1981 Mazda 626 Brake Parts
More 1981 Mazda 626 Brake Parts Categories
If you’re looking for an original Brake Parts replacement for a 1981 Mazda 626, you can search through our selection below. You’ll also find aftermarket and OEM Brake Parts to meet your needs.
Essential 1981 Mazda 626 Brake Parts
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2015)
from
$96.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-74621)
from
$90.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2000)
from
$134.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2754)
from
$138.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-74622)
from
$87.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5110)
from
$99.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Carquest Wearever – Wheel Cylinder (Part No.WCA37547)
from
$14.49
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.
Product Features:
See More
Product Features:
- Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
- Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
- Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
- Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
Carquest Wearever – WHEEL CYLINDER (Part No.WCA37787)
from
$20.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability
Product Features:
See More
Product Features:
- All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
- Key components like spring are from high and stable quality suppliers.
- Products are machined by CNC machines with strictly quality control.
- Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
- Manufactured to strict engineering quality standards, meets S.A.E. specifications
- Each product is 100% tested on production lines and sampling tested prior to shipment
- Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.042 mm
- Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
- Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
Carquest Wearever – Wheel Cylinder (Part No.WCA37575)
from
$19.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.
Product Features:
See More
Product Features:
- Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
- Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
- Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
- Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA37546)
from
$14.49
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.
Product Features:
See More
Product Features:
- Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
- Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
- Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
- Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14129)
from
$13.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
- Corrosion resistant coating for long-lasting durability against harsh roads
- Manufactured with quality materials to suppress high stress levels
- Helps deliver a quieter, more efficient braking system
Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14040)
from
$11.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
- Corrosion resistant coating for long-lasting durability against harsh roads
- Manufactured with quality materials to suppress high stress levels
- Helps deliver a quieter, more efficient braking system
Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14100)
from
$16.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
- Corrosion resistant coating for long-lasting durability against harsh roads
- Manufactured with quality materials to suppress high stress levels
- Helps deliver a quieter, more efficient braking system
Carquest Wearever – Caliper Guide Pin-Bolt Kit (Part No.14080)
from
$8.09
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.
Product Features:
See More
Product Features:
- Prevents noise and premature wear
- Eliminates heat and corrosion deterioration
- Minimizes drag to improve gas mileage
- Restores brakes to like-new performance
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD637)
from
$37.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Single layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Carquest Premium Gold – Semi-Metallic Brake Pads – Front (4-Pad Set) (Part No.GMKD399)
from
$28.49
CARQUEST Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet and clean braking. CQ Wearever Gold brake pads are also manufactured by leading brake pad suppliers that OEM and OES heritage. Trust CQ Wearev
Product Features:
See More
Product Features:
- Application-specific friction formulations provide shorter stopping distances and extended pad life
- Hardware included for most applications, provides better value and
- OE-designed slots and chamfers to reduce noise and vibration
- Multi-layer shim provides near silent braking
- Powder-coated backing plate prevents corrosion
PowerStop – Z17 Low-Dust Ceramic Brake Pads with Hardware (Part No.17-583)
from
$40.99
The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
Product Features:
See More
Product Features:
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Positive mold technology for consistent wear and performance
- Thermal scorched pad surface for a fast break-in
- Chamfered and slotted to ensure noise free braking
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Multi-Layer rubberized shims provide virtually noise-free braking
- Includes Premium stainless-steel hardware for easy installation
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD583)
from
$19.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Single layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD399)
from
$17.79
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Single layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Akebono ProAct – Ceramic Brake Pads Ultra-Premium (Part No.ACT637)
from
$67.99
Product Features:
See More
- Made in the USA
- OE Manufacturer
- Ceramic Brake Pad
- Low Dust
- Powerful Quiet Stopping
- Ultra-Premium
- Perfect Upgrade for all Braking Systems
Carquest Premium Gold – Ceramic Brake Pads – (4-Pad Set) (Part No.GNAD637)
from
$55.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.
Product Features:
See More
Product Features:
- Application-specific formulations designed for extended pad life and clean wheels
- Multi-layer shim for near silent braking
- OE designed slots and chamfers for consistent performance
- Hardware included on popular and late-model applications
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD317)
from
$35.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Single layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-583)
from
$34.99
The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.
Product Features:
See More
Product Features:
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Positive mold technology for consistent wear and performance
- Thermal scorched pad surface for a fast break-in
- Chamfered and slotted to ensure noise-free braking
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Multi-Layer rubberized shims provide virtually noise-free braking
Akebono ProAct – Ceramic Brake Pads Ultra-Premium (Part No.ACT755)
from
$64.99
Product Features:
See More
- Made in the USA
- OE Manufacturer
- Ceramic Brake Pad
- Low Dust
- Powerful Quiet Stopping
- Ultra-Premium
- Perfect Upgrade for all Braking Systems
Carquest Premium Gold – Brake Pad Set – Gold Semi-Metallic (Part No.GMKD583)
from
$28.49
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.
Product Features:
See More
Product Features:
- Application-specific formulations designed for extended pad life and clean wheels
- Multi-layer shim for near silent braking
- OE designed slots and chamfers for consistent performance
- Hardware included on popular and late-model applications
Carquest Premium Gold – Semi-Metallic Brake Pads – (4-Pad Set) (Part No.GMKD755)
from
$51.99
CARQUEST Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet and clean braking. CQ Wearever Gold brake pads are also manufactured by leading brake pad suppliers that OEM and OES heritage. Trust CQ Wearev
Product Features:
See More
Product Features:
- Application-specific formulations designed for extended pad life and clean wheels
- Multi-layer shim for near silent braking
- OE designed slots and chamfers for consistent performance
- Hardware included on popular and late-model applications
Bosch – QuietCast Premium Brake Pads – w/ Hardware and Shims (Part No.N1010441262BOS)
from
$59.35
Bosch QuietCast Premium raises aftermarket brake pad technology to a whole new level. Employing the industry’s best pre-attached, rubber core shims and Molded Shim Technology (on selected applications), QuietCast delivers the quiet operation you and your customers expect with the durability and long life that are the hallmarks of all Bosch products. Every Bosch QuietCast Disc Brake Pad is fitted with the industry’s best pre-attached rubber core shim. This shim style is the most predominant type used by OE manufacturers and is exclusively offered by Bosch for the independent aftermarket.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct Fit application.
- OE style rubber-core shims
- Advanced, platform-specific Semi Metallic formulation
- Dedicated engineers source and rigorously test all friction materials and formulations
- Manufactured under the same exacting quality standards as OE components and system
- Powder-coated backing plate
- Rigorous physical and dynamometer testing
- Synthetic lubricant in box
- Pads individually wrapped Bosch Molded Shim Technology (MST)*** (On Select Applications)
- At the time of pressing, heat, adhesive and pressure mold the multi-layer shim to the backing plate and friction material creating an integrally molded unit.
- Shim stays attached throughout the life of the pad; won’t walk or slide on the backing plate
- Provides maximum stability resulting in quieter shim performance over the life of the pad
Popular 1981 Mazda 626 Brake Parts Categories
1981 Mazda 626 Brake Parts
You count on your 1981 Mazda 626 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 6 Brake Parts ranging in price from $11.99 to $99.99, you’re sure to find everything you need for your 1981 Mazda 626.
Brands matter. If you want to shop a specific Brake Parts brand, we stock 3 different brands like Cardone, Carquest, and Wearever. 1981 Mazda 626 Brake Parts start as low as $11.99!
One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 10 extensive product reviews on 1981 Mazda 626 Brake Parts.
Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1981 Mazda 626 below to get started!
Top-Rated Brake Parts Brands For Your 1981 Mazda 626
Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1981 Mazda 626 running right for years to come. In our inventory you’ll find brands like Cardone, Carquest, Wearever, and even more.
Popular Cardone Brake Parts
You’ll find popular Cardone brand products across Brake Master Cylinders. All are waiting to get your 1981 Mazda 626 back on the road. Some of the top-rated Cardone products in these categories are:
FAQs for 1981 Mazda 626 Brake Parts
What are the most purchased Brake Parts for the 1981 Mazda 626?
Out of 6 Brake Parts for the 1981 Mazda 626, the most popular in our inventory are:
