1981 Buick Estate Wagon Performance and Racing Products

Below you will find various in-demand Buick Performance and Racing Products, components and accessories for your 1981 Estate Wagon. Advance Auto Parts has popular Estate Wagon parts like Performance Steering Products, Performance Engines, Performance Ignition Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Estate Wagon model years including 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979 and more. Select a category of 1981 Buick Estate Wagon Performance and Racing Products below and start saving instantly.

Popular 1981 Buick Estate Wagon Performance and Racing Products Categories

Performance Carburetors

Performance Engine Coolant Thermostats

Performance Intake Manifolds

Performance Coils

Performance Distributor Cap and Rotor Kits

Performance Shifters

Performance Engine and Transmission Mounts

Performance Water Outlets

Performance Radiator Caps

Performance Distributor Rotors

Performance Differential Covers

Performance Front Shock and Struts

Performance Distributor Components

Performance Coil Spring Insulators

Performance Chassis Bushing Kits

Performance Posi Units and Components

Performance Oil Pans

Performance Upper Performance Control Arm Bushings

Performance Distributor Caps

Performance Engine Camshafts

Performance Ring and Pinions

Performance Ignition Parts

Performance Sway Bar Link Kits

Performance Lower Control Arm Bushings

Performance Brake Bleeders

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Ball Joint Boots

Performance Nitrous Systems

Nitrous Oxide Injection System Kit

Performance Torque Converters

Performance Transmission Rebuild Kits

Performance Rear Shock and Struts

Essential Performance and Racing Products for 1981 Buick Estate Wagons

from

$40.99

Brake Bleeder Screws

from

$106.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$104.99

The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.

Product Features:

Excellent Weight Transfer
Lets Front End Down Quickly
Maximum Traction
Makes Vehicle Safer
Easier Control At End Of Track
Better Overall Stability

from

$684.99

Product Features:

Designed For Carbureted V6 And V8 Engines
Use With Single Or Dual Plane Manifolds
Power Increases From 50 to 100 HP
Plate Systems are Easy to Install
Precision EDM Machined Spray Bars Maximize Flow
Option of Silver Powder Coated or Polished Bottle
Recommend Ignition Retard ; Upgraded Fuel System
Requires Use of Premium Fuel

from

$25.99

These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes sixteen (16) 3/8 inch-16 x 1-1/4 inch bolts & washers

Product Features:

Zinc plated Grade 5 steel
Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
Ideal For Minimal Space
12-Point Head And Flange
Zinc Plated For Protection

from

$30.99

Wiring Harness and CapacitorPremium quality wire harness and capacitor insure good connection and “static free” operation.

Product Features:

PerTronix D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor
Premium quality wire harness and capacitor.

from

$49.49

The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.

Product Features:

Stock GM HEI replacement distributor cap
Red

from

$17.49

The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.

Product Features:

Ideal For Tight Spaces
Serrations Prevent Loosening
Flange Distributes Pressure
Zinc Plated Bolts
Grade 5 Material
Easy Installation

from

$389.99

RngPnn

from

$10.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Lasts Longer
Looks Great

from

$499.99

HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$26.99

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 180 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$548.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$111.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$26.99

Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.

Product Features:

Made from HYPER-Flex Polyurethane
Allows Vehicle to Work At Maximum Efficiency
Easy to Install
Superior Performance and Greater Longevity
Lasts Much Longer Than OEM Rubber End Links

from

$48.49

Product Features:

Heavy Duty Cap and Rotor Kit
With Brass Inserts

from

$84.99

Constructed of durable polyurethane to handle the stress oh high horsepower. Absorbs vibration and lasts longer than rubber Features unique built-in safety lock to keep from separating under high torque loads. Ideal for use on street or strip applications. Complete with grade-8 mounting hardware.

Product Features:

Durable Polyurethane
Absorbs Vibration
Last Longer Than Rubber
Built-In Safety Lock

from

$65.99

Add some bling to the underside of your car with Mr. Gasket’s chrome differential cover. This chrome-plated steel cover is made to fit GM 10-bolt with 8 1/2 in ring gear. Is a complete kit with a gasket and bolts.

Product Features:

Made Of Chrome Plated Steel
Fits GM 8.5-Inch 10 Bolt
Complete Kit With Gasket And Bolts

from

$13.29

Replacement rotor for Chevrolet HEI style distributors.

Product Features:

For HEI distributors
Resist carbon tracking
Low resistance brass
Max voltage transfer
Molded from insulated material

from

$85.29

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$409.99

These kits include all of the necessary components to rebuild your automatic transmission. OEM style gaskets included. Kits do not include overhaul instructions – please refer to factory shop manual for proper assembly procedures.

Product Features:

Complete High Perf. Or Racing Trans. Overhaul
Includes Only OEM Valvebody Gaskets
Instructions Not Included

from

$830.99

Product Features:

Designed For Carbureted V8 Engines
Enhanced Flow Capacity
Softens The Hit Of The Nitrous System
Simple To Install

from

$27.49

Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.

Product Features:

Complete with o-rings and mounting bolts
Features an o-ring style seal to prevent water leaks
Chrome plated
1/2″ NPT port can be used for various coolant temp related sensors or switches

from

$105.99

Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

Product Features:

Oil Filled For Better Cooling
Optimized Low Resistance
Silicon Magnetic Steel E-Core
Higher Energy/Voltage Outputs
Quicker Starts
Improved Idle Quality
Resists Shock And Vibration
Resists Corrosion

from

$12.99

Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:

Made of Superior Hyper-Flex+ Material
Lasts from 3 to 10 Times Longer
Assemble to Chassis Same Way as OEM
Maintains Factory Ride Characteristics
Simple Way to Increase Vehicle Height

from

$451.99

The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Manual Choke
4 Barrel Count
Square Bore
Smooth Secondary Transition
Both Timed and Full Vacuum Ports
Includes PCV Outlet

from

$368.99

The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$104.99

The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.

Product Features:

Excellent Weight Transfer
Lets Front End Down Quickly
Maximum Traction
Makes Vehicle Safer
Easier Control At End Of Track
Better Overall Stability

Upgrade your 1981 Buick Estate Wagon with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1981 Buick Estate Wagon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Performance and Racing Products are key to keeping your Estate Wagon functioning at its best. At Advance Auto Parts, we offer a wide selection of 96 Performance and Racing Products for the 1981 Buick Estate Wagon, designed to meet your needs without breaking the bank. From Performance Steering Product replacements to Performance Engines upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1981 Buick Estate Wagon at great prices. Our Performance and Racing Products inventory for this model ranges from just $9.99 to $1,138.99, with an average price of $303.66. Our 96 Performance and Racing Products in stock come from 16 trusted brands, so you’re sure to find the right part for your 1981 Buick Estate Wagon without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1981 Buick Estate Wagon, we stock popular OEM and aftermarket Performance and Racing Products from top names like MSD Ignition, Mr. Gasket, Energy Suspension, and more. MSD Ignition Performance and Racing Products start at just $13.29 and boast an impressive 4 stars average rating from customers. Mr. Gasket and Energy Suspension also bring quality to the table, with Performance and Racing Products available starting at $9.99, and at an average 4 stars rating. With 135 customer reviews and counting, our 1981 Buick Estate Wagon Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1981 Buick Estate Wagon is always ready to roll. We’re committed to providing you with everything you need to keep your Estate Wagon in top shape, all in one place. Start shopping confidently below for your 1981 Buick Estate Wagon!

Best-Selling Performance Steering Products for 1981 Buick Estate Wagons

Enhance the driving experience in your Buick with 2 quality Performance Steering Product components, starting at $9.99.

show more show less

from

$26.99

Made from HYPER-Flex Polyurethane
Allows Vehicle to Work At Maximum Efficiency
Easy to Install
Superior Performance and Greater Longevity
Lasts Much Longer Than OEM Rubber End Links

from

$9.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

Most Popular 1981 Buick Estate Wagon Performance Engines

Customize your Buick with 12 Performance Engines products like Performance Intake Manifolds, Performance Engine Coolant Thermostats, and Performance Water Outlets, all priced under $825.99.

show more show less

from

$499.99

Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer
Washer Between Turbine and Cover

from

$339.99

Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$26.99

Opens At 180 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$463.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 deg. Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal if Correct Carburetor Used

from

$26.99

Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.

Product Features:

Fits Oldsmobile 330, 350, 425 and 455 engines
Chrome plated
Bolts included
Designed for OEM fit
Easy to install
O-ring/gasket not included

from

$299.99

Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$825.99

HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine
Dual Pattern Drive Lugs
New Turbine Hub
New Springs/Rollers In Stator

from

$665.99

Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:

3400-3800 RPM
Small And Big Blocks
Serious Performance
Furnace Brazed
Fully Balanced

from

$548.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$499.99

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$337.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$324.99

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

Top Picks for 1981 Buick Estate Wagon Performance Ignition Products

Upgrade Buick Estate Wagons with top-quality Performance Ignition Products parts, including 7 OEM and aftermarket selections for your 1981 model.

show more show less

from

$100.99

Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Product Features:

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Standard Motor Products SMP Dr-31
MSD 8225

from

$112.99

HEI owners now have a choice to replace their stock coil with the MSD high energy unitized coil for GM HEI distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI module, PN 83645. The coil features special low induc?tance, high temperature windings which charge faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.

Product Features:

Direct performance replacement for GM HEI coil-in-cap dist.
70:1 Turns Ratio
Lower Primary Resistance Produces High Voltage Output
Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module

from

$85.29

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$113.99

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Similar to Standard Motor Products SMP Dr-32
Long Life And Great Looks

from

$30.49

Product Features:

Service Part
Makes Connections Quick And Easy

from

$186.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

from

$72.99

Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.

Product Features:

Externally mounted coil
Increases reliability
Increase performance
High quality plastic
Resist spark loss
Use brass conductors
Low resistance connections
No modifications

In-Demand Performance Fuel Systems for 1981 Buick Estate Wagons

Select from 1 premium Performance Fuel Systems parts for your 1981 Buick Estate Wagon.

show more show less

from

$435.99

The Edelbrock 1404 Performer Series 500 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Manual Choke
4 Barrel Count
Square Bore
Smooth Secondary Transition
Both Timed and Full Vacuum Ports
Includes PCV Outlet

Most Sold 1981 Buick Estate Wagon Performance Distributors

Explore our best-selling Buick parts for the 1981 Estate Wagon among 5 OEM and aftermarket options starting from $13.29.

show more show less

from

$26.99

Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.

Product Features:

PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
Precision machined chromoly weights and center plate.

from

$49.49

Stock GM HEI replacement distributor cap
Red

from

$46.49

The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:

Designed w/Performance In Mind
High Quality Material
Stainless Terminals
Performance replacement part

from

$30.99

Wiring Harness and CapacitorPremium quality wire harness and capacitor insure good connection and “static free” operation.

Product Features:

PerTronix D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor
Premium quality wire harness and capacitor.

from

$13.29

Replacement rotor for Chevrolet HEI style distributors.

Product Features:

For HEI distributors
Resist carbon tracking
Low resistance brass
Max voltage transfer
Molded from insulated material

Top-Rated Performance and Racing Products Brands For Your 1981 Buick Estate Wagon

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1981 Buick Estate Wagons. Below you’ll find some of our best rated Performance and Racing Products from MSD Ignition, Mr. Gasket, and Energy Suspension, and more. Performance and Racing Products from these brands that fit a 1981 Estate Wagon start at just $9.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular MSD Ignition 1981 Buick Estate Wagon Performance and Racing Products

When it comes to maintaining or upgrading your 1981 Buick Estate Wagon, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. MSD Ignition ticks all of those boxes. We offer a wide selection of MSD Ignition Performance and Racing Products, specifically designed for the 1981 Buick Estate Wagon. With over 5 MSD Ignition brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $13.29, with an average price of just $59.05. Plus, with over 51 customer reviews and an average rating of 4 stars, you can trust that our MSD Ignition Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$13.29

This product is not rated

Rotor; GM HEI

“”

from
$72.99

This product is not rated

Mod HEI Dust Cover, V8 & Odd Fire V6

“”

from
$112.99

(1)

High Energy Ignition Coil for GM HEI Distributors

“MSD ‘gets it’.”

Popular Mr. Gasket 1981 Buick Estate Wagon Performance and Racing Products

Mr. Gasket auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1981 Buick Estate Wagon owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1981 Estate Wagon, Advance Auto Parts carries a full inventory of 5 Mr. Gasket Performance and Racing Products. Plus you will be keeping your Buick in peak condition while saving money because prices on these Mr. Gasket Performance and Racing Products range from $17.49 to $65.99, plus, with more than 22 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from
$48.09

This product is not rated

Thermocap Radiator Cap

“”

from
$17.49

This product is not rated

Oil Pan Bolt Kit

“”

from
$64.99

This product is not rated

Differential Cover Kit

“”

FAQs for 1981 Buick Estate Wagon Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1981 Buick Estate Wagons?

Out of 96 Performance and Racing Products that fit 1981 Buick Estate Wagons, the following parts are the top sellers:

High Performance 180 Degree Thermostat for Increased Flow (17360033) – $26.99
High Performance Sway Bar End Link Kit with Hardware (16360004) – $26.99
Tie Rod Dust Boot (17360821) – $9.99

What’s the price range for 1981 Buick Estate Wagon Performance and Racing Products?

Performance and Racing Product prices for the 1981 Buick Estate Wagon start at $9.99 and go up to $1,138.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1981 Buick Estate Wagon?

The average price for Performance and Racing Products for the 1981 Buick Estate Wagon is $303.66. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Buick Estate Wagon model years?

Yes, we currently carry Performance and Racing Products for 16 model years of Buick Estate Wagons between 1959 and 1979. Performance and Racing Products are bought most frequently for the following model years: 1979, 1978, 1977, 1976, 1975, 1974, 1973, 1972, and 1971.

What are the cheapest Performance and Racing Products for my 1981 Buick Estate Wagon?

The cheapest 1981 Buick Estate Wagon Performance and Racing Products we carry in stock are:

Tie Rod Dust Boot (17360821) – $9.99
Ball Joint Dust Boot Set (22906820) – $10.99
Coil Spring Isolator Set (22908205) – $12.99
Rotor; GM HEI (17350190) – $13.29
Oil Pan Bolt Kit (17360377) – $17.49

What are the top-rated Performance and Racing Products that fit the 1981 Buick Estate Wagon?

Out of 135 reviews by customers, our 1981 Buick Estate Wagon Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1981 Buick Estate Wagon and their top-rated products:

Performance Suspension Products
- Drag Shock-70/30:GM (Rear) (22905061) – $104.99

What types of Performance and Racing Products do you sell for my 1981 Buick Estate Wagon?

As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1981 Buick Estate Wagon:

Can I get help with 1981 Buick Estate Wagon Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Performance and Racing Products and more.

What is your return policy for Buick Estate Wagon Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Buick Estate Wagon Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1981 Buick Estate Wagon Performance and Racing Products

Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)

Energy Suspension – Control Arm Bushing Set (Part No.3.3103R)

Lakewood – Drag Shock-70/30:GM (Rear) (Part No.40310)

Edelbrock – Performer Carb/Plate Nitrous Systems for Spread-Bore (Q-Jet)Carbs (50-75-100 Hp) (Part No.70002)

Mr. Gasket – Intake Manifold Bolts (Part No.957G)

PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)

MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)

Mr. Gasket – Oil Pan Bolt Kit (Part No.6085)

Richmond Gear – RngPnn (Part No.49-0095-1)

Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13128R)

B & M – Holeshot 2400 (Part No.20412)

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.42-222-4)

Energy Suspension – Control Arm Bushing Set (Part No.3.3156R)

Energy Suspension – High Performance Sway Bar End Link Kit with Hardware (Part No.9.8117R)

Accel – Distributor Cap And Rotor Kit (Part No.8124)

Lakewood – Trans Mount: Urethane-Chevy (Part No.24350)

Mr. Gasket – Differential Cover Kit (Part No.9891)

MSD Ignition – Rotor; GM HEI (Part No.8410)

Mallory – Unilite Ignition Module (Part No.605)

B & M – Transmission Kit, Master Overhaul Kit For TH400 (Part No.21041)

Edelbrock – Performer RPM 2 Carb/Plate Nitrous Systems 4500 Series Carbs (200-400+ Hp) (Part No.70081)

Mr. Gasket – Water Neck (Part No.2557)

Accel – Supercoil (Part No.140001)

Energy Suspension – Coil Spring Isolator Set (Part No.3.6108G)

Edelbrock – Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1407)

Powertrax – Lock Right Locker (Part No.1921-LR)

Lakewood – Drag Shock-70/30:GM (Part No.40120)

Energy Suspension – High Performance Sway Bar End Link Kit with Hardware (Part No.9.8117R)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

B & M – Tork Master 3000 (Part No.20402)

B & M – Tork Master 2400 (Part No.20404)

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

Edelbrock – Performer Small-Block Oldsmobile 350 EGR Intake Manifold (Part No.3711)

Spectre – Water Neck; Olds (Part No.4733)

B & M – Performance Torque Converter for GM TH400, 350, & 375 Transmissions (Part No.20400)

B & M – Holeshot 3600 (Part No.20425)

B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.42-222-4)

B & M – Holeshot 2400 (Part No.20412)

Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam (Part No.42-223-4)

Competition Cams – Thumpr 226/241 Hydraulic Flat Cam (Part No.42-600-5)

Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)

MSD Ignition – High Energy Ignition Coil for GM HEI Distributors (Part No.8225)

Mallory – Unilite Ignition Module (Part No.605)

Accel – GM Hei Supercoil Red/White (Part No.140005)

Mallory – Distributor Wiring Harness (Part No.29349)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)

Edelbrock – Performer 1404 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1404)

PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)

MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)

MSD Ignition – Distributor Cap and Rotor; GM HEI Distributor; Red (Part No.8416)

PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)

MSD Ignition – Rotor; GM HEI (Part No.8410)