1978 AMC Concord Differentials

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
• SMOOTH ROTATION — Crowned raceways for even load distribution
• OE-STYLE DESIGN — Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Product Features:

• Bulkhead quit connect fitting

Product Features:

• Fits AMC Model 35
• Steel
• Metal fill plug

5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:

• Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
• 1/2″ head

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

• Carrier bearing puller
• Works with an impact gun to safely and easliy remove carrrier bearings

Product Features:

• DANA-35 R/P 4.56 STD

Product Features:

• Bulkhead fitting kit
• Includes bulkhead fitting, outer fitting and o-ring

Product Features:

• CARRIER SHIMS – AMC MODEL 20

Product Features:

• Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
• 0.030″ thick

Product Features:

• PINION SHIM-DANA 30,35.50

Model 35 roll pin for cross pin shaft, 0.190″ DIA.

Product Features:

• Roll pin
• Fits AMC Model 35

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:

• Fits AMC Model 35 with 27 spline axles and 1.560″ side gear bore
• Made from 9310 steel for added strength
• Replaces the spiders in a standard carrier case

Product Features:

• DANA-35 R/P 3.55 RATIO

Product Features:

• DANA-35 MINI INSTALL KIT JEEP

Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for AMC Model 35 differential. This kit contains carrier bearings, races and shims.

Product Features:

• Fits AMC Model 35 with 27 spline axles
• Includes carrier bearings and races and “super” carrier shim kit

Model 20 gasket.

Product Features:

• Cover gasket
• Fits AMC Model 20

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

• Fits AMC Model 35 rear
• Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:

• Fits AMC Model 35
• Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

USA Standard Gear standard spider gear set for AMC Model 35 with 1.560″ side gear bore. (used in ’94 and newer models).

Product Features:

• Fits AMC Model 35 with open differential and 1.560″ side gear bore
• Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

• Fits AMC Model 20
• Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

Product Features:

• Brand may vary by location

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

Product Features:

• CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
• PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
• SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
• OE-STYLE DESIGN: Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Model 35 cover gasket.

Product Features:

• Cover gasket
• Fits AMC Model 35

Model 35 TracLoc & standard Open cross pin shaft, bolt design, 0.716″ DIA.

Product Features:

• Cross pin shaft
• Fits AMC Model 35
• Cross pin bolt design
• 0.716″ diameter

Product Features:

• BOLT 9″ FORD OPEN R.G. SAME AS M-4216A200

Bearing race driver. No return.

Product Features:

• Bearing race driver
• Fits M802011 race
• All steel construction