1981 Volkswagen Scirocco Cooling and Climate Controls

Essential 1981 Volkswagen Scirocco Cooling and Climate Controls

Beck/Arnley – Water Flange (Part No.147-0039)

Water Flange

from

$64.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Manufactured with high quality materials
  • Designed for underhood conditions
  • Quality constructed for durability
  • Application specific for this vehicle
See More

Imperial – Electric Fan – 10" Diameter (Part No.226110)

Electric Fan - 10" Diameter

from

$67.99
Electric fan with 10″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Rapid-Cool® Thin-Line electric fans
  • 10″ Diameter
  • 650 CFM
  • Use as a pusher or puller fan
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Carquest Premium – A/C Compressor Clutch Relay Connector (Part No.PTA1269)

A/C Compressor Clutch Relay Connector

from

$5.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26765)

O-Ring & Gasket A/C System Seal Kit

from

$12.29
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • Application specific
  • SUV and rear air applications
See More

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ

from

$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Factory Air – Carbon Shaft Seal Kit (Part No.24021)

Carbon Shaft Seal Kit

from

$26.99
All hardware included; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Corteco – Heater Pipe O-Ring (Part No.G3077462035CFW)

Heater Pipe O-Ring

from

$1.79
Heater Pipe O-Ring

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.433633)

Radiator: With Transmission Oil Cooler

from

$149.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

Febi – Expansion Tank (Part No.G103017714FEB)

Expansion Tank

from

$24.98
The Febi expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

Product Features:
  • OE-Equivalent and Direct Fit for easy Installation.
  • OE style connections and fittings.
  • Made of highly durable materials.
  • Resistant to thermal wear and cracking.
See More

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Thermostatic Fan Control - Preset

from

$38.49
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Preset thermostatic fan control
  • 185°F preset
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Beck/Arnley – Water Pump Gasket (Part No.039-0033)

Water Pump Gasket

from

$2.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Made from premium materials for durability
  • Designed for underhood conditions
  • Packaged in clear plastic for easy visibility and identification of all components
  • Application specific for this vehicle
See More

National – Bearings (Part No.5001-KFF)

Bearings

from

$33.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

APA/URO Parts – Heater Valve (Part No.R302017778APA)

Heater Valve

from

$7.90
Heater Valve

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Electric Fan - 12" Diameter

from

$94.99
Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Rapid-Cool® Thin-Line electric fans
  • 12″ Diameter
  • 800 CFM
  • Use as a pusher or puller fan
See More

APA/URO Parts – Expansion Tank Cap (Part No.G104036817APA)

Expansion Tank Cap

from

$4.80
The APA/URO Expansion Tank Cap is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Felpro – Multi-Purpose O-Ring (Part No.25598)

Multi-Purpose O-Ring

from

$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Factory Air – Green Round O-Ring (Part No.24610)

Green Round O-Ring

from

$0.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Vemo – A/C Blower Switch (Part No.R200219473VMO)

A/C Blower Switch

from

$14.72
A/C Blower Switch

Carquest Premium – Radiator Cap Tester Adapter (Part No.12017)

Radiator Cap Tester Adapter

from

$7.29
Tester adapter for the 9300 and MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Carquest Premium – A/C Filter Drier (Part No.T33363)

A/C Filter Drier

from

$26.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Graf – Graf Water Pump (Part No.G3000170730GRA)

Graf Water Pump

from

$84.88
The Graf Water Pump contains no remanufactured parts and is produced using an optimized all metal impeller design to assist in cooling under high RPM, and performance demands. Selection of raw materials, reliability of machinery and production processes, stringent controls throughout the production process, from melting to fitting, as well as reliability tests performed using equipment able to determine true performance, go to ensure this product is a real guarantee of safety and long life. The Graf water pump is centrifugal in type and comprises a bladed rotor linked by means of a shaft (which rotates on bearings housed in a support) to the drive gear; the seal between the pump and the motor block is guaranteed by a gasket, while the inside of the pump is guaranteed by a mechanical seal. Component parts: Impeller: supplies the fluid with the necessary energy to cover the entire cooling circuit. Mechanical seal: ensures fluid seal inside the pump. Bearing: transmits movement to the impeller and supports any ventilation parts. Entrainment part: for transmitting movement to the bearing. Pump body: supports the basic pump component parts and conveys the coolant in the motor block.

Product Features:
  • All the component parts fitted are pre-tested to evaluate durability, performance and reliability.
  • The bearings undergo a durability test equivalent to nominal lifespan and are then inspected to assess integrity.
  • The mechanical seals are tested in extreme coolant temperature conditions according to predefined cycles.
  • The shape of the impellers is optimized thanks to the use of prototypes on which flow and performance tests are performed.
  • On both the entrainment parts and the bodies, the choice of materials and/or technologies different to original ones is made on the basis of structural and mechanical tests.
  • After assembly all the pumps undergo seal tests on units that reject those with leaks above set limits.
See More

Geba – Water Pump Housing (Part No.G303084400GEB)

Water Pump Housing

from

$63.70
Water Pump Housing

Carquest Premium – Coolant Temperature Sensor with O-Ring and Install Clip (Part No.WTC1209)

Coolant Temperature Sensor with O-Ring and Install Clip

from

$8.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Heater Core (Part No.399901)

Heater Core

from

$71.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
  • Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
  • Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
See More

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1308)

Temperature Sender With Gauge

from

$9.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Felpro – Engine Water Pump Gasket (Part No.35549)

Engine Water Pump Gasket

from

$17.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

APA/URO Parts – Cooling Hose Flange (Part No.G202391045APA)

Cooling Hose Flange

from

$4.08
A.P.A. URO is a supplier to many automotive manufacturers and provides OE quality European replacement parts to the aftermarket. URO Parts is a highly diversified product line including, body rubber, electrical, suspension, steering, cooling and air conditioning components. End of cylinder head with out sensor outlet. (Associated O-ring 037 121 687)
See More

1981 Volkswagen Scirocco Cooling and Climate Controls

You count on your 1981 Volkswagen Scirocco to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 53 Cooling and Climate Controls ranging in price from $0.99 to $215.99, you’re sure to find everything you need for your 1981 Volkswagen Scirocco.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 18 different brands like Permatex, Imperial, and Carquest Premium. 1981 Volkswagen Scirocco Cooling and Climate Controls start as low as $0.99!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 1,110 extensive product reviews on 1981 Volkswagen Scirocco Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Electric Fan – 10" Diameter with 3.6 stars and Multi-Purpose O-Ring with 4.4 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1981 Volkswagen Scirocco below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 1981 Volkswagen Scirocco

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1981 Volkswagen Scirocco running right for years to come. In our inventory you’ll find brands like Permatex, Imperial, Carquest Premium, and even more.

Popular Permatex Cooling and Climate Controls

You’ll find popular Permatex brand products across Engine Cooling Parts. All are waiting to get your 1981 Volkswagen Scirocco back on the road. Some of the top-rated Permatex products in these categories are:
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
from $19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets

Top-Rated Cooling and Climate Controls


If are what you’re looking for, our inventory holds plenty. We stock brand Cooling and Climate Controls for your 1981 Volkswagen Scirocco, and some of our most reviewed parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets

FAQs for 1981 Volkswagen Scirocco Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 1981 Volkswagen Scirocco?

Out of 53 Cooling and Climate Controls for the 1981 Volkswagen Scirocco, the most popular in our inventory are:
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers
Electric Fan - 12" Diameter
from $94.99
(38)
Electric Fan – 12" Diameter
Radiator Fan Motors
Adjustable Thermostatic Fan Control
from $55.99
(33)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers

What are the top-rated 1981 Volkswagen Scirocco Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 1981 Volkswagen Scirocco based on customer reviews/ratings are:
Electric Fan - 10" Diameter
from $67.99
(14)
Electric Fan – 10" Diameter
“So, the Air Conditioner Condenser fan motor failed on my 2003 Dodge Ram 1500. It turns out that the 2002 – 2005 Rams all use the same AC Condenser fa”
Multi-Purpose O-Ring
from $2.49
(8)
Multi-Purpose O-Ring
“Easy to install, no leaks”
Thermostatic Fan Control - Preset
from $38.49
(8)
Thermostatic Fan Control – Preset
“I’ve been using this kit for several years on my off road truck. It’s hooked up to a powerful flex-a-lite fan and handles the load with ease. I have”