1980 Mercury Cougar Engine Parts

Name: "Edelbrock RPM Small-Block Ford 1.90"" Cylinder Head Hydraulic Flat Tappet Cam, 60229"
Brand: Edelbrock
SKU: 60229
Price: 1022.99 USD

Below you will find various in-demand Mercury Engine Parts, components and accessories for your 1980 Cougar. Advance Auto Parts has popular Cougar parts like Valve Cover and Cylinder Heads, Engine Gaskets and Seals, Camshafts and more. You’ll also find aftermarket and OEM Engine Parts for other Cougar model years including 1993, 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002 and more. Select a category of 1980 Mercury Cougar Engine Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1980 Mercury Cougar Engine Parts Categories

Valve Covers

Engine Valve Lifters

Valve Cover Gaskets

Engine Timing Chain Kits

Oil Pumps

Oil Pan Gaskets

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Crankshaft Position Sensors

Timing Covers

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Engine Oil Cooler Accessories

Cylinder Head Gaskets

Oil Pump Expansion Plugs

Rubber Freeze Plugs

Crankshaft Pulleys

Timing Cover Repair Sleeves

Main Bearing Repair Sleeves

Oversized Main Bearings

Camshaft Bearings

Push Rods

Standard Rod Bearing Sets

Camshaft and Lifter Kits

Cylinder Head Bolts

Main Bearings

Oil Pump Kits

Standard Piston Rings

Lower Gasket Sets

Timing Chains

Engine Oil Galley Plugs

Engine Valve Springs

Freeze Plug – Block Kits

Fuel Pump Flange Gaskets

Standard Individual Rod Bearings

Camshaft Plugs

Oil Pump Screens

Oil Pump Gasket and Seals

Expansion Plug – Pipes

Cylinder Heads

Engine Valve Locks

Rocker Arm Shaft Plugs

Engine Valve Seats

Cylinder Heads

Oversized Piston Rings

Oversized Rod Bearing Set

Engine Oil Cooler (Not O.E.)

Camshaft Lubes

Engine Oil Pump Primers

Oversized Piston Sets

Essential Engine Parts for 1980 Mercury Cougars

"Edelbrock RPM Small-Block Ford 1.90"" Cylinder Head Hydraulic Flat Tappet Cam, 60229"

from

$1022.99

The Edelbrock #60229 Performer RPM cylinder head is designed for use with 289-351W c.i.d. Small-Block Ford applications. The Edelbrock #60229 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.

from

$2.99

Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Anchor Engine Mount: Front Right, 1 Piece, 2522

from

$17.99

Anchor 2522 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Dorman Rubber Expansion Plug 3/4 In. - Size Range 3/4 In. - 7/8 In. (Sold by each), 570-003

from

$10.49

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Dorman Engine Oil Pan: Direct Fit, Steel, Sump, 264-022

from

$78.99

This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Felpro Engine Timing Cover Gasket Set, TCS 46016

from

$32.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

PowerBond Race Performance 25% Underdrive Harmonic Balancer 154.5mm Diameter, PBU1478SS25

from

$151.99

For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.

"Edelbrock Valve Seat For S/B Chevy Heads With 1.60"" Valves, 9711"

from

$86.99

The Edelbrock No. 9711 Intake Valve Seat set is a replacement for Edelbrock cylinder heads.

Encore Automotive Engine Valve Lifter, VL-D20005

from

$13.99

Encore Automotive Valve Lifter is a steel cylinder designed to maintain zero valve clearance in a combustion engine.

Edelbrock RPM 427 Low-Riser/ Medium-Riser Cylinder Head, 60075

from

$1223.99

The Edelbrock No. 60075 Performer RPM cylinder head is designed for use with 1961-76 390-427-428 Ford applications. Edelbrock Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.

Mr. Gasket Engine Oil Dipstick & Tube - Chrome, 6921

from

$33.59

Mr. Gasket Oil Dipstick is similar in design to original equipment, it can be installed with simple hand tools.

Felpro Engine Oil Pan Gasket Set - PermaDryPlus rigid carrier, Oil Pan SnapUps Included, OS 13260 T

from

$56.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Felpro Engine Conversion Gasket Set, CS 9790-4

from

$101.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Sealed Power Engine Camshaft Bearing Set, 1204M

from

$45.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$11.99

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Cloyes Performance High Performance Timing Chain, 9-130

from

$77.99

“High Performance 3/8″” Pitch Double Roller Replacement True Roller Chain. 0.250″” Roller Diameter. Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness. Prestressed to Increase Fatigue Life.”

Felpro Engine Crankshaft Seal Kit, BS 30136

from

$18.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

from

$46.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

from

$2.99

Dorman Brass Expansion Plug Kit, 15 Expansion Plugs, 4 Pipe Plugs, 567-009

from

$18.99

The plugs in this engine expansion plug kit are designed to match the original parts on specified vehicles. Made of quality materials, this kit components are engineered for reliable performance and durability.

from

$101.99

Driveworks Main Bearing Repair Sleeve, S-99181

from

$43.49

Driveworks Main Bearing Repair Sleeve, S-99181.

Dorman Brass Pipe Plug - Square Head - 1/4 In. MNPT, 785-071D

from

$5.29

This pipe plug matches the original equipment plug for diameter, thread pitch and head type to ensure a reliable repair. Made of corrosion-resistant material, it has been engineered for leak-free performance and a long service life.

Sealed Power Engine Valve Lifter, HT-900

from

$13.79

Melling Stock Replacement Engine Assembly Lubricant, 4 oz., M-10012

from

$5.89

Made In USA. 4 oz. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.

Sealed Power Engine Piston Ring Set, E-251X 60

from

$63.99

Dorman Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each), 555-007

from

$1.79

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Dorman Steel Cup Expansion Plug 3/4 In., Height 0.250 (Sold by each), 555-012

from

$1.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Upgrade your 1980 Mercury Cougar with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1980 Mercury Cougar, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Engine Parts are key to keeping your Cougar functioning at its best. At Advance Auto Parts, we offer a wide selection of 239 Engine Parts for the 1980 Mercury Cougar, designed to meet your needs without breaking the bank. From Valve Cover and Cylinder Head replacements to Engine Gaskets and Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1980 Mercury Cougar at great prices. Our Engine Parts inventory for this model ranges from just $0.43 to $2,274.99, with an average price of $86.31. Our 239 Engine Parts in stock come from 25 trusted brands, so you’re sure to find the right part for your 1980 Mercury Cougar without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1980 Mercury Cougar, we stock popular OEM and aftermarket Engine Parts from top names like Felpro, Sealed Power, Dorman, and more. Felpro Engine Parts start at just $37.99 and boast an impressive 4.6 stars average rating from customers. Sealed Power and Dorman also bring quality to the table, with Engine Parts available starting at $0.43, and at an average 4.4 stars rating. With 537 customer reviews and counting, our 1980 Mercury Cougar Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1980 Mercury Cougar is always ready to roll. We’re committed to providing you with everything you need to keep your Cougar in top shape, all in one place. Start shopping confidently below for your 1980 Mercury Cougar!

Best-Selling Valve Cover and Cylinder Heads for 1980 Mercury Cougars

Enhance the driving experience in your Mercury with 34 quality Valve Cover and Cylinder Head components, starting at $0.43.

show more show less

Felpro PermaTorque Engine Cylinder Head Gasket, 8548 PT-2

from

$37.99

Sealed Power Engine Valve Spring Retainer Keeper, VK-115

from

$0.43

from

$2.49

from

$13.79

Felpro PermaTorque Engine Cylinder Head Gasket, 9333 PT-1

from

$36.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Felpro PermaTorque Engine Cylinder Head Gasket Set, HS 8548 PT-11

from

$83.99

from

$83.99

Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for Ford Small Block 260-289-302-351W engines, this valve cover features chrome-plated steel construction and a smooth design. Sold in pairs, this stock profile cover is baffled to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.

Edelbrock 289-302 Ford Head Bolt Kit, 8552

from

$107.99

Edelbrock 289-302 Ford Head Bolt Kit, 8552.

Dorman STD Cylinder Head Bolt, 7/16-14 X 3.938 X 1-1/16 In., Hex 5/8 In. (Sold by each), 675-131

from

$4.29

This engine cylinder head bolt directly replaces the original bolt on specific vehicle years, makes and models.

Edelbrock Valve Covers, Signature Series, Stock Height, Steel, Chrome,Ford, Small Block, 4460

from

$78.99

The Edelbrock No: 4460 Signature Series Valve Covers are designed for Ford 260-289-302 (not Boss) and 351W V8 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

ARP Auto Racing For Use With Ford Small Block 289/ 302, Hex Head, 180000Psi Tensile, 154-3601

from

$82.99

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Felpro PermaTorque Engine Cylinder Head Gasket Set, HS 7916 PT-2

from

$47.99

"Competition Cams Super Valve Locks, 11/32"" 1 St, 611-16"

from

$40.99

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

from

$1.79

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

"ARP Auto Racing For Use With Chevy Small Block, 1.895"" Stud L, Black Oxide, Chrome, Set Of 16, 134-7104"

from

$98.99

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma-Loc(TM) adjusters.

Edelbrock Small-Block Ford E-205 Cylinder Head w/ Hydraulic Roller Camshaft, 5027

from

$2274.99

Edelbrock Small-Block Ford E-205 Cylinder Head w/ Hydraulic Roller Camshaft, 5027.

"Edelbrock Small-Block Ford E-Street Cylinder Heads 2.02"", 5025"

from

$1332.99

“Edelbrock Small-Block Ford E-Street Cylinder Heads 2.02″”, 5025. ”

"Edelbrock RPM Small-Block Ford 2.02"" Cylinder Head Hydraulic Roller Camshaft, 60255"

from

$1087.99

“Edelbrock RPM Small-Block Ford 2.02″” Cylinder Head Hydraulic Roller Camshaft, 60255. ”

"Edelbrock RPM Small-Block Ford 2.02"" Cylinder Head Hydraulic Flat Tappet Cam, 60259"

from

$1051.99

The Edelbrock #60259 Performer RPM cylinder head is designed for use with 289-351W c.i.d. Small-Block Ford applications. The Edelbrock #60259 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.

from

$1022.99

Edelbrock Victor Jr Small-Block Ford Cylinder Head Bare, 77219

from

$858.99

Edelbrock Victor Jr Small-Block Ford Cylinder Head Bare, 77219.

Edelbrock Victor Jr Small-Block Ford Cylinder Head, 77169

from

$858.99

Affordable, top quality. 500+ HP potential. High-flow 210cc intake ports. CNC gasket-matched part entries and exits.

Edelbrock Classic Series Valve Cover, 41609

from

$291.99

Edelbrock part No: 41609 Classic Series Valve Covers are designed for Ford 221-351W V8 1962-95 applications and have a Satin finish. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. Made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.

Sniper Motorsports Sniper Valve Cover - Fabricated Aluminum - Ford Small Block - Long Bolt - Black, 890012B

from

$249.99

“Sniper’s fabricated aluminum valve covers gives you an excellent way to add a high-end fabricated look without the high-end price. They offer you a lightweight and tough valve cover for your favorite street, off-road, or racing machine. These valve covers are constructed of 6061 T5 sheet aluminum, precision TIG welded for a proper fit, and feature a laser etched “”Sniper”” logo on top. They are available in silver anodized or black coated finishes along with various heights to clear most popular rocker arm combinations. All of our valve covers include mounting hardware for quick and simple installation.”

Most Popular 1980 Mercury Cougar Engine Gaskets and Seals

Customize your Mercury with 27 Engine Gaskets and Seals products like Valve Cover Gaskets, Oil Pan Gaskets, and Timing Cover Gasket Sets, all priced under $174.99.

show more show less

Felpro Engine Valve Cover Gasket Set, VS 13264 T

from

$52.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

from

$56.99

Felpro Engine Oil Pan Gasket Set - Blue Stripe cork-rubber, OS 13260 C

from

$28.99

Felpro Engine Valve Cover Gasket Set, VS 13264 C

from

$27.99

Felpro Engine Oil Pump Pickup Tube Gasket, 72516

from

$3.29

Felpro Engine Timing Cover Gasket Set, TCS 45449

from

$26.99

Felpro Engine Valve Cover Gasket Set, VS 50029 C

from

$28.99

Felpro Engine Timing Cover Gasket Set, TCS 45450

from

$29.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

from

$18.99

Felpro Engine Valve Cover Gasket Set, VS 13264 R

from

$26.99

Felpro Engine Valve Cover Gasket Set, VS 12692

from

$15.99

Edelbrock Front Timing Cover Gasket Set, 6991

from

$30.99

Edelbrock part No: 6991 Front Cover Gasket set for Small-Block Ford. Includes front cover gasket and front seal.

from

$51.99

This Mr. Gasket Rear Main Seal is made from silicone to allow the seal to handle extreme engine oil temperature. It also provides for an upgrade for that leaky rope style seal and is a direct replacement for a rubber main seal. It’s also injection molded for a precise fit.

from

$174.99

from

$166.99

Mr. Gasket Ultra Seal: Oil Pan Gasket, 6683

from

$69.99

High performance, race quality gasket with molded rubber coating over a steel core. Steel core provides rigidity and durability, preventing prevent push out while the molded rubber coating helps seal minor oil pan rail irregularities. The one piece design eliminates the need for separate end seals to make installation easier and even further reduce the possibility of oil leakage. Provides excellent sealing and durability. Excellent replacement for stock original equipment, high performance street, drag race and oval track. Includes gasket and new oil pan bolts.

Felpro Engine Conversion Gasket Set, CS 8548-4

from

$32.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Felpro PermaTorque Engine Gasket Set, FS 7916 PT-2

from

$84.99

from

$113.99

Victor Reinz Engine Oil Pan Gasket Set, 10-10075-01

from

$81.99

Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.

Victor Reinz Engine Valve Cover Gasket Set, 15-10643-01

from

$55.99

Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Victor Reinz Engine Oil Pan Gasket Set, 10-10181-01

from

$25.49

Victor Reinz Engine Valve Cover Gasket Set, 15-10510-01

from

$17.99

Victor Reinz Engine Valve Cover Gasket Set, 15-10538-01

from

$17.99

Top Picks for 1980 Mercury Cougar Camshafts

Upgrade Mercury Cougars with top-quality Camshafts parts, including 12 OEM and aftermarket selections for your 1980 model.

show more show less

Sealed Power Engine Valve Lifter, HT-2083

from

$12.49

from

$45.99

Dorman - Pik-a-Nut Steel Cup Expansion Plug 2-1/16 In., SC, Height 0.270, 362563.1

from

$3.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Dorman Steel Cup Expansion Plug 2-1/16 In. SC, Height 0.380 (Sold by each), 555-048

from

$2.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Dorman Rubber Expansion Plug 2 In. - Size Range 2 In. - 2-1/8 In. (Sold by each), 570-014

from

$6.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Sealed Power Engine Camshaft Bearing Set, 1439M

from

$32.99

Dorman Steel Cup Expansion Plug 2-3/16 In. SC, Height 0.360 (Sold by each), 555-051

from

$3.49

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Competition Cams High Energy 206/206 Hydraulic Flat Cam and Lifter Kit, CL31-215-2

from

$382.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Edelbrock Performer-Plus Camshaft Kit, 2117

from

$382.99

“Edelbrock Performer-Plus Camshaft No: 2117 is designed for 283-400 Chevy V8 engines from 1957-86 and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus No: 2117 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you’ll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 338 HP and 389 Ft Lbs of Torque when paired with Performer EPS intake manifold No: 2701, E-Street cylinder heads No: 5089 and E-Street EFI system No: 3664. Camshaft specifications: – Intake duration: 218 Degrees – Exhaust duration: 224 Degrees – Intake lift: .464″” – Exhaust lift: .470″” – Lobe separation: 114 Degree – Intake Center Line: 110 Degree – Vacuum: 15″””

Sealed Power Camshaft Bearing Set, 2102M

from

$78.99

Speed-Pro delivers the power you need and the value & quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components.

from

$5.89

Dorman Steel Cup Expansion Plug 2-1/16 In., SC, Height 0.270 (Sold by each), 555-073

from

$2.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

In-Demand Engine Timing Parts for 1980 Mercury Cougars

Select from 48 premium Engine Timing Parts parts for your 1980 Mercury Cougar, with prices ranging from $5.29 to $496.99.

show more show less

from

$10.99

Value-priced seal meets all cataloged application requirements.

National Engine Harmonic Balancer Repair Sleeve, 88187

from

$12.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

from

$39.49

from

$13.99

Cloyes Performance Engine Timing Set, C-3057X

from

$52.99

“Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Crankshaft Sprocket Heat Treated for Durability. 0.200″” Double Row Fixed Bushing Chain.”

from

$38.49

from

$20.29

Cloyes Gear Engine Timing Components, Camshaft Timing Kit, Crankshaft Timing Kit, Timing Set with Sprockets, Timing Drive Assembly, C-3004K

from

$34.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing sets are engineered for precision, durability, and optimal engine performance. Sets includes crankshaft sprocket, camshaft sprocket and chain. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.

Dorman Timing Cover with Gasket and Seal, 635-102

from

$195.99

This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

from

$32.99

Sprockets Are Made From High Alloy Steel, and Heat-Treated For Durability. Chain Is Pre-Stressed and Heat-Treated For Longevity. SET INCLUDES: S308 Engine Timing Camshaft Sprocket (1 EA), S397 Engine Timing Crankshaft Sprocket (1 EA), C351 Engine Timing Chain (1 EA).

Cloyes Performance High Performance Timing Chain, 9-145

from

$19.99

“Street Performance 3/8″” Pitch Double Roller Replacement True Roller Chain. Seamless 0.250″” Roller Diameter. Heat Treated and Processed Links to Maximize Breaking Strength while Remaining Ductile for Toughness. Prestressed to Increase Fatigue Life. USA Made.”

from

$15.99

Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Links With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

Cloyes Performance High Performance Timing Set, 9-3535X9

from

$119.99

“Billet Camshaft Sprocket for Superior Street Performance. Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Crankshaft Sprocket Heat Treated for Durability. Seamless TRUE Roller 0.250″” Roller Diameter Chain for Reduced Friction.”

Cloyes Gear Engine Timing Crankshaft Sprocket, S531

from

$17.99

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

from

$77.99

Cloyes Performance Engine Timing Set, C-3054X

from

$52.99

“Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Crankshaft Sprocket Heat Treated for Durability. 0.200″” Double Row Fixed Bushing Chain.”

Cloyes Performance High Performance Timing Set, 9-3735Z

from

$496.99

“QUICK ADJUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. Two Piece Camshaft Sprocket Design Featuring 6 Locking Cap Screws for Maximum Clamp Load. Includes an Accessory Adjustment Tool. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″” Roller Diameter “”Z”” Chain for Reduced Friction. “”Z”” Chain Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. “”Z”” Chain Featuring a Press Fit Center Link design that Increases Load Distribution with Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness and Pre-stressed to Increase Fatigue Life. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout. 0.005″” and 0.010″” Reduced Center Distance Sets Available, to Order Add -5 or -10 to the End of this Part Number.”

Cloyes Performance High Performance Timing Set, 9-3735

from

$393.99

Cloyes Performance High Performance Timing Set, 9-3635X3Z

from

$241.99

“Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″” Roller Diameter “”Z”” Chain for Reduced Friction. “”Z”” Chain Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. “”Z”” Chain Featuring a Press Fit Center Link design that Increases Load Distribution with Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness and Pre-stressed to Increase Fatigue Life. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”

Cloyes Performance High Performance Timing Set, 9-3635X9Z

from

$229.99

“Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″” Roller Diameter “”Z”” Chain for Reduced Friction. “”Z”” Chain Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. “”Z”” Chain Featuring a Press Fit Center Link design that Increases Load Distribution with Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness and Pre-stressed to Increase Fatigue Life. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”

Cloyes Performance High Performance Timing Set, 9-3635X9-10

from

$211.99

Cloyes Performance High Performance Timing Set, 9-3635X9-5

from

$211.99

Cloyes Performance High Performance Timing Set, 9-3635X3-5

from

$194.99

Cloyes Performance High Performance Timing Set, 9-3635X3-10

from

$189.99

Most Sold 1980 Mercury Cougar Engine Mounts

Explore our best-selling Mercury parts for the 1980 Cougar among 4 OEM and aftermarket options starting from $19.99.

show more show less

Anchor Engine Mount: Front Left, 1 Piece, 2725

from

$29.99

Anchor 2725 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Anchor Engine Mount: Front Right, 1 Piece, 2726

from

$33.99

Anchor 2726 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Anchor Engine Mount: Front Right, 1 Piece, 2501

from

$19.99

Anchor 2501 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Anchor Engine Mount: Front Left, 1 Piece, 2500

from

$19.99

Anchor 2500 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Top-Rated Engine Parts Brands For Your 1980 Mercury Cougar

Shop for the best-rated brands offering Engine Parts and other products for your 1980 Mercury Cougars. Below you’ll find some of our best rated Engine Parts from Felpro, Sealed Power, and Dorman, and more. Engine Parts from these brands that fit a 1980 Cougar start at just $0.43 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Felpro 1980 Mercury Cougar Engine Parts

When it comes to maintaining or upgrading your 1980 Mercury Cougar, using quality Engine Parts is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Engine Parts, specifically designed for the 1980 Mercury Cougar. With over 3 Felpro brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $37.99, with an average price of just $49.32. Plus, with over 42 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $56.99

(6)

Felpro Engine Oil Pan Gasket Set – PermaDryPlus rigid carrier, Oil Pan SnapUps Included, OS 13260 T

“Very easy to install. Alignment pins are great bonus. They hold the gasket in the exact location.”

from $37.99

(4)

Felpro PermaTorque Engine Cylinder Head Gasket, 8548 PT-2

“Part was perfect fit.”

from $52.99

(32)

Felpro Engine Valve Cover Gasket Set, VS 13264 T

“Perfect fit”

Popular Sealed Power 1980 Mercury Cougar Engine Parts

Sealed Power auto parts is one of the highest quality Engine Part brands in the market. Any 1980 Mercury Cougar owner should feel confident when installing genuine Sealed Power parts in their vehicle. To ensure the best fit and performance for your 1980 Cougar, Advance Auto Parts carries a full inventory of 3 Sealed Power Engine Parts. Plus you will be keeping your Mercury in peak condition while saving money because prices on these Sealed Power Engine Parts range from $0.43 to $12.49, plus, with more than 6 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $0.43

(2)

Sealed Power Engine Valve Spring Retainer Keeper, VK-115

“You guys are always great”

from $12.49

(1)

Sealed Power Engine Valve Lifter, HT-2083

“Best price around and the only store with availability. Can’t go wrong with Sealed Power”

from $1.25

(3)

Sealed Power Engine Push Rod, RP-3167

“Seem to be an OK set of push rods.”

FAQs for 1980 Mercury Cougar Engine Parts

Which Engine Parts are best-sellers for 1980 Mercury Cougars?

Out of 239 Engine Parts that fit 1980 Mercury Cougars, the following parts are the top sellers:

Sealed Power Engine Valve Lifter, HT-900 (5688671) – $13.79
Sealed Power Engine Valve Lifter, HT-2083 (5688663) – $12.49
Dorman Rubber Expansion Plug 3/4 In. – Size Range 3/4 In. – 7/8 In., 02608 (89014938) – $11.49

What’s the price range for 1980 Mercury Cougar Engine Parts?

Engine Part prices for the 1980 Mercury Cougar start at $0.43 and go up to $2,274.99 for the most premium parts.

What’s the average price of a Engine Part for a 1980 Mercury Cougar?

The average price for Engine Parts for the 1980 Mercury Cougar is $86.31. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Mercury Cougar model years?

Yes, we currently carry Engine Parts for 33 model years of Mercury Cougars between 1967 and 2002. Engine Parts are bought most frequently for the following model years: 2002, 2001, 2000, 1999, 1997, 1996, 1995, 1994, and 1993.

What are the cheapest Engine Parts for my 1980 Mercury Cougar?

The cheapest 1980 Mercury Cougar Engine Parts we carry in stock are:

Sealed Power Engine Valve Spring Retainer Keeper, VK-115 (19694179) – $0.43
Dorman – Pik-a-Nut Steel Cup Expansion Plug 1-1/2 In., Height 0.220, 362652.1 (3492249) – $1.29
Sealed Power Engine Rocker Arm Ball Stud, MR-1847 (19694255) – $1.49
Dorman Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each), 555-007 (22146590) – $1.79
"Dorman Steel Cup Expansion Plug 3/8"", Height 0.150"" (Sold by each), 555-115" (22140482) – $1.99

What are the top-rated Engine Parts that fit the 1980 Mercury Cougar?

Out of 537 reviews by customers, our 1980 Mercury Cougar Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1980 Mercury Cougar and their top-rated products:

Engine Gaskets and Seals
- Felpro Engine Oil Pan Gasket Set – Blue Stripe cork-rubber, OS 13260 C (5783682) – $28.99
- Felpro Engine Oil Pump Pickup Tube Gasket, 72516 (3203433) – $3.29
- Felpro Engine Oil Pan Gasket Set – PermaDryPlus rigid carrier, Oil Pan SnapUps Included, OS 13260 T (20680305) – $56.99
Valve Cover and Cylinder Heads
- Felpro Engine Oil Pan Gasket Set – Blue Stripe cork-rubber, OS 13260 C (5783682) – $28.99
- Felpro Engine Oil Pump Pickup Tube Gasket, 72516 (3203433) – $3.29
- Felpro Engine Oil Pan Gasket Set – PermaDryPlus rigid carrier, Oil Pan SnapUps Included, OS 13260 T (20680305) – $56.99

What types of Engine Parts do you sell for my 1980 Mercury Cougar?

As of 8/2/26, these are some of the most in-demand types of Engine Parts for a 1980 Mercury Cougar:

Can I get help with 1980 Mercury Cougar Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Engine Parts and more.

What is your return policy for Mercury Cougar Engine Parts?

Advance Auto Parts keeps returns simple. For new Mercury Cougar Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1980 Mercury Cougar Engine Parts

Edelbrock – "Edelbrock RPM Small-Block Ford 1.90"" Cylinder Head Hydraulic Flat Tappet Cam, 60229" (Part No.60229)

Sealed Power – Sealed Power Engine Push Rod, RP-3165 (Part No.RP-3165)

Anchor – Anchor Engine Mount: Front Right, 1 Piece, 2522 (Part No.2522)

Dorman – Dorman Rubber Expansion Plug 3/4 In. – Size Range 3/4 In. – 7/8 In. (Sold by each), 570-003 (Part No.570-003)

Dorman – Dorman Engine Oil Pan: Direct Fit, Steel, Sump, 264-022 (Part No.264-022)

Felpro – Felpro Engine Timing Cover Gasket Set, TCS 46016 (Part No.TCS 46016)

PowerBond – PowerBond Race Performance 25% Underdrive Harmonic Balancer 154.5mm Diameter, PBU1478SS25 (Part No.PBU1478SS25)

Edelbrock – "Edelbrock Valve Seat For S/B Chevy Heads With 1.60"" Valves, 9711" (Part No.9711)

Encore Automotive – Encore Automotive Engine Valve Lifter, VL-D20005 (Part No.VL-D20005)

Edelbrock – Edelbrock RPM 427 Low-Riser/ Medium-Riser Cylinder Head, 60075 (Part No.60075)

Mr. Gasket – Mr. Gasket Engine Oil Dipstick & Tube – Chrome, 6921 (Part No.6921)

Felpro – Felpro Engine Oil Pan Gasket Set – PermaDryPlus rigid carrier, Oil Pan SnapUps Included, OS 13260 T (Part No.OS 13260 T)

Felpro – Felpro Engine Conversion Gasket Set, CS 9790-4 (Part No.CS 9790-4)

Sealed Power – Sealed Power Engine Camshaft Bearing Set, 1204M (Part No.1204M)

Carquest Premium – Carquest Oil Filler Cap, 10100 (Part No.10100)

Cloyes Performance – Cloyes Performance High Performance Timing Chain, 9-130 (Part No.9-130)

Felpro – Felpro Engine Crankshaft Seal Kit, BS 30136 (Part No.BS 30136)

Carquest Premium – Carquest Crankshaft Sensor, CSC1048 (Part No.CSC1048)

Felpro – Felpro Engine Oil Pump Gasket, 70141 (Part No.70141)

Dorman – Dorman Brass Expansion Plug Kit, 15 Expansion Plugs, 4 Pipe Plugs, 567-009 (Part No.567-009)

Felpro – Felpro Engine Gasket Set, 260-1014 (Part No.260-1014)

Driveworks – Driveworks Main Bearing Repair Sleeve, S-99181 (Part No.S-99181)

Dorman – Dorman Brass Pipe Plug – Square Head – 1/4 In. MNPT, 785-071D (Part No.785-071D)

Sealed Power – Sealed Power Engine Valve Lifter, HT-900 (Part No.HT-900)

Melling – Melling Stock Replacement Engine Assembly Lubricant, 4 oz., M-10012 (Part No.M-10012)

Sealed Power – Sealed Power Engine Piston Ring Set, E-251X 60 (Part No.E-251X 60)

Dorman – Dorman Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each), 555-007 (Part No.555-007)

Dorman – Dorman Steel Cup Expansion Plug 3/4 In., Height 0.250 (Sold by each), 555-012 (Part No.555-012)

Felpro – Felpro PermaTorque Engine Cylinder Head Gasket, 8548 PT-2 (Part No.8548 PT-2)

Sealed Power – Sealed Power Engine Valve Spring Retainer Keeper, VK-115 (Part No.VK-115)

Sealed Power – Sealed Power Engine Push Rod, RP-3167 (Part No.RP-3167)

Sealed Power – Sealed Power Engine Valve Lifter, HT-900 (Part No.HT-900)

Felpro – Felpro PermaTorque Engine Cylinder Head Gasket, 9333 PT-1 (Part No.9333 PT-1)

Felpro – Felpro PermaTorque Engine Cylinder Head Gasket Set, HS 8548 PT-11 (Part No.HS 8548 PT-11)

Spectre – Spectre Valve Cover SB Ford OE/BF, 5250 (Part No.5250)

Edelbrock – Edelbrock 289-302 Ford Head Bolt Kit, 8552 (Part No.8552)

Dorman – Dorman STD Cylinder Head Bolt, 7/16-14 X 3.938 X 1-1/16 In., Hex 5/8 In. (Sold by each), 675-131 (Part No.675-131)

Edelbrock – Edelbrock Valve Covers, Signature Series, Stock Height, Steel, Chrome,Ford, Small Block, 4460 (Part No.4460)

ARP Auto Racing – ARP Auto Racing For Use With Ford Small Block 289/ 302, Hex Head, 180000Psi Tensile, 154-3601 (Part No.154-3601)

Felpro – Felpro PermaTorque Engine Cylinder Head Gasket Set, HS 7916 PT-2 (Part No.HS 7916 PT-2)

Competition Cams – "Competition Cams Super Valve Locks, 11/32"" 1 St, 611-16" (Part No.611-16)

Dorman – Dorman Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each), 555-007 (Part No.555-007)

ARP Auto Racing – "ARP Auto Racing For Use With Chevy Small Block, 1.895"" Stud L, Black Oxide, Chrome, Set Of 16, 134-7104" (Part No.134-7104)

Edelbrock – Edelbrock Small-Block Ford E-205 Cylinder Head w/ Hydraulic Roller Camshaft, 5027 (Part No.5027)

Edelbrock – "Edelbrock Small-Block Ford E-Street Cylinder Heads 2.02"", 5025" (Part No.5025)

Edelbrock – "Edelbrock RPM Small-Block Ford 2.02"" Cylinder Head Hydraulic Roller Camshaft, 60255" (Part No.60255)

Edelbrock – "Edelbrock RPM Small-Block Ford 2.02"" Cylinder Head Hydraulic Flat Tappet Cam, 60259" (Part No.60259)

Edelbrock – "Edelbrock RPM Small-Block Ford 1.90"" Cylinder Head Hydraulic Flat Tappet Cam, 60229" (Part No.60229)

Edelbrock – Edelbrock Victor Jr Small-Block Ford Cylinder Head Bare, 77219 (Part No.77219)

Edelbrock – Edelbrock Victor Jr Small-Block Ford Cylinder Head, 77169 (Part No.77169)

Edelbrock – Edelbrock Classic Series Valve Cover, 41609 (Part No.41609)

Sniper Motorsports – Sniper Motorsports Sniper Valve Cover – Fabricated Aluminum – Ford Small Block – Long Bolt – Black, 890012B (Part No.890012B)

Felpro – Felpro Engine Valve Cover Gasket Set, VS 13264 T (Part No.VS 13264 T)

Felpro – Felpro Engine Oil Pan Gasket Set – PermaDryPlus rigid carrier, Oil Pan SnapUps Included, OS 13260 T (Part No.OS 13260 T)

Felpro – Felpro Engine Oil Pan Gasket Set – Blue Stripe cork-rubber, OS 13260 C (Part No.OS 13260 C)

Felpro – Felpro Engine Valve Cover Gasket Set, VS 13264 C (Part No.VS 13264 C)

Felpro – Felpro Engine Oil Pump Pickup Tube Gasket, 72516 (Part No.72516)

Felpro – Felpro Engine Timing Cover Gasket Set, TCS 45449 (Part No.TCS 45449)

Felpro – Felpro Engine Valve Cover Gasket Set, VS 50029 C (Part No.VS 50029 C)

Felpro – Felpro Engine Timing Cover Gasket Set, TCS 45450 (Part No.TCS 45450)

Felpro – Felpro Engine Crankshaft Seal Kit, BS 30136 (Part No.BS 30136)

Felpro – Felpro Engine Valve Cover Gasket Set, VS 13264 R (Part No.VS 13264 R)

Felpro – Felpro Engine Valve Cover Gasket Set, VS 12692 (Part No.VS 12692)

Edelbrock – Edelbrock Front Timing Cover Gasket Set, 6991 (Part No.6991)

Mr. Gasket – Mr. Gasket Rear Main Seal Gasket, 1963 (Part No.1963)

Felpro – Felpro Engine Gasket Set, 260-1125T (Part No.260-1125T)

Felpro – Felpro Engine Gasket Set, 260-1082 (Part No.260-1082)

Mr. Gasket – Mr. Gasket Ultra Seal: Oil Pan Gasket, 6683 (Part No.6683)

Felpro – Felpro Engine Conversion Gasket Set, CS 8548-4 (Part No.CS 8548-4)

Felpro – Felpro PermaTorque Engine Gasket Set, FS 7916 PT-2 (Part No.FS 7916 PT-2)

Felpro – Felpro Engine Gasket Set, 260-1125 (Part No.260-1125)

Victor Reinz – Victor Reinz Engine Oil Pan Gasket Set, 10-10075-01 (Part No.10-10075-01)

Victor Reinz – Victor Reinz Engine Valve Cover Gasket Set, 15-10643-01 (Part No.15-10643-01)

Victor Reinz – Victor Reinz Engine Oil Pan Gasket Set, 10-10181-01 (Part No.10-10181-01)

Victor Reinz – Victor Reinz Engine Valve Cover Gasket Set, 15-10510-01 (Part No.15-10510-01)

Victor Reinz – Victor Reinz Engine Valve Cover Gasket Set, 15-10538-01 (Part No.15-10538-01)

Sealed Power – Sealed Power Engine Valve Lifter, HT-2083 (Part No.HT-2083)

Sealed Power – Sealed Power Engine Camshaft Bearing Set, 1204M (Part No.1204M)

Dorman – Pik-a-Nut – Dorman – Pik-a-Nut Steel Cup Expansion Plug 2-1/16 In., SC, Height 0.270, 362563.1 (Part No.362563.1)