1980 Mercedes-Benz 280SE Fuel and Emissions Systems
More 1980 Mercedes-Benz 280SE Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1980 Mercedes-Benz 280SE, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1980 Mercedes-Benz 280SE Fuel and Emissions Systems
Bosch – Check Valve (Part No.E303027424BOS)
from
$41.56
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket.
See More
APA/URO Parts – Air Cleaner Mount (Part No.B101016755APA)
from
$4.49
Air Cleaner Mount
Bosch – Bosch Fuel Accumulator (Part No.E400013560BOS)
from
$305.01
Bosch is a global leader in the engineering and manufacture of the original equipment Fuel Accumulator for K-JETRONIC fuel injection systems. Starting and running problems occur when the fuel accumulator is defective. All K-JETRONIC fuel injection systems use the fuel accumulator to assist in preventing hot start vapor lock and keeping the pressure and flow in the fuel distributor consistent. The accumulator contains an internal spring-loaded diaphragm that prevents vapor lock by keeping the system pressurized after the engine has been shut off. If the K-JETRONIC equipped vehicle is having warm start problems, it is likely the fuel accumulator has failed.
Product Features:
See More
Product Features:
- Original Equipment Supplier
- Sturdy compact design
- Withstands the most severe operating conditions
- Engineered to the exact OEM specifications
Bosch – Port Fuel Injector (Part No.C100013496BOS)
from
$164.92
Port Fuel Injection (PFI) is the world’s most widely used system for internal combustion engines and offers many advantages for engines with a low pressure output.
Product Features:
See More
Product Features:
- Low-pressure systems are less complex and more affordable than high-pressure systems
- Robust combustion process tolerates lower-quality fuel
- Maintenance-friendly design reduces the overhead for system diagnostics
APA/URO Parts – Vacuum Check Valve (Part No.O404032232APA)
from
$9.86
Vacuum Check Valve
Cardone – Smog Air Pump (Part No.32-212)
from
$159.99
CARDONE Remanufactured Smog Pumps are engineered for quick installation and no comebacks. These pumps come with all necessary components for easy installation, while other brands leave out integral components, such as inlets and outlets that commonly break during installation. CARDONE engineers pay special attention to proper vane size and shape on each application to maintain proper flow, while other brands consolidate vane sizes for their own convenience.
Product Features:
See More
Product Features:
- 100% testing of all units guarantees reliable performance every time
- High temperature grease extends bearing life, resulting in longer pump life
- New carbon shoes/vanes on every unit ensure accurate air output to meet today’s stringent emissions standards
- Guaranteed fit and function
- Meets or exceeds O.E.M performance
Carquest Premium – Fuel Pump (Part No.E241087)
from
$175.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
Carquest Premium – Fuel Pump E3542567 (Part No.E3542567)
from
$249.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
Bosch – Relay (Part No.P202032107BOS)
from
$7.02
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket.
See More
Carquest Premium – Fuel Cap: 10810, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10810)
from
$9.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Fuel Cap: 10640, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10640)
from
$8.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Bosch – Fuel Dist Valve Kit (Part No.C20101700156BOS)
from
$306.42
Fuel Dist Valve Kit
Programa – Air Conditioning Amplifier, Rebuilt (Part No.R1141229987PRO)
from
$257.66
Air Conditioning Amplifier, Rebuilt
APA/URO Parts – Breather Hose (Part No.B201015636APA)
from
$13.41
Breather Hose
Febi – Breather Hose (Part No.B201014587FEB)
from
$14.05
Air hoses and lines for diesel and gasoline engines with additional blow-by for crankcase ventilation. Prefabricated modules in raw and clean air duct using injection-molded elastomer and plastic items, and blow-molded items.
Product Features:
See More
Product Features:
- Mount for temperature sensors
- Noise damping
- Folds and ribs for flexibility and vacuum stability
- Molded-on mounts for wires or cables
- Integrated flow divider
- Integrated positioning and attachment of prefabricated hose clamps
- Radial reinforcement for high vacuum stress in tight installation spaces
APA/URO Parts – Crankcase Breather Hose (Part No.B201028588APA)
from
$18.23
Air hoses and lines for diesel and gasoline engines with additional blow-by for crankcase ventilation. Prefabricated modules in raw and clean air duct using injection-molded elastomer and plastic items, and blow-molded items.
Product Features:
See More
Product Features:
- Mount for temperature sensors
- Noise damping
- Folds and ribs for flexibility and vacuum stability
- Molded-on mounts for wires or cables
- Integrated flow divider
- Integrated positioning and attachment of prefabricated hose clamps
- Radial reinforcement for high vacuum stress in tight installation spaces
CRP – Fuel Injector Seal (Part No.C101015426CRP)
from
$2.20
Fuel Injector Seal
CRP – Fuel Injector Seal (Part No.C101019205CRP)
from
$2.47
Fuel Injector Seal
Elring – Cold Start Valve Gasket (Part No.C400155249ELR)
from
$2.76
Cold Start Valve Gasket
Kayser – Vacuum Check Valve (Part No.O404032232KAY)
from
$23.71
Vacuum Check Valve
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Popular 1980 Mercedes-Benz 280SE Fuel and Emissions Systems Categories
1980 Mercedes-Benz 280SE Fuel and Emissions Systems
You count on your 1980 Mercedes-Benz 280SE to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 21 Fuel and Emissions Systems ranging in price from $2.20 to $306.42, you’re sure to find everything you need for your 1980 Mercedes-Benz 280SE.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 11 different brands like Delphi, Carquest Premium, and Bosch. 1980 Mercedes-Benz 280SE Fuel and Emissions Systems start as low as $2.20!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 6 extensive product reviews on 1980 Mercedes-Benz 280SE Fuel and Emissions Systems.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1980 Mercedes-Benz 280SE below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1980 Mercedes-Benz 280SE
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 Mercedes-Benz 280SE running right for years to come. In our inventory you’ll find brands like Delphi, Carquest Premium, Bosch, and even more.
Popular Cardone Fuel and Emissions Systems
You’ll find popular Cardone brand products across Smog Parts. All are waiting to get your 1980 Mercedes-Benz 280SE back on the road. Some of the top-rated Cardone products in these categories are:
Top-Rated Carquest Premium Fuel and Emissions Systems
If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 1980 Mercedes-Benz 280SE, and some of our most reviewed Carquest Premium parts include:
FAQs for 1980 Mercedes-Benz 280SE Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1980 Mercedes-Benz 280SE?
Out of 21 Fuel and Emissions Systems for the 1980 Mercedes-Benz 280SE, the most popular in our inventory are:
