Name: Drum Brake Hardware Combi-Kit
Brand: Carquest Wearever
SKU: 17138
Price: 10.49 USD

from

$10.49

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance.

Product Features:

Manufactured to restrain high tolerances with quality materials
Coated to eliminate heat and corrosion deterioration
This part matches Original Equipment (OE) quality specifications

from

$23.79

Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:

Wearever Brake Shoes come bonded or riveted based on OE design.
Wearever Brake Shoes are coated to prevent rust.
Wearever Brake Shoes are 100% New not remanufactured.
Brand may vary by location

from

$17.08

Brake Shoe Keeper Ki

from

$172.99

CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:

100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
All units are 100% tested to ensure reliable performance.
Guaranteed fit and function.

from

$15.99

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

Each unit is 100% new, providing consistent performance when servicing your brake system
Easy to transfer for on-the-spot master cylinder bleeding
Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
Easy to clean to ensure no cross contamination
Durability for long lasting performance

from

$40.99

Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:

Meets or exceeds original equipment specifications for performance and durability
OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
Application-specific caliper bodies for easy installation
Brackets included where required, for complete system restoration
Meets or exceeds original equipment specifications for performance and durability
OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
Application-specific caliper bodies for easy installation
Brackets included where required, for complete system restoration
OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
OE Style, stainless steel pad abutment hardware included
100% end-of-line inspection and pressure testing ensures quality and performance
Caliper finish or coating may vary

from

$31.49

Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:

Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
Plastic reservoirs are vacuum-tested to ensure they are leak free.
Plastic reservoirs are 100% vacuum-tested to ensure proper function

from

$58.99

CARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design And non-directional finish that eliminates noise And enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade And increase the life of your pads. Ready to install out of the box to save you time.

Product Features:

Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Matches OE vane size for proper cooling
Optimal metallurgy and casting thickness to preventing warping
Air gap eliminates brake fade and increases pad life
Non-directional finish decreases break-in time

from

$93.78

The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

Coat-Z protective anti-corrosion coating
Better wet braking performance by permanent expulsion of brake dust and water
Sporty look
Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
Noticeable improvement in the braking power of your car
Prevention of brake fade
Countersinking of holes doubles up as wear indicator
1:1 exchange of original disc possible
No additional adaption necessary
Not subject to registration: general ABE certification supplied with disc

from

$8.49

Brake M/C Reservoir

from

$12.59

Wagner Brake Products provide the latest innovations in braking technologies and complete coverage for passenger vehicles and medium-duty commercial applications. Wagner Brake Products continue to set industry standards with engineering expertise and a commitment to ensuring that Wagner parts deliver original equipment fit, form and function to deliver superior braking performance. With comprehensive coverage, Wagner Brake offers all the components necessary for a complete brake repair. Wagner premium products offer exceptional quality for all the latest applications.

from

$8.29

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels
Helps deliver a quieter, more efficient braking system

from

$1.58

Eliminate the replacement of costly steering knuckles, as well as time spent drilling, tapping or rethreading the mounting holes, with an Original Equipment Disc Brake Caliper Bolt Kit. The Original Equipment Brake Caliper Bolts is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

OE Quality
Save time, money and labor by replacing only the Disc Brake Caliper Bolt – instead of the entire caliper bracket or knuckle
Pre-coated with thread lock to prevent loosening

from

$35.00

Wagner TQ® brake pads feature a zero-copper friction formulation and a unique Integrally Molded Insulator (IMI¿) technology for quieter operation.

Product Features:

LONG LIFE — Superior formulation design dissipates heat for long-lasting friction performance and reduced brake fade
COMPREHENSIVE COVERAGE — Brake pads available for most vehicles on the road

from

$24.99

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

Dependable stopping power
Single layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$21.99

This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Brand may vary by location

from

$8.49

Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$22.43

The FAE Stop Light Switch is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$51.05

The quality of ATE drums is characterized by the fact that we let the system competence from series production flow into their development. You can rely on a proven high quality standard applied worldwide. Close dimensional tolerances ensure a high degree of accuracy, for example. The cylindricity (deviation of friction surface diameter from the theoretical cylindrical ideal) is max. 5/100mm.

Product Features:

Manufactured to OE specifications Integrity to original design
The ATE drums are made exclusively of high-grade cast iron with a homogeneous microstructure.
Important functional dimensions are completely verified in production.
Optimum surface roughness and good thermal conductivity makes for stable friction coefficients.
The ATE drum permits problem-free fitting during installation.
Part number, coded batch number, and manufacturing date are stamped into the brake drum.
Fitting instructions are included.