1981 Oldsmobile Cutlass Cruiser Performance and Racing Products

Essential Performance and Racing Products for 1981 Oldsmobile Cutlass Cruisers

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Edelbrock – Signature Series Valve Covers: Small Block Chevy 262-400 1959-86, Black Steel (Part No.4443)

Signature Series Valve Covers: Small Block Chevy 262-400 1959-86, Black Steel

from

$56.99
The Edelbrock #4443 Signature Series Valve Covers are designed for Chevrolet 262-400 ’59-86 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

Product Features:
  • Small Block Chevy 262-400 1959-86
  • Short
  • Black Steel
  • Set Of Two
  • Matching breathers sold separately.
See More

Energy Suspension – Hyper-Flex System (Part No.3.18110G)

Hyper-Flex System

from

$342.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

B & M – Transpak For 68-81 TH 350 Transmission (Part No.30228)

Transpak For 68-81 TH 350 Transmission

from

$141.99
The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.

Product Features:
  • Recalibrate Auto. Transmission
  • Optimum Performance
  • Select Your App. Mode
  • Improves Transmission Life
  • Trans. Removal Not Required
See More

Energy Suspension – Control Arm Bushing Set (Part No.3.3171R)

Control Arm Bushing Set

from

$57.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

B & M – Automatic Shifter, Quicksilver 4 Speed (Part No.80683)

Automatic Shifter, Quicksilver 4 Speed

from

$439.99
The B&M Quicksilver features a ratcheting action for positive shifts, Chrome Knob, neutral safety switch, NHRA/IHRA approved Reverse Lockout. Fits Most 3 and 4 speeds.

Product Features:
  • Universal Floor Mount Application
  • Base Trimmed For Custom Fit
  • Cable Operated
  • Quick Installation
  • Accurate Shifting
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$39.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
  • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1800)

PERFORMANCE OIL PAN GASKET SET

from

$18.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Energy Suspension – Control Arm Bushing Set (Part No.3.3156R)

Control Arm Bushing Set

from

$111.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Lakewood – Drag Shock-70/30:GM (Rear) (Part No.40310)

Drag Shock-70/30:GM (Rear)

from

$104.99
The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.

Product Features:
  • Excellent Weight Transfer
  • Lets Front End Down Quickly
  • Maximum Traction
  • Makes Vehicle Safer
  • Easier Control At End Of Track
  • Better Overall Stability
See More

Lakewood – Drag Shock-70/30:GM (Part No.40120)

Drag Shock-70/30:GM

from

$104.99
The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.

Product Features:
  • Excellent Weight Transfer
  • Lets Front End Down Quickly
  • Maximum Traction
  • Makes Vehicle Safer
  • Easier Control At End Of Track
  • Better Overall Stability
See More

Spectre – GM Differential Cover Camaro/S-10 (Part No.6074)

GM Differential Cover Camaro/S-10

from

$47.99
Spectre’s Differential Covers are made to OEM specifications and are triple chrome plated for a lasting shine. Designed to protect the intricate moving parts of the differential, Spectre’s covers add an extra layer of protection to the vehicle’s underside. Featuring a 10-bolt design and includes a gasket, this differential cover is designed to fit 1978 and up Chevy/GM intermediates, 1982 and up Chevy Camaro/Pontiac Firebird, 1993-2002 Chevy Camaro/Pontiac Firebird V6, 1982-2003 Chevy S10/S15/Envoy, 1985-1998 Chevy Astro/GMC Safari, and 1998-2003 Isuzu differentials. Includes 10 SAE standard chrome bolts for installation. You’ll need to supply your own bolts if your application requires metric bolts.

Product Features:
  • 10 bolt design cover
  • Includes gasket
  • Triple chrome plated for a lasting shine
  • 10 chrome 5/16 inch -18 x 3/4 inch differential cover bolts included
See More

Accel – GM Hei Supercoil Red/White (Part No.140005)

GM Hei Supercoil Red/White

from

$113.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Highly Specialized Silicone Magnetic Steel Cores
  • Similar to Standard Motor Products SMP Dr-32
  • Long Life And Great Looks
See More

Hypertech – Street Runner Power Chip (Part No.321001)

Street Runner Power Chip

from

$158.89
Hypertech Power Chips are engineered for stock 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. Street Runner Power Chips are designed for daily street driving or competition in unmodified vehicles using a stock thermostat.

Product Features:
  • Designed For Daily Street Driving
  • For Unmodified Vehicles w/Stock Thermostat
  • Controls Engines Air/Fuel Ratio
  • Controls Spark Advance For Max Power
  • Potential Gas Mileage Improvements
  • No Wiring Or Soldering Required
  • Installs In Less Than 30 Minutes
  • Product might not be available in all states due to local laws.
See More

Edelbrock – Intake Manifold Gasket for 1958-1986 Small-Block Chevy (Part No.72018)

Intake Manifold Gasket for 1958-1986 Small-Block Chevy

from

$244.99
Any gasket can create a seal, but a good gasket can do it with reduced clamping force and for a long period of time. Edelbrock gaskets are manufactured from extremely high-quality materials and are specifically designed to fit Edelbrock intakes and cylinder heads, so there’s no chance that they will interfere with component operation.

Product Features:
  • 10-Pack of 7201 Intake Gasket Sets
See More

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942448)

Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

from

$113.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Motive Gear – Differential Mini Spool (Part No.MS7.5-26)

Differential Mini Spool

from

$98.99
Motive Gear Mini-Spools replace your stock spider and side gears with a solid billet mini-spool for 100% traction to both wheels. Not recommended for street applications.

Product Features:
  • Billet construction
  • Not recommended for street applications
  • GM7.5″ MINI SPOOL 26 SPLINE
See More

MSD Ignition – Distributor Cap and Rotor; GM HEI Distributor; Red (Part No.8416)

Distributor Cap and Rotor; GM HEI Distributor; Red

from

$46.49
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:
  • Designed w/Performance In Mind
  • High Quality Material
  • Stainless Terminals
  • Performance replacement part
See More

Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)

Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR)

from

$407.99
Product Features:
  • Satin Finish
  • 4 Barrel
  • Annular Booster Type
  • Manual Choke Type
  • 750 cfm Maximum Flow Rating
See More

Mr. Gasket – Performance Exhaust Gasket Set for Enhanced Sealing and Durability (Part No.150B)

Performance Exhaust Gasket Set for Enhanced Sealing and Durability

from

$20.99
Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.

Product Features:
  • Manufactured from high-temperature acrylic blend exhaust material
  • Provides excellent sealing and durability
  • Can be trimmed if necessary for modified port applications
  • For OE replacement, high performance street, drag race and oval track use
  • Resists Deteriorating
  • Provides Excellent Torque Retention
See More

Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13128R)

Ball Joint Dust Boot Set

from

$10.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Lasts Longer
  • Looks Great
See More

Competition Cams – CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA (Part No.12-250-3)

CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA

from

$258.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:
  • Excellent performance in street carbureted applications.
  • More vacuum allows an increase in duration for improved performance and assists power brakes.
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Tie Rod Dust Boot

from

$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

MSD Ignition – Distributor; Oldsmobile V8; Ready-to-Run (Part No.8529)

Distributor; Oldsmobile V8; Ready-to-Run

from

$647.99
Die hard Oldsmobile enthusiasts have been asking about a Ready-to-Run distributor and here it is! Ready-to-Run means just that, drop it in the engine, connect three wires and fire up your olds. Inside the billet aluminum housing there is a high-output inductive ignition module that lights the spark. This module now has a built-in rev limiter to protect your olds from overrev protection damage. A polished steel shaft spins in the center of this module and is guided by a sealed ball bearing for great stability. Another great benefit of the MSD Ready-to-Run distributor is the mechanical advance. The weights and assembly are fine-blanked from chromoly for absolute precision resulting in smooth timing changes. You can set up a timing curve to match your engine’s specifications easily with the supplied advance springs and bushings plus there is a vacuum advance for economy. The distributor is supplied with the MSD cap, race rotor, wire retainer and gear.

Product Features:
  • Simple and clean three wire installation
  • CARB E.O. Approved
  • Does not require an MSD Ignition Control
  • Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
  • Nylon pads ensure smooth operation of the advance weights
  • Advance weight pins are staked and tig welded to the plate
  • Mech. advance assem. can be locked out for crank trigger systems
  • Advance plate and weights are fine blanked from chrome moly steel
See More

Lakewood – Trans Mount: Urethane-Chevy (Part No.24350)

Trans Mount: Urethane-Chevy

from

$84.99
Constructed of durable polyurethane to handle the stress oh high horsepower. Absorbs vibration and lasts longer than rubber Features unique built-in safety lock to keep from separating under high torque loads. Ideal for use on street or strip applications. Complete with grade-8 mounting hardware.

Product Features:
  • Durable Polyurethane
  • Absorbs Vibration
  • Last Longer Than Rubber
  • Built-In Safety Lock
See More

Edelbrock – Concealed Nitrous Kits for EFI Applications (20-30 Hp) (Part No.70028)

Concealed Nitrous Kits for EFI Applications (20-30 Hp)

from

$388.99


Product Features:
  • Easily Concealable
  • Install In Minutes
  • Quick Removal
  • No Obvious Signs Of Installation
  • No Obvious Signs Of Use
See More

MSD Ignition – Rotor; GM HEI (Part No.8410)

Rotor; GM HEI

from

$13.29
Replacement rotor for Chevrolet HEI style distributors.

Product Features:
  • For HEI distributors
  • Resist carbon tracking
  • Low resistance brass
  • Max voltage transfer
  • Molded from insulated material
See More

Mr. Gasket – Oil Pan Bolt Kit (Part No.6085)

Oil Pan Bolt Kit

from

$17.49
The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.

Product Features:
  • Ideal For Tight Spaces
  • Serrations Prevent Loosening
  • Flange Distributes Pressure
  • Zinc Plated Bolts
  • Grade 5 Material
  • Easy Installation
See More

Upgrade your 1981 Oldsmobile Cutlass Cruiser with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1981 Oldsmobile Cutlass Cruiser, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Performance and Racing Products are key to keeping your Cutlass Cruiser functioning at its best. At Advance Auto Parts, we offer a wide selection of 99 Performance and Racing Products for the 1981 Oldsmobile Cutlass Cruiser, designed to meet your needs without breaking the bank. From Performance Engine replacements to Performance Exhaust Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1981 Oldsmobile Cutlass Cruiser at great prices. Our Performance and Racing Products inventory for this model ranges from just $9.99 to $1,138.99, with an average price of $278.50. Our 99 Performance and Racing Products in stock come from 20 trusted brands, so you’re sure to find the right part for your 1981 Oldsmobile Cutlass Cruiser without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1981 Oldsmobile Cutlass Cruiser, we stock popular OEM and aftermarket Performance and Racing Products from top names like MSD Ignition, Mr. Gasket, Edelbrock, and more. MSD Ignition Performance and Racing Products start at just $13.29 and boast an impressive 4 stars average rating from customers. Mr. Gasket and Edelbrock also bring quality to the table, with Performance and Racing Products available starting at $17.49, and at an average 4 stars rating. With 435 customer reviews and counting, our 1981 Oldsmobile Cutlass Cruiser Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1981 Oldsmobile Cutlass Cruiser is always ready to roll. We’re committed to providing you with everything you need to keep your Cutlass Cruiser in top shape, all in one place. Start shopping confidently below for your 1981 Oldsmobile Cutlass Cruiser!

Best-Selling Performance Engines for 1981 Oldsmobile Cutlass Cruisers

Enhance the driving experience in your Oldsmobile with 12 quality Performance Engine components, starting at $18.29.

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Edelbrock – Performer Small-Block Oldsmobile 350 EGR Intake Manifold (Part No.3711)

Performer Small-Block Oldsmobile 350 EGR Intake Manifold

from

$463.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1800)

PERFORMANCE OIL PAN GASKET SET

from

$18.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Spectre – Water Neck; Olds (Part No.4733)

Water Neck; Olds

from

$26.99
Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.

Product Features:
  • Fits Oldsmobile 330, 350, 425 and 455 engines
  • Chrome plated
  • Bolts included
  • Designed for OEM fit
  • Easy to install
  • O-ring/gasket not included
See More

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 3 Piece Set (Part No.1200)

Lower Intake Manifold Gasket Set: 3 Piece Set

from

$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Edelbrock – Performer-Plus Camshaft Kit for Buick 231-252 V6 Even Fire (Part No.5487)

Performer-Plus Camshaft Kit for Buick 231-252 V6 Even Fire

from

$367.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched To Performer Intake PN[5486]
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1000)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$59.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Steel wire rings for the greatest combustion seal strength.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Performer Buick 3.8L, 4.1L V6 Intake Manifold (Part No.5486)

Performer Buick 3.8L, 4.1L V6 Intake Manifold

from

$381.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • Not for C-3 and C-4 Electronic Fuel Mngmt Systems
See More

B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

Torque Converter, Nitrous Holeshot 3600

from

$665.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:
  • 3400-3800 RPM
  • Small And Big Blocks
  • Serious Performance
  • Furnace Brazed
  • Fully Balanced
See More

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.42-222-4)

Xtreme Energy 218/224 Hydraulic Flat Cam

from

$548.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:
  • Excellent performance in street carbureted applications.
  • More vacuum allows an increase in duration for improved performance and assists power brakes.
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More

Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam (Part No.42-223-4)

Xtreme Energy 224/230 Hydraulic Flat Cam

from

$337.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:
  • Excellent performance in street carbureted applications.
  • More vacuum allows an increase in duration for improved performance and assists power brakes.
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More

Competition Cams – Thumpr 226/241 Hydraulic Flat Cam (Part No.42-600-5)

Thumpr 226/241 Hydraulic Flat Cam

from

$324.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
  • Best with aftermarket converters and more rear gear.
  • Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
See More

Most Popular 1981 Oldsmobile Cutlass Cruiser Performance Exhaust Products

Customize your Oldsmobile with 6 Performance Exhaust Products products like Performance Exhaust Mufflers, Performance Exhaust Manifold Gaskets, and Performance Exhaust System Kits, all priced under $259.99.

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942448)

Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

from

$113.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42443)

40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

from

$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.942453)

50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound

from

$139.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.842453)

50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound

from

$175.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Dynomax – 89017 Exhaust System Kit (Part No.89017)

89017 Exhaust System Kit

from

$259.99
Give your vintage vehicle’s exhaust system an upgrade with a DynoMax® dual header kit. Designed to attach with OE headers, it features a special reducer that allows for a variety of mounting options.

Product Features:
  • COMPATIBILITY — Designed for 1978-1987 midsize sedans such as Oldsmobile Cutlass, Chevrolet Monte Carlo, Buick Regal and Pontiac Grand Prix; see product information for compatibility and engine spec
  • BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with this kit that attaches to OE headers
  • FLEXIBLE MOUNTING — Special reducer design allows for a variety of mounting options
  • IMPROVED FLOW CAPACITY — Smooth bends improve flow capacity over traditional bends
  • SPECS — Extra-long tailpipes with side exits with a full 2.25-in. diameter; tail pipes exit on each side of vehicle at rear bumper
  • COMPLETE SOLUTION — Includes all the necessary clamps, hangers, flanges, gaskets, mounting hardware, intermediate, extension and tail pipes
  • PREMIUM MATERIALS – Made from quality aluminized steel for durability and long life
  • BETTER TOGETHER — Complete your system with premium DynoMax mufflers and DynoMax accessories for a complete performance exhaust system
  • WARNING — Not legal for use on pollution-controlled motor vehicles; headers are for racing use only and not intended or applicable for highway use
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1400)

Exhaust Manifold Gasket Set

from

$33.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Top Picks for 1981 Oldsmobile Cutlass Cruiser Performance Distributors

Upgrade Oldsmobile Cutlass Cruisers with top-quality Performance Distributors parts, including 10 OEM and aftermarket selections for your 1981 model.

PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)

D9001 Flame-Thrower HEI Distributor Advance Curve Kit

from

$26.99
Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.

Product Features:
  • PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
  • Precision machined chromoly weights and center plate.
See More

MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)

Distributor Cap; GM HEI; Red

from

$49.49
The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.

Product Features:
  • Stock GM HEI replacement distributor cap
  • Red
See More

MSD Ignition – Distributor Cap and Rotor; GM HEI Distributor; Red (Part No.8416)

Distributor Cap and Rotor; GM HEI Distributor; Red

from

$46.49
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:
  • Designed w/Performance In Mind
  • High Quality Material
  • Stainless Terminals
  • Performance replacement part
See More

Accel – Dist:Chev V8 Hei Vac W/Coil (Part No.59107C)

Dist:Chev V8 Hei Vac W/Coil

from

$210.99
Performance Replacement HEI Distributor, direct plug-in with OE type connectors, GM HEI equipped Cars, Trucks (Pre-Computer). High dielectric strength cap, brass male towers. ACCEL Performance Replacement Distributors are the perfect choice for your daily driver or street machine. Using all new components, these distributors feature High-performance ACCEL Electronics. All new components-housings are either new castings or turned from billet stock, centerless ground shaft with oil lite bushings. High dielectric strength cap, balanced rotor. Male tower distributor cap with brass cap and rotor contacts (Ford and AMC Models feature screw-mounted wire retainer for the ultimate plug wire retention). Iron or steel distributor gear. Direct plug-in replacement with factory-type connectors for plug and play installation.

Product Features:
  • Direct Plug In Factory Replacement Plug And Play
  • CNC Machined 6061 T6 Billet Aluminum Housing
  • High Dielectric Strenght Thermoplastic Cap With Br
  • 4 Topin Module With Dwell Control Triggers At 75 R
  • Easy Access Fully Adjustable Mechanical Advance
  • Adjustable Vacuum Advance
  • Includes Performance Coil
  • Fit non computerized vehicles
See More

PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)

D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor

from

$30.99
Wiring Harness and CapacitorPremium quality wire harness and capacitor insure good connection and “static free” operation.

Product Features:
  • PerTronix D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor
  • Premium quality wire harness and capacitor.
See More

MSD Ignition – Rotor; GM HEI (Part No.8410)

Rotor; GM HEI

from

$13.29
Replacement rotor for Chevrolet HEI style distributors.

Product Features:
  • For HEI distributors
  • Resist carbon tracking
  • Low resistance brass
  • Max voltage transfer
  • Molded from insulated material
See More

PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)

D4061 Flame-Thrower HEI Distributor Rotor Red

from

$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:
  • Made from hi-performance 60 KV rated alkyd molding compound.
  • Cap and rotor kits include nylon rotor hold-down screws.
  • Flame-Thrower dust covers provide a larger air gap around the coil.
See More

MSD Ignition – Distributor; Oldsmobile V8; Ready-to-Run (Part No.8529)

Distributor; Oldsmobile V8; Ready-to-Run

from

$647.99
Die hard Oldsmobile enthusiasts have been asking about a Ready-to-Run distributor and here it is! Ready-to-Run means just that, drop it in the engine, connect three wires and fire up your olds. Inside the billet aluminum housing there is a high-output inductive ignition module that lights the spark. This module now has a built-in rev limiter to protect your olds from overrev protection damage. A polished steel shaft spins in the center of this module and is guided by a sealed ball bearing for great stability. Another great benefit of the MSD Ready-to-Run distributor is the mechanical advance. The weights and assembly are fine-blanked from chromoly for absolute precision resulting in smooth timing changes. You can set up a timing curve to match your engine’s specifications easily with the supplied advance springs and bushings plus there is a vacuum advance for economy. The distributor is supplied with the MSD cap, race rotor, wire retainer and gear.

Product Features:
  • Simple and clean three wire installation
  • CARB E.O. Approved
  • Does not require an MSD Ignition Control
  • Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
  • Nylon pads ensure smooth operation of the advance weights
  • Advance weight pins are staked and tig welded to the plate
  • Mech. advance assem. can be locked out for crank trigger systems
  • Advance plate and weights are fine blanked from chrome moly steel
See More

PerTronix – D4062 Flame-Thrower HEI Distributor Rotor Blue (Part No.D4062)

D4062 Flame-Thrower HEI Distributor Rotor Blue

from

$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:
  • Made from hi-performance 60 KV rated alkyd molding compound.
  • Cap and rotor kits include nylon rotor hold-down screws.
  • Flame-Thrower dust covers provide a larger air gap around the coil.
See More

PerTronix – D4260 Flame-Thrower Distributor Rotor HEI/EST Black (Part No.D4260)

D4260 Flame-Thrower Distributor Rotor HEI/EST Black

from

$10.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:
  • Made from hi-performance 60 KV rated alkyd molding compound.
  • Cap and rotor kits include nylon rotor hold-down screws.
  • Flame-Thrower dust covers provide a larger air gap around the coil.
See More

In-Demand Performance Fuel Systems for 1981 Oldsmobile Cutlass Cruisers

Select from 8 premium Performance Fuel Systems parts for your 1981 Oldsmobile Cutlass Cruiser, with prices ranging from $394.99 to $541.99.

Edelbrock – Performer 1404 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1404)

Performer 1404 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

from

$435.99
The Edelbrock 1404 Performer Series 500 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Manual Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Edelbrock – CARBURETOR (Part No.14054)

CARBURETOR

from

$488.99
Product Features:
  • EnduraShine Finish
  • GM/AMC-Style Throttle Linkage
  • Can Add Electric Choke PN[1478]
  • Easy Tuning with 2-Piece Design
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Edelbrock – Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1406)

Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

from

$428.99
The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Electric Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)

Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

from

$394.99
The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Manual Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Edelbrock – Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1407)

Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

from

$451.99
The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Manual Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Edelbrock – CARBURETOR (Part No.14064)

CARBURETOR

from

$541.99
Product Features:
  • EnduraShine Finish
  • GM/AMC-Style Throttle Linkage
  • Electric Choke Installed from Factory
  • Easy Tuning with 2-Piece Design
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Edelbrock – Reman Thunder AVS Carb #18129 800 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.18129)

Reman Thunder AVS Carb #18129 800 CFM With Manual Choke, Satin Finish (Non-EGR)

from

$413.99
Product Features:
  • Satin Finish
  • 4 Barrel
  • Aluminum Body Material
  • Manual Choke Type
  • 800 cfm Maximum Flow Rating
See More

Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)

Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR)

from

$407.99
Product Features:
  • Satin Finish
  • 4 Barrel
  • Annular Booster Type
  • Manual Choke Type
  • 750 cfm Maximum Flow Rating
See More

Most Sold 1981 Oldsmobile Cutlass Cruiser Performance Ignition Products

Explore our best-selling Oldsmobile parts for the 1981 Cutlass Cruiser among 7 OEM and aftermarket options starting from $30.49.

Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)

High Energy Ignition Coil for GM HEI - 1973-1991

from

$100.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Highly Specialized Silicone Magnetic Steel Cores
  • Standard Motor Products SMP Dr-31
  • MSD 8225
See More

MSD Ignition – High Energy Ignition Coil for GM HEI Distributors (Part No.8225)

High Energy Ignition Coil for GM HEI Distributors

from

$112.99
HEI owners now have a choice to replace their stock coil with the MSD high energy unitized coil for GM HEI distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI module, PN 83645. The coil features special low induc?tance, high temperature windings which charge faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.

Product Features:
  • Direct performance replacement for GM HEI coil-in-cap dist.
  • 70:1 Turns Ratio
  • Lower Primary Resistance Produces High Voltage Output
  • Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Accel – GM Hei Supercoil Red/White (Part No.140005)

GM Hei Supercoil Red/White

from

$113.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Highly Specialized Silicone Magnetic Steel Cores
  • Similar to Standard Motor Products SMP Dr-32
  • Long Life And Great Looks
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)

Mod HEI Dust Cover, V8 & Odd Fire V6

from

$72.99
Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.

Product Features:
  • Externally mounted coil
  • Increases reliability
  • Increase performance
  • High quality plastic
  • Resist spark loss
  • Use brass conductors
  • Low resistance connections
  • No modifications
See More

Top-Rated Performance and Racing Products Brands For Your 1981 Oldsmobile Cutlass Cruiser

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1981 Oldsmobile Cutlass Cruisers. Below you’ll find some of our best rated Performance and Racing Products from MSD Ignition, Mr. Gasket, and Edelbrock, and more. Performance and Racing Products from these brands that fit a 1981 Cutlass Cruiser start at just $13.29 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular MSD Ignition 1981 Oldsmobile Cutlass Cruiser Performance and Racing Products

When it comes to maintaining or upgrading your 1981 Oldsmobile Cutlass Cruiser, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. MSD Ignition ticks all of those boxes. We offer a wide selection of MSD Ignition Performance and Racing Products, specifically designed for the 1981 Oldsmobile Cutlass Cruiser. With over 6 MSD Ignition brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $13.29, with an average price of just $157.21. Plus, with over 51 customer reviews and an average rating of 4 stars, you can trust that our MSD Ignition Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Distributor; Oldsmobile V8; Ready-to-Run
from
$647.99
This product is not rated

Distributor; Oldsmobile V8; Ready-to-Run

“”

Rotor; GM HEI
from
$13.29
This product is not rated

Rotor; GM HEI

“”

Mod HEI Dust Cover, V8 & Odd Fire V6
from
$72.99
This product is not rated

Mod HEI Dust Cover, V8 & Odd Fire V6

“”

Popular Mr. Gasket 1981 Oldsmobile Cutlass Cruiser Performance and Racing Products

Mr. Gasket auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1981 Oldsmobile Cutlass Cruiser owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1981 Cutlass Cruiser, Advance Auto Parts carries a full inventory of 5 Mr. Gasket Performance and Racing Products. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Mr. Gasket Performance and Racing Products range from $17.49 to $98.99, plus, with more than 20 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

Oil Pan Bolt Kit
from
$17.49
This product is not rated

Oil Pan Bolt Kit

“”

Differential Cover Kit
from
$64.99
This product is not rated

Differential Cover Kit

“”

Thermocap Radiator Cap
from
$48.09
This product is not rated

Thermocap Radiator Cap

“”

FAQs for 1981 Oldsmobile Cutlass Cruiser Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1981 Oldsmobile Cutlass Cruisers?

Out of 99 Performance and Racing Products that fit 1981 Oldsmobile Cutlass Cruisers, the following parts are the top sellers:

What’s the price range for 1981 Oldsmobile Cutlass Cruiser Performance and Racing Products?

Performance and Racing Product prices for the 1981 Oldsmobile Cutlass Cruiser start at $9.99 and go up to $1,138.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1981 Oldsmobile Cutlass Cruiser?

The average price for Performance and Racing Products for the 1981 Oldsmobile Cutlass Cruiser is $278.50. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Oldsmobile Cutlass Cruiser model years?

Yes, we currently carry Performance and Racing Products for 4 model years of Oldsmobile Cutlass Cruisers between 1980 and 1992. Performance and Racing Products are bought most frequently for the following model years: 1992, 1991, 1988, and 1980.

What are the cheapest Performance and Racing Products for my 1981 Oldsmobile Cutlass Cruiser?

The cheapest 1981 Oldsmobile Cutlass Cruiser Performance and Racing Products we carry in stock are:

What are the top-rated Performance and Racing Products that fit the 1981 Oldsmobile Cutlass Cruiser?

Out of 435 reviews by customers, our 1981 Oldsmobile Cutlass Cruiser Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1981 Oldsmobile Cutlass Cruiser and their top-rated products:

Can I get help with 1981 Oldsmobile Cutlass Cruiser Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Performance and Racing Products and more.

What is your return policy for Oldsmobile Cutlass Cruiser Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Oldsmobile Cutlass Cruiser Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.