel Injection Pump (Part No.2H-106)
from
$952.99
CARDONE Remanufactured Fuel Injection Pumps are application specific pumps that expand across a variety of platforms. Our diesel injector pumps are precision wound with trimmed solenoid windings to ensure accurate and precise delivery of fuel from the electronic control module (ECU). This allows for smooth engine operation, improved fuel consumption, reduced harmful emissions, instant throttle response, and optimal fuel atomization, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
- Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
- All components are renewed or replaced as necessary to ensure high quality and durability
- When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
ARP Auto Racing – Chrome Moly (Part No.134-8701)
from
$22.79
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you
Product Features:
See More
Product Features:
- Made From Premium Grade Aerospace Chrome Moly
- Center Less Ground To Precise Diameter
- Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
- Provide With Required Reliability And Improved Performance
Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD11013)
from
$77.99
CARQUEST precision remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested to meet or exceed OE performance specifications.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Includes copper combustion seal
GM Genuine Parts – Air Injection Valve (Part No.214-1045)
from
$177.99
GM Genuine Parts Secondary Air Injection Check Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These valves help prevent exhaust gases from flowing back through the air injection system. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps prevent exhaust from entering air pump
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
KAI – Fuel Tank Strap (Part No.TNKST01)
from
$38.99
New Standard Replacement Fuel Tank Strap Kit, 23 1/4 Inch And 24 Inch Straps, Pair
Product Features:
See More
Product Features:
- 23 1/4 Inch And 24 Inch Straps
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
Carquest Premium – Ported Vacuum Switch (Part No.ECA1248)
from
$54.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.71098)
from
$5.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)
from
$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Dorman – Help – Vacuum Storage Canister (Part No.47076)
from
$24.99
This vacuum reservoir is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this vacuum reservoir is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this reservoir is a reliable replacement for an original part that is missing or damaged
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – Fuel Pump Mounting Gasket (Part No.70150)
from
$2.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)
from
$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Fuel Sending Unit Retainer Assortment (Part No.E3004425897DOR)
from
$16.16
Recommended for replacement whenever the sending unit is serviced, Dorman’s Fuel Tank Sending Unit Lock Ring securely retains the fuel pump assembly to the lock. Its heavy-duty steel or plastic construction ensures a long life.
Product Features:
See More
Product Features:
- Comes with rubber seal or gasket
- Direct replacement for a proper fit every time
- Corrosion-resistant
- Quality-tested for trouble-free performance
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Carquest Premium – Fuel Tank Lock Ring (Part No.LR3000)
from
$9.99
CARQUEST lock rings are designed to positively seat the fuel pump in proper position inside the tank. These precision stamped rings are made from corrosion-resistant and durable metals for long life.
Product Features:
See More
Product Features:
- Precision stamped for perfect fit and pump position
- Always replace lock ring as a part of fuel pump service
Carquest Premium – Mechanical Fuel Pump 260573: Includes Gasket (Part No.260573)
from
$28.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Carquest Premium – Fuel Tank Selector Valve Connector (Part No.FSA1013)
from
$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Fuel Tank Selector Switch (Part No.S743)
from
$24.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Our parts are 100% tested to verify both mechanical and electrical switching performance.
- Decades of industry leading research and development focused on meeting the technician’s needs
- Robust design and high grade materials meet the stringent demands of today’s service professional
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)
from
$12.29
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Properly Aligned
- Conventional Hex Heads
- Rust-Proof Stainless Bolts
- 170,000 PSI
Delphi – Diesel Fuel Injector Installation Kit (Part No.7135-274)
from
$37.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
KAI – Fuel Tank Bracket (Part No.FST019997)
from
$129.99
New Platinum Pro Front Fuel Tank Bracket, With Strap, Made Of Steel
Product Features:
See More
Product Features:
- With Strap
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Spectra Premium – Fuel Tank (Part No.GM49A)
from
$328.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Lock ring included with each tank to reduce installation time and to ensure a complete repair
- Made with corrosion resistant, OE approved, Ni Terne steel for durability
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
Popular 1982 Chevrolet C30 Fuel and Emissions Systems Categories
1982 Chevrolet C30 Fuel and Emissions Systems
You count on your 1982 Chevrolet C30 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 113 Fuel and Emissions Systems ranging in price from $1.29 to $638.99, you’re sure to find everything you need for your 1982 Chevrolet C30.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 18 different brands like Carquest Premium, Motorad, and Felpro. 1982 Chevrolet C30 Fuel and Emissions Systems start as low as $1.29!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 1,985 extensive product reviews on 1982 Chevrolet C30 Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Electric Fuel Pump with 2.5 stars and Locking Fuel Cap with 4.3 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1982 Chevrolet C30 below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1982 Chevrolet C30
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1982 Chevrolet C30 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Motorad, Felpro, and even more.
Popular Dorman – Help Fuel and Emissions Systems
You’ll find popular Dorman – Help brand products across Vacuum Pumps. All are waiting to get your 1982 Chevrolet C30 back on the road. Some of the top-rated Dorman – Help products in these categories are:
Top-Rated Carquest Premium Fuel and Emissions Systems
If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 1982 Chevrolet C30, and some of our most reviewed Carquest Premium parts include:
from
$21.79
(50)
Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
Gas Caps
FAQs for 1982 Chevrolet C30 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1982 Chevrolet C30?
Out of 113 Fuel and Emissions Systems for the 1982 Chevrolet C30, the most popular in our inventory are:
from
$23.99
This product is not rated
Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack
Gas Caps
What are the top-rated 1982 Chevrolet C30 Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1982 Chevrolet C30 based on customer reviews/ratings are:
from
$23.99
(35)
Locking Fuel Cap
“Had a check engine light and when I scanned it, calls for a new gas cap. Instead of buying oem from the dealer or just an ordinary gas cap from a part”
from
$24.99
(32)
Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“Lost old gas cap and replaced with this one, which comes with a lock (which you don’t have to use,FYI)”
