1981 Jeep CJ7 Differentials

Essential 1981 Jeep CJ7 Differentials

Yukon Gear – Pinion Install Kit For Dana 30 Front Differential (Part No.13016)

Pinion Install Kit For Dana 30 Front Differential

from

$159.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits standard rotation Dana Spicer 30
  • Included are pinion bearings and races, pinion seal, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Steel Cover For Dana 44 Standard Rotation (Part No.32319)

Steel Cover For Dana 44 Standard Rotation

from

$129.99
Product Features:
  • Fits standard rotation Dana Spicer 44
  • Steel
See More

Yukon Gear – Zip Locker Bulkhead Fitting (Part No.34001)

Zip Locker Bulkhead Fitting

from

$27.99
Product Features:
  • Bulkhead fitting
See More

Yukon Gear – Dana 30 Side Gear Thrust Washer (Part No.33284)

Dana 30 Side Gear Thrust Washer

from

$10.99
Dana 25, Dana 27, & Dana 30 side gear Thrust washer.

Product Features:
  • Side gear thrust washer for Dana Spicer 25, 27, 30 and AMC Model 35
  • 1.560″ I.D.
  • Fits standard open differentials only
See More

Omix – Master Rebuild Kit (Part No.16501.01)

Master Rebuild Kit

from

$364.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Incl. Bearings; Seal; Shim Set; Hardware
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)

Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement

from

$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.

Product Features:
  • Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
See More

Motive Gear – Differential Carrier Gear Kit (Part No.706027XR)

Differential Carrier Gear Kit

from

$102.99


Product Features:
  • DANA-44 OPEN INTERNAL KIT
See More

Omix – Transfer Case Yoke Oil Seal (Part No.18674.11)

Transfer Case Yoke Oil Seal

from

$4.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • OE Style
  • Direct Fit
  • Sold Individually
  • Limited 5 Year Warranty
See More

Yukon Gear – O-Ring For Toyota & Dana 44 Zip Locker Seal Housing (Part No.34004)

O-Ring For Toyota & Dana 44 Zip Locker Seal Housing

from

$11.29
Product Features:
  • O-ring for seal housing
  • Fits Dana Spicer 44 and Toyota 8″ and V6
See More

Yukon Gear – Replacement Standard Open Carrier Case For Dana 30, 3.73 & Up (Part No.20026)

Replacement Standard Open Carrier Case For Dana 30, 3.73 & Up

from

$164.99
Yukon replacement standard open carrier case for Dana 30, 3.73 & up, 1.943″ tall. If purchasing this case for a D30 JK front, you will need to also purchase spider gear set YPKD30-S-27.

Product Features:
  • Standard open carrier case
  • Fits Dana Spicer 30
  • 3.73 and up ratio only
  • Does not include spider gears
See More

Motive Gear – Ring Gear Bolt (Part No.D8OZ4216B)

Ring Gear Bolt

from

$1.99


Product Features:
  • BOLT 9″ FORD OPEN R.G. SAME AS M-4216A200
See More

USA Standard Gear – Spartan Locker Replacement Cross Pin For Dana 44 (Part No.17017)

Spartan Locker Replacement Cross Pin For Dana 44

from

$46.99
Product Features:
  • USA Standard Gear heavy-duty cross pin shaft
  • Fits Dana Spicer 44
  • Works with Spartan Locker or standard open spider gears
See More

Yukon Gear – Dana 44 Steel Spool Replacement (Part No.32168)

Dana 44 Steel Spool Replacement

from

$314.99
Yukon Performance steel spool for Dana 44 with 30 spline axles. fits 3.73 and down. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler Dana Spicer 44 with 30 spline axles
  • 3.73 and down ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Motive Gear – Differential Ring and Pinion (Part No.D44-589)

Differential Ring and Pinion

from

$223.99


Product Features:
  • DANA 44 R&P 5:89 RATIO STD CUT
See More

Pro-King – Pinion Seal (Part No.720A070)

Pinion Seal

from

$4.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Pro-King – Crush Sleeve (Part No.721A034)

Crush Sleeve

from

$2.89
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Crown Auto Jeep Replacmnt – OE Replacement (Part No.J0914802)

OE Replacement

from

$11.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

Yukon Gear – Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50 (Part No.33002)

Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50

from

$4.99
Product Features:
  • Oil baffle for Dana Spicer 30, Dana Spicer 44 IFS, Dana Spicer 50, AMC Model 35 IFS
See More

Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)

Tapered Cup Wheel Bearing Assembly

from

$8.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size (Part No.41019)

Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size

from

$146.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 30 and 44
  • 26 spline
  • 1330 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.062″ cap diameter
  • Strap style
See More

Pro-King – Differential Bearing Cone (Part No.742G255)

Differential Bearing Cone

from

$19.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)

Differential Pinion Solid Spacer Kit w/Shims

from

$22.79


Product Features:
  • FORD 9″ SOLID SPACER KIT
See More

Yukon Gear – Bearing Race Driver (Part No.56006)

Bearing Race Driver

from

$215.99
Bearing race driver for Dana 44 rear. (TK 31520) No return.

Product Features:
  • Bearing race driver
  • Fits 31520 race
  • All steel construction
See More

Omix – Differential Cover Gasket (Part No.16502.02)

Differential Cover Gasket

from

$5.49
Is your Jeep differential cover leaking? Do you need to seal it up after some work? Omix-ADA has the OE quality differential gaskets you need.

Product Features:
  • Rubber
  • Sold Individually
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)

Dana 30 / 44 Roll Pin Replacement

from

$12.99
Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.

Product Features:
  • Roll pin for Dana Spicer 30 and Dana Spicer 44
  • 0.235″ diameter
See More

Yukon Gear – Replacement Cover Gasket For Dana 30 (Part No.23003)

Replacement Cover Gasket For Dana 30

from

$12.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 30
See More

Omix – Axle Oil Seal (Part No.16535.03)

Axle Oil Seal

from

$4.49
Do you have a gear oil leak around your axle shaft? Worried you could run low on gear oil and ruin the axle? Omix-ADA offers high-quality replacement axle seals to keep the gear lube inside the axle where it belongs.

Product Features:
  • Inner
  • Left/Right Side
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

USA Standard Gear – Open Spider Gear Set For Dana Spicer 44, 30 Spline (Part No.39006)

Open Spider Gear Set For Dana Spicer 44, 30 Spline

from

$203.99
Product Features:
  • Spider gear kit
  • Fit Dana Spicer 44 open differential with 30 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Popular 1981 Jeep CJ7 Differentials Categories

1981 Jeep CJ7 Differentials

Maybe you’re in the middle of a full rebuild of that 1981 Jeep CJ7. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 228 different Differentials in our inventory ranging from $1.49 to $1,435.00. That means you can find the exact parts or products you need to keep that 1981 Jeep CJ7 running smoothly.

Differentials are only as good as their brand. We stock 16 different brands to make sure you have plenty of trusted parts to choose from for your 1981 Jeep CJ7. Valvoline, National, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1981 Jeep CJ7, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,530 reviews in this category, some of the top rated parts include Axle Housing Cover Gasket with 4.7 stars and Bearings with 4.5 stars.

So if you’re in the market for aftermarket Differentials to keep your 1981 Jeep CJ7 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1981 Jeep CJ7 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1981 Jeep CJ7 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your CJ7 the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 1981 Jeep CJ7 Differentials

What are the most purchased Differentials for the 1981 Jeep CJ7?

Out of 228 Differentials for the 1981 Jeep CJ7, the most popular in our inventory are:
Tapered Cone/Cup Wheel Bearing Set
from $13.99
(14)
Tapered Cone/Cup Wheel Bearing Set
Differential Bearings
3 Qt - Penzoil 80W90 Conventional Gear Oil
from $44.99
This product is not rated
3 Qt – Penzoil 80W90 Conventional Gear Oil
Differential Oil
Bearings
from $15.99
(9)
Bearings
Front Differential Pinion Bearings

What are the top-rated 1981 Jeep CJ7 Differentials?

Top-rated Differentials for your 1981 Jeep CJ7 based on customer reviews/ratings are:
Axle Housing Cover Gasket
from $6.79
(9)
Axle Housing Cover Gasket
“Felpro gaskets are #1 in my book. Awesome products from Felpro, I highly recommend!”
Bearings
from $9.99
(8)
Bearings
“Fit like a glove. Sealed up the diff like mighty putty on steroids”
Bearings
from $6.99
(6)
Bearings
“perfect fit”