1981 Ford E-100 Econoline Drive Shafts and Axles

More 1981 Ford E-100 Econoline Drive Shafts and Axles

Find your specific 1981 Ford E-100 Econoline original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1981 Ford E-100 Econoline Drive Shafts and Axles

Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)

R1559Tv Rear Axle Bearing And Seal Kit

from

$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • Torrington Brand
  • 2.530″ O.D.
  • 1.620″ I.D.
See More
View Product

Yukon Gear – Tapered Axle Bearing And Seal Kit, 3.150" Od, For 9" Ford (Part No.10058)

Tapered Axle Bearing And Seal Kit, 3.150" Od, For 9" Ford

from

$114.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Tapered axle bearing and seal kit, 3.150″ OD, for 9″ Ford. This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing and seal kit for Ford 9″ rear
  • Includes axle bearing and seal
  • Tapered roller design
  • 3.150″ O.D.
  • 1.562″ I.D.
  • Services one side
See More
View Product

Yukon Gear – Fill Plug For Ford 9", 1/2" Thread (Part No.33539)

Fill Plug For Ford 9", 1/2" Thread

from

$10.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Fill plug
  • Fits Ford 9″
See More
View Product

Yukon Gear – Outer Axle Seal For Set 20 Bearing (Part No.30030)

Outer Axle Seal For Set 20 Bearing

from

$14.99
Outside seal (included in TK set20).Yukon Mighty seal.

Product Features:
  • Outer axle seal
  • Works with Set20 bearing
See More
View Product

Yukon Gear – Axle Seal, For 1559 Or 6408 Bearing (Part No.30201)

Axle Seal, For 1559 Or 6408 Bearing

from

$7.99
Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.

Product Features:
  • Rear axle seal
  • 2.530″ O.D.
See More
View Product

Dorman – Help – Driveshaft Flange Bolts (Part No.80992)

Driveshaft Flange Bolts

from

$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

(1 reviews)
View Product

Yukon Gear – Wheel Lug Stud (Part No.33571)

Wheel Lug Stud

from

$7.99
Wheel Lug Stud

(1 reviews)
View Product

Yukon Gear – Replacement Axle Stud For Dana 44 & Model 35 (Part No.33171)

Replacement Axle Stud For Dana 44 & Model 35

from

$5.99
Product Features:
  • Rear axle stud for Dana Spicer 44 and AMC Model 35
  • 1/2″ x 20 thread
  • 0.618″ knurl diameter
  • 1 15/32″ long
  • 31/64″ shoulder length
See More
View Product

Felpro – Drive Axle Shaft Flange Gasket (Part No.55065)

Drive Axle Shaft Flange Gasket

from

$4.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More
View Product

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size (Part No.41019)

Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size

from

$145.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 30 and 44
  • 26 spline
  • 1330 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.062″ cap diameter
  • Strap style
See More
View Product

Yukon Gear – 1.250" Pinion Adaptor Sleeve (Stock Pinion Into Large Support) (Part No.32239)

1.250" Pinion Adaptor Sleeve (Stock Pinion Into Large Support)

from

$63.99
1.250″ pinion adaptor sleeve (stock pinion into large support).

Product Features:
  • Adapter sleeve
  • Fits Ford 9″
  • Adapts 28 spline pinion into 35 spline pinion support
See More
View Product

National – Shaft Repair Sleeve (Part No.99112)

Shaft Repair Sleeve

from

$36.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More
View Product

Yukon Gear – Axle Bearing For 9" Ford, 3.150" O.D. (Part No.10062)

Axle Bearing For 9" Ford, 3.150" O.D.

from

$128.99
F9″ Large sealed able bearing , ID = 1.562″ OD = 3.150″ w/Outer O-ring (no Inner seal required) . This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing for Ford 9″
  • Sealed design
  • 3.150″ O.D.
  • 1.562″ I.D.
  • Services one side
See More
View Product

Yukon Gear – Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing (Part No.18046)

Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing

from

$83.99
Conversion bearing for small bearing Ford 9″ axle in large bearing housing.

Product Features:
  • Axle bearing
  • Fits Ford 9″
  • Conversion bearing to install small bearing axle into large bearing housing
  • 3.150″ O.D.
  • 1.377″ I.D.
See More
View Product

Yukon Gear – Axle Bearing Retainer Plate For Dana 44 TJ Rear (Part No.33472)

Axle Bearing Retainer Plate For Dana 44 TJ Rear

from

$19.99
Product Features:
  • Axle bearing retainer for Jeep TJ rear with Dana Spicer 44
  • 3/8″ bolt holes
  • 1 5/8öx3 3/16ö bolt pattern
See More
View Product

Yukon Gear – Axle Bearing Retainer For Dana 44 Rear In Jeep TJ (Part No.33546)

Axle Bearing Retainer For Dana 44 Rear In Jeep TJ

from

$28.99
Product Features:
  • Bearing retainer
  • Fits Dana Spicer 44 in Jeep TJ
  • 1 5/8″ x 3 3/16″ bolt pattern
  • 3/16″ bolt holes
See More
View Product

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2018
  • Weight approx: 3 Lbs
  • BEARING ID / BORE: 1.3780 INCH / 35 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • COMPLETE MOUNT
See More

(13 reviews)
View Product

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2018
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.48 INCH / 63 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • NOT PICTURED: TWO DUST SHIELDS
See More

(1 reviews)
View Product

Yukon Gear – Adaptor Washer For 28 Spline Pinion In Oversize Support, For 9" Ford (Part No.32240)

Adaptor Washer For 28 Spline Pinion In Oversize Support, For 9" Ford

from

$58.99
Adaptor washer for 28 spline pinion in oversize support, for 9″ Ford.

Product Features:
  • Adapter washer
  • Fits Ford 9″
  • Adapts 28 spline pinion into 35 spline pinion support
See More
View Product

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(4 reviews)
View Product

National – Bearings (Part No.M88048)

Bearings

from

$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(9 reviews)
View Product

National – Multi Purpose Bearing (Part No.HB-88107-A)

Multi Purpose Bearing

from

$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(25 reviews)
View Product

National – Multi Purpose Bearing (Part No.HB-88508-A)

Multi Purpose Bearing

from

$73.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(17 reviews)
View Product

National – Multi Purpose Bearing (Part No.HB-88508)

Multi Purpose Bearing

from

$55.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

1981 Ford E-100 Econoline Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1981 Ford E-100 Econoline. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 21 different Drive Shafts and Axles in our inventory ranging from $4.29 to $128.99. That means you can find the exact parts or products you need to keep that 1981 Ford E-100 Econoline running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1981 Ford E-100 Econoline. National, Anchor, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1981 Ford E-100 Econoline, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1981 Ford E-100 Econoline rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1981 Ford E-100 Econoline Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1981 Ford E-100 Econoline demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your E-100 Econoline the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Dorman – Help Drive Shafts and Axles

We carry Dorman – Help parts in our stock across Drive Shaft Support Bolts categories, plus more. For a 1981 Ford E-100 Econoline, our most popular Dorman – Help Drive Shafts and Axles include:
Driveshaft Flange Bolts
from $20.29
(1)
Driveshaft Flange Bolts
Drive Shaft Support Bolts

Top 1981 Ford E-100 Econoline Drive Shafts and Axles from National

National products are another trusted brand when it comes to Drive Shafts and Axles for your 1981 Ford E-100 Econoline. Popular National parts include:
Multi Purpose Bearing
from $44.99
(25)
Multi Purpose Bearing
Drive Shaft Center Supports
Multi Purpose Bearing
from $73.99
(17)
Multi Purpose Bearing
Drive Shaft Center Supports
Bearings
from $15.99
(9)
Bearings
Drive Shaft Bearings

More Popular Parts for All Makes