1980 Pontiac Grand Prix Drivetrains
More 1980 Pontiac Grand Prix Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1980 Pontiac Grand Prix, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1980 Pontiac Grand Prix Drivetrains
Driveworks – Taper Bearing Cup (Part No.S-HM-88610)
from
$6.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Motive Gear – Differential Ring and Pinion (Part No.GM7.5-410)
from
$216.99Product Features:
- GM 10BL 7.5&7.625 R/P 4.10 MG 10 3/8 X 18 LH THRED BLTS, PD=1.438
Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (Part No.618-005.1)
from
$3.79
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Mini Spool For GM 8.5" With 28 Spline Axles (Part No.32232)
from
$165.99
10 bolt Mini Spool for 8.5″ GM with 28 spline axles. Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.5″ with 28 spline axles
- Installs into a standard open carrier case
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
USA Standard Gear – Master Overhaul Kit for the 8.2" Buick, Olds, Pontiac Differential (Part No.37054)
from
$279.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits 8.2″ Buick, Oldsmobile and Pontiac
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
Yukon Gear – Set Up Bearing (Part No.56045)
from
$153.99
M802048 set-up bearing (one bearing). No return.
Product Features:
See More
Product Features:
- Set up bearing
- Fits M802048 pinion bearing
- Easily slips on and off pinion journal to allow for easier pinion depth adjustment
Mr. Gasket – Differential Gasket (Part No.84A)
from
$18.09
Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047-inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1965-1972 Chevrolet/GM passenger car 12 bolt 8.875-inch ring gear 1965-72 Passenger Car.
Product Features:
See More
Product Features:
- .047″ thick cellulose/nitrile composite gasket material
- Precision die cut
- Reusable
Yukon Gear – 14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16064)
from
$373.99
Product Features:
See More
- Clutch kit
- Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
- 14 piece kit
- Composite clutches
Motive Gear – Differential Crush Sleeve (Part No.3954480)
Yukon Gear – Aluminum Girdle Cover For 8.2" And 8.5" GM Ta HD (Part No.32121)
from
$396.99
Aluminum Girdle cover for 8.2″ and 8.5″ GM TA HD.
Product Features:
See More
Product Features:
- Fits GM 8.5″ and 8.6″
- Aluminum girdle cover
Yukon Gear – Clutch Guide For GM 7.5" & 7.6" Dura Grip (Part No.33251)
Pro-King – Axle Seal (Part No.721A074)
from
$1.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Pro-King – Differential Cross Shaft (Part No.742G930)
from
$2.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – 14 Plate Dura Grip Composite Clutches, GM 7.5 (Part No.16119)
from
$202.99
14 plate DURAGRIP COMPOSITE clutches, GM 7.5.
Product Features:
See More
Product Features:
- Clutch kit
- Fits GM 7.5″ and 7.625″ with Dura Grip positraction
- Steel clutches
Richmond Gear – RngPnnInstlKt (Part No.83-1044-M)
from
$218.99
RngPnnInstlKt
Yukon Gear – Positraction Internals For 7.5" And 7.625" GM With 28 Spline Axles (Part No.16117)
from
$279.99
Yukon positraction internals for 7.5″ and 7.625″ GM with 28 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects. This kit fits Yukon Dura Grip & Eaton positraction cases. It is not compatible with any other positractions.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits GM gm 7.5″ and 7.625″ with 28 spline Dura Grip positraction
- Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – Chrome Moly Cross Pin Shaft For Mini-Spool For 8.5" GM (Part No.32238)
from
$61.99
Chrome Moly cross pin shaft for Mini-Spool for 8.5″ GM HD.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 8.5″
- Chromoly steel for added strength
Yukon Gear – Standard Open Carrier Case, GM 7.625", 3.23 & Up (Part No.20089)
from
$349.99
Product Features:
See More
- Standard open carrier case
- Fits GM 7.625″
- 3.23 and up ratio only
- Does not include spider gears
Pro-King – Differential Pinion Seal (Part No.742G070)
from
$4.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Pro-King – Differential Pinion Shim Kit (Part No.742G200A)
from
$18.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Motive Gear – Differential Mini Spool (Part No.MS7.5-28)
Yukon Gear – Forged Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41093)
from
$359.99
Yukon forged yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Forged steel
National – Bearings (Part No.M86610)
from
$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)
from
$51.99
Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.
See More
Pro-King – Differential Pinion Gear Washer (Part No.742G216)
from
$2.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – R1563Tav Rear Axle Bearing And Seal Kit (Part No.10004)
from
$42.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1563TAV axle bearing and seal kit, TorringtonBrand, 2.250″ OD, 1.400″ ID. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.250″ O.D.
- 1.400″ I.D.
Yukon Gear – Posi Spring Kit For GM 7.5", With Preload Plates (Part No.33206)
from
$153.99
Product Features:
See More
- Positraction spring kit
- Fits GM 7.5″ and 7.625″ Dura Grip
- Includes preload plates
Yukon Gear – Pinion Install Kit For GM 8.2" Differential For Buick, Pontiac, And Oldsmobile (Part No.13068)
from
$282.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits 8.2″ Buick, Oldsmobile and Pontiac
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
Popular 1980 Pontiac Grand Prix Drivetrains Categories
1980 Pontiac Grand Prix Drivetrains
You count on your 1980 Pontiac Grand Prix to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 251 Drivetrains ranging in price from $2.49 to $1,153.99, you’re sure to find everything you need for your 1980 Pontiac Grand Prix.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 13 different brands like Moog, Driveworks, and National. 1980 Pontiac Grand Prix Drivetrains start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 4,840 extensive product reviews on 1980 Pontiac Grand Prix Drivetrains. Some of the top-rated Drivetrains products we carry are Oil Seal with 4.8 stars and Bearings with 4.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1980 Pontiac Grand Prix below to get started!
Top-Rated Drivetrains Brands For Your 1980 Pontiac Grand Prix
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 Pontiac Grand Prix running right for years to come. In our inventory you’ll find brands like Moog, Driveworks, National, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1980 Pontiac Grand Prix back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1980 Pontiac Grand Prix, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1980 Pontiac Grand Prix Drivetrains
What are the most purchased Drivetrains for the 1980 Pontiac Grand Prix?
Out of 251 Drivetrains for the 1980 Pontiac Grand Prix, the most popular in our inventory are:
What are the top-rated 1980 Pontiac Grand Prix Drivetrains?
Top-rated Drivetrains for your 1980 Pontiac Grand Prix based on customer reviews/ratings are:
