1980 Toyota Pickup Differentials

Name: Zip Locker Bulkhead Fitting Kit
Brand: Yukon Gear
SKU: 34000
Price: 36.99 USD

Find your specific 1980 Toyota Pickup original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1980 Toyota Pickup Differentials

from

$36.99

Product Features:

Bulkhead fitting kit
Includes bulkhead fitting, outer fitting and o-ring

from

$18.99

Product Features:

Bulkhead quit connect fitting

from

$189.99

8″ standard Open case, bare.

Product Features:

Standard open carrier case
Fits Toyota 8″ with 4 cylinder engine

from

$26.99

Spartan spring & pin kit, fits smaller designs.

Product Features:

Replacement spring and pin kit for Spartan Locker
Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
Includes 4 springs and 4 alignment pins

from

$14.29

Product Features:

Brand may vary by location

from

$4.99

Product Features:

Brand may vary by location

from

$42.99

Product Features:

MINI-INSTL KT-TOYOTA 7.5″

from

$364.99

Yukon Performance 10 bolt steel spool for V6 Toyota with 30 spline axles. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:

Fits Toyota V6 rear
Provides 100% traction to both wheels at all times
Not recommended for street driven vehicles

from

$78.99

Product Features:

Seal housing for Toyota 8″ and V6
Includes o-rings

from

$404.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits 1979-1985 Toyota Pickup and 4Runner and 1975-1990 Landcruiser
4.88 ratio
29 spline pinion
Includes conversion yoke, seal, and pinion nut

from

$49.99

7.5″ Toyota Spartan locker cross pin.

Product Features:

USA Standard Gear heavy-duty short cross pin shaft
Fits Toyota 7.5″
Works with Spartan Locker or standard open spider gears

from

$519.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket. This kit fits applications with a 27 spline pinion.

Product Features:

Fits Toyota V6 rear
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.

from

$258.99

Yukon standard open spider gear kit for Toyota 8″ 4-cylinder with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fits Toytoa 8″ 4 cylinder open differential
Includes two side gears, two pinion gears, cross pin shaft, roll pin spider gear thrust washers.

from

$9.99

Product Features:

Roll pin
Fits Toyota 8″ with 4 cylinder engine

from

$16.99

Toyota 8″ & V6 pinion nut washer.

Product Features:

Pinion nut for Toyota 8″ and V6

from

$188.99

Bearing race driver for rear Toyota V6, Landcruiser reverse rotation, and Tacoma with locker. (TOY35028). No return.

Product Features:

Bearing race driver
Fits 35028 race
All steel construction

from

$9.99

Toyota 7.5 pinion nut (M18x1.5).

Product Features:

Pinion nut for Toyota 7.5″
18mm x 1.5 thread

from

$19.99

Pinion seal for 7.5″, 8″, V6, and T100 and Tacoma with lockers.Yukon Mighty seal.

Product Features:

Pinion seal
Fits Toyota 7.5″, 8″ with 4 cylinder engine, V6, Landcruiser and Tacoma/T100 with factory locking differential

from

$274.99

T8 30spline axle ’86-00 (24.64″ – 29.08″ CUT2LTH) 4340.

Product Features:

Fits 1979-2000 Toyota 8″ and V6 rear
4340 Chromoly
30 spline
29 1/8″ long
Cut to length design fits 26.62″-29.26″ applications
106mm brake pilot

from

$6.99

Ring Gear bolt for Toyota 7.5″, 8″, V6, Landcruiser reverse front & T100/Tacoma w/ factory locker. 11mm x 1.0.

Product Features:

Ring gear bolt for Toyota 7.5″, 8″, 8″ V6, Landrcuiser reverse rotation front and T100 and Tacoma rear with factory locking differential
11mm x 1.0

from

$7.99

8″ standard Open pinion gear Thrust washer.

Product Features:

Pinion gear thrust washer
Fits Toyota 8″ with 4 cylinder engine

from

$101.99

7.5″ V6 & 4cyl side shim kit (incl. 7 shims).

Product Features:

Carrier shim kit
Fits Toyota 7.5″

from

$229.99

Product Features:

TOY 10BL 7.5 R/P 5.29 IFS MG NOT REV CUT

from

$10.99

Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.

Product Features:

Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser

from

$769.99

Limited Slip Dffrntl

from

$11.99

Toyota 8″ & V6 gasket.

Product Features:

Dropout gasket
Fits Toyota 8″ and V6

from

$529.99

8″ Reverse high-pinion Toyota Drop Out (fits 8″ Housing) .

Product Features:

Fits Toyota Landcruiser reverse rotation front

from

$299.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear. This kit fits applications with a 27 spline pinion.

Product Features:

Fits Toyota V6 rear
Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.

Popular 1980 Toyota Pickup Differentials Categories

Differential Oil

Pinion Shaft Bearings

Differential Open Unit and Components

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Ring and Pinions

Differential Cases

Differential End Yokes

Differential Lock Assemblies

Differential Air System Seal Housings

Differential Spools

Front Differential Cover Gaskets

Differential Pinion Bearing Kits

Differential Seals

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Automatic Transmission Differential Carrier Gaskets

Differential Side Gear Thrust Washers

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Oil Deflectors

Differential Pinion Gear Washers

Differential Ring and Pinion Kits

Limited Slip Differential Assemblies

Maybe you’re in the middle of a full rebuild of that 1980 Toyota Pickup. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 119 different Differentials in our inventory ranging from $5.99 to $959.99. That means you can find the exact parts or products you need to keep that 1980 Toyota Pickup running smoothly.

Differentials are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1980 Toyota Pickup. Yukon Gear, National, and Motive Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1980 Toyota Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 11 reviews in this category, some of the top rated parts include Tapered Roller Bearing with 4.0 stars and Toyota 7.5 Pinion Nut with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1980 Toyota Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1980 Toyota Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1980 Toyota Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Pickup the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular National Differentials

We carry National parts in our stock across Front Differential Pinion Bearings categories, plus more. For a 1980 Toyota Pickup, our most popular National Differentials include:

from $89.99

(2)

Bearings

Front Differential Pinion Bearings

from $53.99

(1)

Bearings

Front Differential Pinion Bearings

from $6.99

(6)

Bearings

Differential Bearings

FAQs for 1980 Toyota Pickup Differentials

What are the most purchased Differentials for the 1980 Toyota Pickup?

Out of 119 Differentials for the 1980 Toyota Pickup, the most popular in our inventory are:

from $44.99

This product is not rated

3 Qt – Penzoil 80W90 Conventional Gear Oil

Differential Oil

from $148.99

This product is not rated

Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts

Differential Oil

from $13.99

This product is not rated

Crush Sleeve

Differential Crush Sleeves

What are the top-rated 1980 Toyota Pickup Differentials?

Top-rated Differentials for your 1980 Toyota Pickup based on customer reviews/ratings are:

from $14.29

(1)

Tapered Roller Bearing

“Replaced original OEM shocks and the ride is better than when my 2007 Hyundai Entourage was brand new.”

from $9.99

(1)

Toyota 7.5 Pinion Nut

“Matches OEM nut from 1995 Toyota base model 2wd pickup with 7.5″ rear diff. The casting was not as good as original, it had ripples on the mounting ”

1980 Toyota Pickup Differentials

More 1980 Toyota Pickup Differentials

Essential 1980 Toyota Pickup Differentials

Yukon Gear – Zip Locker Bulkhead Fitting Kit (Part No.34000)

Yukon Gear – Zip Locker Bulkhead Quick-Disconnect Fitting (Part No.34038)

Yukon Gear – Standard Open Carrier Case, Toyota 8" 4 Cylinder (Part No.20113)

USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)

Driveworks – Tapered Roller Bearing (Part No.S-30306)

Driveworks – Differential Seal (Part No.S-710419)

Motive Gear – Differential Gear Install Kit (Part No.TOYIKIFS)

Yukon Gear – Steel Spool For Toyota V6 (Part No.32051)

Yukon Gear – Seal Housing For Toyota Zip Locker (Part No.34011)

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota 8" In A 4.88 Ratio (Part No.24646)

USA Standard Gear – 7.5" Toyota Spartan Locker Cross Pin (Part No.17030)

USA Standard Gear – Master Overhaul Kit for the Toyota V6 & Turbo 4 Differential, ’02 & down (Part No.37071)

Yukon Gear – Standard Open Spider Gear Kit For Toyota 8" 4 Cylinder With 30 Spline Axles (Part No.16062)

Yukon Gear – 8" Roll Pin, Solid (Part No.33412)

Yukon Gear – Toyota 8" & V6 Pinion Nut Washer (Part No.33168)

Yukon Gear – Bearing Race Driver (Part No.56008)

Yukon Gear – Toyota 7.5 Pinion Nut (Part No.33155)

Yukon Gear – Pinion Seal For Toyota 7.5", 8", V6 & T100 (Part No.30005)

Yukon Gear – T8 30Spline Axle (24.64" – 29.08" Cut2Lth) 4340 – 106Mm Brake Pilot (Part No.21724)

Yukon Gear – Ring Gear Bolt (Part No.33060)

Yukon Gear – 8" Standard Open Pinion Gear Thrust Washer (Part No.33392)

Yukon Gear – Carrier Shim Kit For Toyota 7.5" (Part No.55038)

Motive Gear – Differential Ring and Pinion (Part No.T529IFS)

Yukon Gear – Outer Oil Slinger (Part No.33025)

Yukon Gear – Limited Slip Dffrntl (Part No.26057)

Yukon Gear – Toyota 8" & V6 Gasket (Part No.23028)

Yukon Gear – 8" Reverse High-Pinion Toyota Drop Out (Part No.32298)

Yukon Gear – Pinion Install Kit For Toyota V6 Rear Differential (Part No.13092)

Popular 1980 Toyota Pickup Differentials Categories