from

$67.99

Chrome cover for AMC Model 20.

Product Features:

Fits AMC Model 20
Chrome

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$5.99

Product Features:

Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
0.030″ thick

from

$3.99

Replacement ring gear bolt for Model 20, Grand Cherokee 35, “Super” Dana 30 & Dana 50. 7/16″ x 20.

Product Features:

Ring gear bolt for AMC Model 20, “Super” 35, Dana Spicer “Super” 30 and Dana Spicer 50
7/16″ 20 thread

from

$6.49

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$11.99

Model 35 cover gasket.

Product Features:

Cover gasket
Fits AMC Model 35

from

$9.99

Pinion seal for Model 20 and Model 35.Yukon Mighty seal.

Product Features:

Pinion seal
Fits AMC Model 20 and AMC Model 35

from

$26.99

Spartan spring & pin kit, fits smaller designs.

Product Features:

Replacement spring and pin kit for Spartan Locker
Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
Includes 4 springs and 4 alignment pins

from

$172.99

USA Standard Gear standard spider gear set for AMC Model 35 with 1.560″ side gear bore. (used in ’94 and newer models).

Product Features:

Fits AMC Model 35 with open differential and 1.560″ side gear bore
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$275.99

Yukon standard open spider gear kit for Model 35 with 27 spline axles. hubs have 1.625″ diameter (used in ’93 and older models). Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fits AMC Model 35 open differential with 1.620″ side gear bore
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$52.79

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$52.99

Model 35 Spartan locker cross pin, double drilled for roll pin or cross pin bolt designs.

Product Features:

USA Standard Gear heavy-duty cross pin shaft
Fits AMC Model 35
Works with Spartan Locker or standard open spider gears

from

$277.99

USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:

Fits AMC Model 20
8.875″ ring gear diameter
28 spline pinion
8 ring gear bolts
4.11 ratio

from

$8.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$359.99

The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$27.99

Product Features:

Bulkhead fitting

from

$101.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

DANA 35 JEEP 1980-06 MASTER BRG KIT ’97 UP DANA 35 DODGE DAKOTA FRONT

from

$119.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:

Fits AMC Model 20
Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

from

$27.99

8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:

Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″

from

$9.99

5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:

Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
1/2″ head

from

$259.99

Yukon replacement trail repair kit for AMC Model 20 with 1310 size U/joint and u-bolts. This kit comes with a yoke, U/joint, pinion seal, U/bolt kit, pinion nut, and pinion nut washer (if applicable).

Product Features:

Fits AMC Model 20
1310 u-joint size
Kit includes yoke, U-joint, pinion seal, pinion nut and washer, U-bolts and threadlocker

from

$175.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits AMC Model 20
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$2.89

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$619.99

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:

Fits AMC Model 35 with 27 spline axles and 1.620″ side gear bore
Made from 9310 steel for added strength
Replaces the spiders in a standard carrier case

from

$5.99

Model 35 roll pin for cross pin shaft, 0.190″ DIA.

Product Features:

Roll pin
Fits AMC Model 35

from

$16.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$289.99

Model 35 3.55 & up + 3.27, standard Open case, BLT, 1.560″ side gear hub BORE, 1-5/8″ tall.

Product Features:

Standard open carrier case
Fits AMC Model 35
3.54 ratio and up only
Does not include spider gears
1.560″ side gear bore

from

$4.99

Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.

Product Features:

Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″

1982 AMC Concord Differentials

More 1982 AMC Concord Differentials

Essential 1982 AMC Concord Differentials

Yukon Gear – Chrome Cover For Amc Model 20 (Part No.32019)

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

Yukon Gear – Replacement Ring Gear Bolt For Model 20, Grand Cherokee 35, "Super" Dana 30 & Dana 50 – 7/16" X 20 (Part No.33040)

Motive Gear – Differential Pinion Nut (Part No.379570S)

Yukon Gear – Model 35 Cover Gasket (Part No.23026)

Yukon Gear – Pinion Seal For Model 20 And Model 35 (Part No.30079)

USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)

USA Standard Gear – Standard Spider Gear Set For Amc Model 35 With 1.560" Side Gear Bore (Part No.39030)

Yukon Gear – Standard Open Spider Gear Kit For Model 35 With 27 Spline Axles – Hubs Have 1.625" Diameter (Part No.16129)

Motive Gear – Differential Gear Install Kit (Part No.AM20IK)

USA Standard Gear – Model 35 Spartan Locker Cross Pin, Double Drilled For Roll Pin Or Cross Pin Bolt Designs (Part No.17026)

USA Standard Gear – Ring & Pinion Gear Set For Model 20 In A 4.11 Ratio (Part No.36230)

Driveworks – Taper Bearing Cone (Part No.S-M-86649)

Powertrax – Lock Right Locker (Part No.2310-LR)

Yukon Gear – Zip Locker Bulkhead Fitting (Part No.34001)

Motive Gear – Differential Bearing Kit – Koyo (Part No.R35JR)

Yukon Gear – Minor Install Kit For Model 20 Differential (Part No.12066)

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Yukon Gear – Replacement Trail Repair Kit For Amc Model 20 With 1310 Size U/Joint And U-Bolts (Part No.32286)

Yukon Gear – Pinion Install Kit For Model 20 Differential (Part No.13082)

Pro-King – Crush Sleeve (Part No.721A034)

USA Standard Gear – Spartan Locker For Model 35 With 27 Spline Axles And A 1625" Carrier, Includes Heavy-Duty Cross Pin (Part No.17008)

Yukon Gear – Model 35 Roll Pin For Cross Pin Shaft, 0.190" Diameter (Part No.33320)

National – Bearings (Part No.A-6)

Yukon Gear – Standard Open Carrier Case, Amc Model 35, 3.55 & Up (Part No.20023)

Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)

Popular 1982 AMC Concord Differentials Categories

1982 AMC Concord Differentials

Differentials Brands To Make Your 1982 AMC Concord Last

Popular Dorman Differentials

Top 1982 AMC Concord Differentials from Driveworks

FAQs for 1982 AMC Concord Differentials

What are the most purchased Differentials for the 1982 AMC Concord?

What are the top-rated 1982 AMC Concord Differentials?

More Popular Parts for All Makes