1981 Jeep J20 Wheels and Tires

Essential 1981 Jeep J20 Wheels and Tires

Dorman – 9/16-18 Serrated Wheel Stud – 0.625 In. Knurl, 2-1/8 In. Length (Part No.610-180)

9/16-18 Serrated Wheel Stud - 0.625 In. Knurl, 2-1/8 In. Length

from

$3.79
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:
  • Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
  • Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
  • Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Dorman – Wheel Stud: Serrated, 9/16-18 Thread Size, Right Hand Thread (Sold by each) (Part No.610-292)

Wheel Stud: Serrated, 9/16-18 Thread Size, Right Hand Thread (Sold by each)

from

$3.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:
  • Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
  • Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
  • Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece (Part No.33500-12)

Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece

from

$361.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:
  • MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
  • COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
  • FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
  • DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
  • COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)

Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece

from

$129.99
Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:
  • Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
  • Sensor must be programmed to specifi Y/M/M vehicle
  • Compatible with most programming tools
  • Make sure that your TPMS programming tool is updated to it’s latest version
  • Combines 314.9, 315 & 433 MHz application into one sensor
  • Future proofed to support new and pending OE system technologies
  • Optimizes inventory levels and returns
  • Reduces overal cost and increases speed of service
  • Use service kit 20018 to replace the rubber valve assembly
  • Valve Core Torque = 3.5 in-lbs (0.4 Nm)
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

McGard – Chrome Cone Seat Style Lug Nut Set (1/2"-20 Thread Size) – Set of 4 Lug Nuts (Part No.64000)

Chrome Cone Seat Style Lug Nut Set (1/2"-20 Thread Size) - Set of 4 Lug Nuts

from

$22.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
See More

Dorman – Wheel Lug Nut: 9/16-18 Thread, Conical 60, Bulge, 1.86" Length, Chrome, 24 Pack (Part No.712-544)

Wheel Lug Nut: 9/16-18 Thread, Conical 60, Bulge, 1.86" Length, Chrome, 24 Pack

from

$53.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:
  • Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
  • Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

McGard – Chrome Cone Seat Wheel Lock Set (1/2"-20 Thread Size) – Set of 4 Locks and 1 Key (Part No.24130)

Chrome Cone Seat Wheel Lock Set (1/2"-20 Thread Size) - Set of 4 Locks and 1 Key

from

$32.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
See More

McGard – Black Cone Seat Wheel Lock Set (1/2"-20 Thread Size) – Set of 4 Locks and 1 Key (Part No.24038)

Black Cone Seat Wheel Lock Set (1/2"-20 Thread Size) - Set of 4 Locks and 1 Key

from

$49.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
See More

Schrader – Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc (Part No.33700)

Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc

from

$51.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:
  • MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
  • COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
  • FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
  • DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
  • COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
  • ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.33500)

Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece

from

$41.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:
  • MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
  • COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
  • FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
  • DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
  • COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Driveworks – Taper Bearing Cone (Part No.S-387-A)

Taper Bearing Cone

from

$12.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Driveworks – Taper Bearing Cone (Part No.S-LM-104949)

Taper Bearing Cone

from

$11.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Driveworks – Oil Seal (Part No.S-471271)

Oil Seal

from

$3.29
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Driveworks – Oil Seal (Part No.S-416273)

Oil Seal

from

$2.99
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Omix – Wheel Bearing (Part No.16536.37)

Wheel Bearing

from

$148.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Crown Auto Jeep Replacmnt – For Use With Dana 35 Rear Axle Or 44 Rear Axle (Part No.83503064)

For Use With Dana 35 Rear Axle Or 44 Rear Axle

from

$64.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Improve The Performance
  • Easy Installation
See More

Dorman – Wheel Lug Nut: 9/16-18 Thread, Conical 60, Duplex Acorn, 2.362" Length, Chrome, 4 Pack (Part No.711-514)

Wheel Lug Nut: 9/16-18 Thread, Conical 60, Duplex Acorn, 2.362" Length, Chrome, 4 Pack

from

$28.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:
  • Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
  • Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Wheel Lug Nut: 9/16-18 Thread, Conical 60, Duplex Acorn, 1.87" Length, Chrome (Sold by each) (Part No.611-170)

Wheel Lug Nut: 9/16-18 Thread, Conical 60, Duplex Acorn, 1.87" Length, Chrome (Sold by each)

from

$3.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:
  • Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
  • Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Wheel Lug Nut: 9/16-18 Thread, Conical 60, Duplex Acorn, 1.872" Length, Chrome, 1 Pack (Part No.611-170.1)

Wheel Lug Nut: 9/16-18 Thread, Conical 60, Duplex Acorn, 1.872" Length, Chrome, 1 Pack

from

$3.79
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:
  • Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
  • Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

McGard – Black Bulge Cone Seat Wheel Installation Kit for 5 Lug Vehicles (1/2"-20 Thread Size) (Part No.84551)

Black Bulge Cone Seat Wheel Installation Kit for 5 Lug Vehicles (1/2"-20 Thread Size)

from

$134.99
The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
  • Set of 16 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch
See More

McGard – Chrome Bulge Cone Seat Wheel Installation Kit for 5 Lug Vehicles (1/2"-20 Thread Size) (Part No.84550)

Chrome Bulge Cone Seat Wheel Installation Kit for 5 Lug Vehicles (1/2"-20 Thread Size)

from

$104.99
The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
  • Set of 16 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch
See More

National – Multi Purpose Seal (Part No.455860)

Multi Purpose Seal

from

$19.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Bearings (Part No.28622)

Bearings

from

$17.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.25821)

Bearings

from

$11.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.18620)

Bearings

from

$19.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

1981 Jeep J20 Wheels and Tires

You count on your 1981 Jeep J20 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 45 Wheels and Tires ranging in price from $2.29 to $869.99, you’re sure to find everything you need for your 1981 Jeep J20.

Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 7 different brands like Schrader, Dorman, and National. 1981 Jeep J20 Wheels and Tires start as low as $2.29!

One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 81 extensive product reviews on 1981 Jeep J20 Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Bearings with 4.7 stars and Wheel Lug Nut: 9/16-18 Thread, Conical 60, Duplex Acorn, 1.875" Length, Chrome, 4 Pack with 3.5 stars.

Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 1981 Jeep J20 below to get started!

Top-Rated Wheels and Tires Brands For Your 1981 Jeep J20

Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1981 Jeep J20 running right for years to come. In our inventory you’ll find brands like Schrader, Dorman, National, and even more.

Popular Driveworks Wheels and Tires

You’ll find popular Driveworks brand products across Wheel Bearings and Wheel Seals. All are waiting to get your 1981 Jeep J20 back on the road. Some of the top-rated Driveworks products in these categories are:
Taper Bearing Cone
from $12.29
(1)
Taper Bearing Cone
Front Wheel Bearings
Oil Seal
from $3.29
(1)
Oil Seal
Front Wheel Seals

FAQs for 1981 Jeep J20 Wheels and Tires

What are the most purchased Wheels and Tires for the 1981 Jeep J20?

Out of 45 Wheels and Tires for the 1981 Jeep J20, the most popular in our inventory are:
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
from $51.99
This product is not rated
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
Remote Tire Pressure Sensors
Wheel Lug Nut: 9/16-18 Thread, Conical 60, Duplex Acorn, 1.872" Length, Chrome, 1 Pack
from $3.79
This product is not rated
Wheel Lug Nut: 9/16-18 Thread, Conical 60, Duplex Acorn, 1.872" Length, Chrome, 1 Pack
Custom Wheel Lug nuts

What are the top-rated 1981 Jeep J20 Wheels and Tires?

Top-rated Wheels and Tires for your 1981 Jeep J20 based on customer reviews/ratings are:
Bearings
from $20.99
(3)
Bearings
“Needed an inner bearing when doing brakes on an old hunting truck.I prefer quality parts over those made in other countries and the price difference w”
Wheel Lug Nut: 9/16-18 Thread, Conical 60, Duplex Acorn, 1.875" Length, Chrome, 4 Pack
from $8.49
(2)
Wheel Lug Nut: 9/16-18 Thread, Conical 60, Duplex Acorn, 1.875" Length, Chrome, 4 Pack
“I would buy again but each time there is only ever one pack in the store at a time”