1981 Plymouth PB150 Steering and Chassis Parts
More 1981 Plymouth PB150 Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1981 Plymouth PB150, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1981 Plymouth PB150 Steering and Chassis Parts
Cardone – Power Steering Pump (Part No.20-661)
from
$65.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)
from
$13.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rare Parts – Tie Rod Sleeve (Part No.RP26557)
from
$96.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with clamps
- Used to set Toe in or out
- replaces rusted or corroded sleeves
- Used to connect inner and outer tie rod ends
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Driveworks – BALL JOINT 1 EA DRIVE (Part No.DW-K778)
from
$28.49
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot provides extended temperature range and better wear resistance
- Test-proven stud material helps prevent premature stud failure
- Provides premium gauge steel construction for strength and durability
- Performance tested to ensure durability
Rare Parts – Drag Link (Part No.RP25957)
from
$139.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Improves steering stability
- Improves steering response
- Improves steering response
Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.36196)
from
$39.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Powercraft – Pump Seal Kit (Part No.7918)
from
$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Steering Gear Input Shaft Seal Kit (Part No.8553)
from
$51.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Dorman – Suspension Control Arm (Part No.520-315)
from
$151.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Carquest Premium – Pressure Hose Assembly (Part No.36694)
from
$69.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Driveworks – STRUT ROD BUSHING KIT (Part No.DW-K7090B)
from
$20.49
STRUT ROD BUSHING KIT
Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)
from
$46.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Rare Parts – Self-Lock Nut Kit (Part No.RP16158)
from
$30.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Retains bushings
Powercraft – Steering Gear Complete Pitman Shaft Seal Kit (Part No.8765)
from
$54.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – Idler Arm (Part No.DW-K7106)
from
$48.49
Driveworks Brand idler arms help to restore vibration-free driving and prevent tire wear. Driveworks Brand chassis parts promote improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
MOOG – Strut Rod Bushing Kit (Part No.K7090)
from
$54.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to meet or exceed OE requirements
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
- Loose or worn chassis parts can lead to premature tire wear
MOOG – Radius Arm Nut Kit (sold by each) (Part No.K4006)
from
$22.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to meet or exceed OE requirements
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
MOOG – Suspension Stabilizer Bar Link Kit (Part No.K8097)
from
$8.29
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet dependable operation
- NASCAR-proven performance
- Provides like-new steering ease of installation and longer life
Powercraft – Steering Gear Control Valve Seal Kit (Part No.8518)
from
$16.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Steering Gear Major Seal Kit (Part No.8513)
from
$65.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rancho – RS5000 Steering Damper (Part No.RS5403)
from
$78.99
Ideal for off-road driving, towing and street applications, Rancho® RS5000® steering stabilizers enhance a vehicle’s performance and minimize on- and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
- ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires
- ENGINEERED TO LAST — Features protective boot to safeguard shock rod and oil seal
- HANDLES EXTREME TEMPERATURE CHANGES — Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
Driveworks – Camber Bolt Kit (Part No.DW-K8243A)
from
$15.29
Camber Bolt Kit
Cardone – Power Steering Filter (Part No.20-0058F)
from
$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
National – Multi Purpose Seal (Part No.7013S)
from
$20.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Lares – Remanufactured Power Steering Gear Box (Part No.1031)
from
$625.99
Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
MOOG – Tie Rod End (Part No.ES2120R)
from
$65.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Driveworks – STABLIZER LINK (Part No.DW-K8097)
from
$5.79
STABLIZER LINK
Popular 1981 Plymouth PB150 Steering and Chassis Parts Categories
1981 Plymouth PB150 Steering and Chassis Parts
You count on your 1981 Plymouth PB150 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 82 Steering and Chassis Parts ranging in price from $2.99 to $625.99, you’re sure to find everything you need for your 1981 Plymouth PB150.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 13 different brands like Imperial, Carquest Premium, and Cardone. 1981 Plymouth PB150 Steering and Chassis Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,176 extensive product reviews on 1981 Plymouth PB150 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Pump with 3.2 stars and Power Steering Pump with 3.1 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1981 Plymouth PB150 below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1981 Plymouth PB150
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1981 Plymouth PB150 running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Cardone, and even more.
Popular Dorman Steering and Chassis Parts
You’ll find popular Dorman brand products across Ball Joints. All are waiting to get your 1981 Plymouth PB150 back on the road. Some of the top-rated Dorman products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1981 Plymouth PB150, and some of our most reviewed Imperial parts include:
FAQs for 1981 Plymouth PB150 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1981 Plymouth PB150?
Out of 82 Steering and Chassis Parts for the 1981 Plymouth PB150, the most popular in our inventory are:
from
$7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
from
$2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses
What are the top-rated 1981 Plymouth PB150 Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1981 Plymouth PB150 based on customer reviews/ratings are:
