1981 Ford E-350 Econoline Suspension Parts

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Rubber or Heat Treated bushings
• No Squeak
• Reduces vibration

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Rubber or Heat Treated bushings
• No Squeak
• Reduces vibration

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

• Protects the shock’s piston rod from damage
• Universal design for easy installation
• Tie-strap included for a secure fit
• Constructed from high quality urethane for maximum durability
• Multiple color choices available

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

The Monroe® Magnum RV shock absorber utilizes advanced technology, combining a gas charge and full displaced valving for superior RV performance.

Product Features:

• Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly
• They offer superior comfort for normal driving and deliver extra control when operating conditions get more demanding
• Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
• Loop welding technique Resistance weld with additional 360-degree weld to provide up to 9,000 lbs (4,082 kg) tensile strength for maximum durability – when required
• 1-3/8-inch (35 mm) Bore Larger bore than most shocks to provide more efficient and consistent control
• 2-inch or 2-3/8-inch (50.8 mm or 60.3 mm) reserve tube More fluid for more consistent performance – when required
• 5/8-inch (16 mm) diameter piston rod Nitrocarburized design more environmentally friendly, maintaining chrome structural benefits, without affecting durability or use life of the rod.
• Sintered iron design allows for more precise piston dimensions, requiring no additional components for exceptional fit – on most applications
• Multi-lip fluid seal designed for smooth performance, long life and reduced friction
• Assist in maintaining ride height when up to 1,200 lbs of additional weight is loaded
• Adjust rapidly to changing road and weight conditions, delivering enhanced control with uncompromised ride comfort

The Monroe® Magnum RV shock absorber utilizes advanced technology, combining a gas charge and full displaced valving for superior RV performance.

Product Features:

• Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly
• They offer superior comfort for normal driving and deliver extra control when operating conditions get more demanding
• Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
• Loop welding technique Resistance weld with additional 360-degree weld to provide up to 9,000 lbs (4,082 kg) tensile strength for maximum durability – when required
• 1-3/8-inch (35 mm) Bore Larger bore than most shocks to provide more efficient and consistent control
• 2-inch or 2-3/8-inch (50.8 mm or 60.3 mm) reserve tube More fluid for more consistent performance – when required
• 5/8-inch (16 mm) diameter piston rod Nitrocarburized design more environmentally friendly, maintaining chrome structural benefits, without affecting durability or use life of the rod.
• Sintered iron design allows for more precise piston dimensions, requiring no additional components for exceptional fit – on most applications
• Multi-lip fluid seal designed for smooth performance, long life and reduced friction
• Assist in maintaining ride height when up to 1,200 lbs of additional weight is loaded
• Adjust rapidly to changing road and weight conditions, delivering enhanced control with uncompromised ride comfort

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Engineered to provide long life and dependability
• Construction and design validated by MOOG engineers
• Incorporates proven design and engineering features
• Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Engineered to provide long life and dependability
• Construction and design validated by MOOG engineers
• Incorporates proven design and engineering features

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Engineered to provide long life and dependability
• Construction and design validated by MOOG engineers
• Incorporates proven design and engineering features

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Engineered to provide long life and dependability
• Construction and design validated by MOOG engineers
• Incorporates proven design and engineering features
• Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

Get ahead of fatigued or rusted leaf spring shackles before they become dangerous. Made of sturdy steel with a power coated finish to resist corrosion, this leaf spring shackle is a direct replacement for your vehicle’s stock shackle.

Product Features:

• Direct replacement – This leaf spring shackle fits and performs like original equipment shackle
• Quality construction – manufactured from durable steel and powder coated for corrosion resistance and a long service life
• Excellent value – original equipment quality at a lower price
• Ready to install – all essential hardware is included for an easy installation

The shock that started it all! Rancho® RS5000 series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000 is ideal for on and off-road use, at an affordable price.

Product Features:

• Ten-stage velocity sensitive valving – Provides tuning specific for each vehicle
• 5/8-in. (16mm) diameter piston rod (select applications) – Adds strength and durability. Size varies by application.
• 1 3/8-in. (35mm) diameter piston (select applications) – Ensures performance in any environment
• Protective boot included – Protects the shock rod and oil seal

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

• Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
• Gas-charged unit
• Improved handling and control
• Economical OE replacement
• Meets OE product specifications

Designed for midsize and full-size trucks and vans, Monroe® Gas-Magnum® shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:

• DESIGNED FOR TRUCKS AND VANS — Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
• BUILT TO LAST — Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
• CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
• IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
• LONGER SERVICE LIFE — Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
• Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
• Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

• Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
• Gas-charged unit
• Improved handling and control
• Economical OE replacement
• Meets OE product specifications

The KYB MonoMax performance direct fit shock absorber is designed for light trucks, vans, and SUV’s, including some lifted and lowered vehicles. Maximum control for trucks and SUV’s – stronger, more durable truck shock. The KYB MonoMax is a stronger, more durable heavy duty truck shock that is engineered for harsh road conditions as well as heavy hauling, towing, or plowing.

Product Features:

• Direct fit application for ease of installation
• The right choice for hauling, towing, or plowing
• The best performer on harsh road conditions
• Perfect for diesel trucks
• Applications for light trucks, vans, and SUV’s, including some lifted and lowered vehicles

Tough conditions demand tough truck shocks. The large bore KYB MonoMax provides the additional stability that heavier, more powerful or high center of gravity vehicles demand. The KYB MonoMax is a heavy duty monotube shock absorber that provides the most handling, control and durability of any KYB shock; and its just for trucks. The MonoMaxs tough design automatically adjusts to driving conditions with fade-free performance. The KYB MonoMax has an outstanding reputation for vehicles that do real work, go off-road, tow a trailer or haul heavy loads. It uses a work-ready, zinc-coated steel piston ring and includes an off-road dust boot.

Product Features:

• Maximum Performance Upgrade With Up To 40% More Damping Performance Than Standard Shock Absorbers
• Perfect Solution When You Need To Upgrade Suspension Performance On Your Ford Truck
• Truck Monotube Design Outperforms All Other Standard Shock Absorbers
• Zinc-Coated, Stainless Steel Piston Ring Provides A Positive Seal In The Most Extreme Conditions
• Rubber Boot To Protect The Shaft And Keep Dirt And Debris Away From The Seals
• Engineered To Help Vehicles With Electronic Safety Systems (Esc, Abs, Etc.)

The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:

• Adds Up To 25% More Damping Performance Over Original Equipment Shocks
• Components And Valving Designed Specifically For Ford Vans
• Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
• High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
• Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
• The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
• Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.

The KYB Gas-a-just monotube truck shock absorber has additional performance advantages over the twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The Gas-a-Just is available as an OE monotube replacement and as an OE twin-tube performance upgrade. The KYB Gas-a-Just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:

• Adds Up To 25% More Damping Performance Over Original Equipment Shocks
• Components And Valving Designed Specifically For Heavy Duty Trucks
• Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
• High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
• Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
• The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
• Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

• Protects the shock’s piston rod from damage
• Universal design for easy installation
• Tie-strap included for a secure fit
• Constructed from high quality urethane for maximum durability
• Multiple color choices available