from

$37.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING — Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL — Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION — Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL — Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$58.81

Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:

Produced from spring steel for long-lasting flexibility of beads
Thermal stability up to 600F
Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
Tightening instructions provided with each gasket for perfect results

from

$216.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Head sets without head gasket(s)
Requires purchase of head gasket(s) separately
Premium quality parts
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Contains all the parts needed to complete the repair unless otherwise noted
Contains all the parts needed to complete the repair unless otherwise noted

from

$48.69

Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility. Features and Benefits

Product Features:

Produced from spring steel for long-lasting flexibility of beads
Thermal stability up to 600F
Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
Tightening instructions provided with each gasket for perfect results

from

$45.70

Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:

Produced from spring steel for long-lasting flexibility of beads
Thermal stability up to 600F
Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
Tightening instructions provided with each gasket for perfect results

from

$28.27

Cyl. Head Bolt Set

from

$4.30

Cylinder Head Bolt

from

$2.79

Cylinder Head Bolt

from

$61.42

Cylinder Head Bolt Set

from

$4.17

Cylinder Head Bolt

from

$1.01

Head Bolt Washer

from

$38.99

Using new head bolts when performing a cylinder head installation is always a good idea however, on late-model engines that came from the factory with TTY (torque-to yield) head bolts, replacement is an absolute necessity. TTY bolts are designed to exert the maximum clamping force for a tight head gasket seal, however they permanently stretched and could fail if re-used.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$32.99

Using new head bolts when performing a cylinder head installation is always a good idea however, on late-model engines that came from the factory with TTY (torque-to yield) head bolts, replacement is an absolute necessity. TTY bolts are designed to exert the maximum clamping force for a tight head gasket seal, however they permanently stretched and could fail if re-used.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Head bolt replacement recommended.
Torque-to-yield bolts are designed so that they can be elongated beyond their elastic limit into the plastic region without problems.

from

$35.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Cylinder head bolt set (GS) contains the head bolts necessary to replace one cylinder head. Torque-to-yield bolts cannot be reused, new fasteners ensure proper sealing load when used with new MAHLE Original head gaskets.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$29.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$43.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$58.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$21.79

Using new head bolts when performing a cylinder head installation is always a good idea however, on late-model engines that came from the factory with TTY (torque-to yield) head bolts, replacement is an absolute necessity. TTY bolts are designed to exert the maximum clamping force for a tight head gasket seal, however they permanently stretched and could fail if re-used.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$23.99

Using new head bolts when performing a cylinder head installation is always a good idea however, on late-model engines that came from the factory with TTY (torque-to yield) head bolts, replacement is an absolute necessity. TTY bolts are designed to exert the maximum clamping force for a tight head gasket seal, however they permanently stretched and could fail if re-used.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$17.55

The AE range of high quality valve-train components includes application-specific valves, design and manufactured to OE standards. The top-engine environment is increasingly hostile, due to turbocharging and other techniques for CO2 reduction. Only components that employ OE design expertise, with the latest advanced materials and manufacturing quality, can provide the performance and durability that professional engine technicians demand. Valves are subjected to some of the highest stresses and temperatures in the engine, yet not only must they survive, they must also continue to seal perfectly. As a top-engine expert with a long heritage of innovation, AE provides the answer with high-precision designs. The choice of material is so critical that some AE valves, known as bi-metallic valves, are made from two materials, with the head optimized for strength and temperature resistance and the stem optimized to resist wear.

Product Features:

OE Quality
Optimized for strength
High temperature strength
Stem optimized to resist wear

from

$36.48

The AE range of high quality valve-train components includes application-specific valves, design and manufactured to OE standards. The top-engine environment is increasingly hostile, due to turbocharging and other techniques for CO2 reduction. Only components that employ OE design expertise, with the latest advanced materials and manufacturing quality, can provide the performance and durability that professional engine technicians demand. Valves are subjected to some of the highest stresses and temperatures in the engine, yet not only must they survive, they must also continue to seal perfectly. As a top-engine expert with a long heritage of innovation, AE provides the answer with high-precision designs. The choice of material is so critical that some AE valves, known as bi-metallic valves, are made from two materials, with the head optimized for strength and temperature resistance and the stem optimized to resist wear.

Product Features:

OE Quality
Optimized for strength
High temperature strength
Stem optimized to resist wear

from

$12.20

The AE range of high quality valve-train components includes application-specific valves, design and manufactured to OE standards. The top-engine environment is increasingly hostile, due to turbocharging and other techniques for CO2 reduction. Only components that employ OE design expertise, with the latest advanced materials and manufacturing quality, can provide the performance and durability that professional engine technicians demand. Valves are subjected to some of the highest stresses and temperatures in the engine, yet not only must they survive, they must also continue to seal perfectly. As a top-engine expert with a long heritage of innovation, AE provides the answer with high-precision designs. The choice of material is so critical that some AE valves, known as bi-metallic valves, are made from two materials, with the head optimized for strength and temperature resistance and the stem optimized to resist wear.

Product Features:

OE Quality
Optimized for strength
High temperature strength
Stem optimized to resist wear

from

$26.43

The AE range of high quality valve-train components includes application-specific valves, design and manufactured to OE standards. The top-engine environment is increasingly hostile, due to turbocharging and other techniques for CO2 reduction. Only components that employ OE design expertise, with the latest advanced materials and manufacturing quality, can provide the performance and durability that professional engine technicians demand. Valves are subjected to some of the highest stresses and temperatures in the engine, yet not only must they survive, they must also continue to seal perfectly. As a top-engine expert with a long heritage of innovation, AE provides the answer with high-precision designs. The choice of material is so critical that some AE valves, known as bi-metallic valves, are made from two materials, with the head optimized for strength and temperature resistance and the stem optimized to resist wear.

Product Features:

OE Quality
Optimized for strength
High temperature strength
Stem optimized to resist wear

from

$60.51

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$18.30

The AE range of high quality valve-train components includes application-specific valves, design and manufactured to OE standards. The top-engine environment is increasingly hostile, due to turbocharging and other techniques for CO2 reduction. Only components that employ OE design expertise, with the latest advanced materials and manufacturing quality, can provide the performance and durability that professional engine technicians demand. Valves are subjected to some of the highest stresses and temperatures in the engine, yet not only must they survive, they must also continue to seal perfectly. As a top-engine expert with a long heritage of innovation, AE provides the answer with high-precision designs. The choice of material is so critical that some AE valves, known as bi-metallic valves, are made from two materials, with the head optimized for strength and temperature resistance and the stem optimized to resist wear.

Product Features:

OE Quality
Optimized for strength
High temperature strength
Stem optimized to resist wear

from

$17.15

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$17.34

The AE range of high quality valve-train components includes application-specific valves, design and manufactured to OE standards. The top-engine environment is increasingly hostile, due to turbocharging and other techniques for CO2 reduction. Only components that employ OE design expertise, with the latest advanced materials and manufacturing quality, can provide the performance and durability that professional engine technicians demand. Valves are subjected to some of the highest stresses and temperatures in the engine, yet not only must they survive, they must also continue to seal perfectly. As a top-engine expert with a long heritage of innovation, AE provides the answer with high-precision designs. The choice of material is so critical that some AE valves, known as bi-metallic valves, are made from two materials, with the head optimized for strength and temperature resistance and the stem optimized to resist wear.

Product Features:

OE Quality
Optimized for strength
High temperature strength
Stem optimized to resist wear

from

$18.53

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features: