1980 Lincoln Mark VI Intake Manifold Parts
More 1980 Lincoln Mark VI Intake Manifold Parts
Find your specific 1980 Lincoln Mark VI original or aftermarket Intake Manifold Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1980 Lincoln Mark VI Intake Manifold Parts
Edelbrock – RPM Air-Gap Dual-Quad Small Block Ford 351W Intake Manifold (Part No.7585)
from
$566.99
Air gap cooler and denser mixture for more power. Street and high performance compatible. Available in cast, polished and endurashine finish.
Product Features:
See More
Product Features:
- Based on C26 Low Profile with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- 1.625 in. Taller Than Low-Profile PN[5425]
- Also Available In EnduraShine Finish PN[75254]
- Also Available As Complete Kit PN[2025/20254]
- Best When Matched with Edelbrock 500cfm Carburetor
- Use Fuel Line Kit PN[8088/8091]
- Use Progressive Throttle Linkage Kit PN[7094]
Edelbrock – Single-Quad Manifold and carb Kit for Small-Block Ford 289-302 (Part No.2033)
from
$1053.99
The Edelbrock #2033 Single-Quad Manifold and carb kit is designed for Small-Block Ford 289-302 applications. With a Manifold and Carb Kit, it’s easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a
Product Features:
See More
Product Features:
- Satin Finish
- Single-Quad Manifold
- Thunder Series AVS2 800 cfm Carb
- RPM Air-Gap Manifold
- Made In The USA
Edelbrock – Performer Intake Manifold Small-Block Ford (Part No.3721)
from
$394.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock – Engine Intake Manifold Spacer #8728 For Manifold Part #2945, 3887 (Part No.8728)
from
$181.99Product Features:
- Fiber Laminate Spacers
- Provide Heat Insulation Between Upper and Lower
- Creates Cooler/Denser Charge
- Raise Intake 0.5in. For More Valve Cover Clearance
- Includes all Necessary Hardware for Installation
Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1083)
from
$19.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 90361)
from
$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Mr. Gasket – Intake Gasket (Part No.223)
from
$35.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. Comes complete with front & rear manifold end seals. For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Die-cut for an excellent fit
- Can be trimmed if necessary for modified port applications
- Complete with manifold end seals
- For OE replacement, high performance street, drag race and oval track use
Edelbrock – Intake replacement base and upper plenum gasket for #2945 & #3887 (Part No.7232)
Holley – SysteMAX; Intake Manifold Gasket (Part No.108-80)
from
$48.99
Kormetal gasket used between the SysteMax II Ford 5.0 liter upper and lower manifolds.
Product Features:
See More
Product Features:
- SysteMAX II Upper/Lower Manifold
Popular 1980 Lincoln Mark VI Intake Manifold Parts Categories
1980 Lincoln Mark VI Intake Manifold Parts
Maybe you’re in the middle of a full rebuild of that 1980 Lincoln Mark VI. Maybe you just need a couple of Intake Manifold Parts. Either way, Advance Auto Parts has 9 different Intake Manifold Parts in our inventory ranging from $19.99 to $1,053.99. That means you can find the exact parts or products you need to keep that 1980 Lincoln Mark VI running smoothly.
Intake Manifold Parts are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1980 Lincoln Mark VI. Felpro, Carquest Premium, and Holley are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Intake Manifold Parts for your 1980 Lincoln Mark VI, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Intake Manifold Parts to keep your 1980 Lincoln Mark VI rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Intake Manifold Parts Brands To Make Your 1980 Lincoln Mark VI Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1980 Lincoln Mark VI demands trusted brand parts and products to keep it running. Many trusted brands of Intake Manifold Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Mark VI the best it can be. Be sure to browse some of our top Intake Manifold Parts brands and parts.
Popular Holley Intake Manifold Parts
We carry Holley parts in our stock across Intake Manifold Gasket Sets categories, plus more. For a 1980 Lincoln Mark VI, our most popular Holley Intake Manifold Parts include:
Top 1980 Lincoln Mark VI Intake Manifold Parts from Felpro
Felpro products are another trusted brand when it comes to Intake Manifold Parts for your 1980 Lincoln Mark VI. Popular Felpro parts include:
FAQs for 1980 Lincoln Mark VI Intake Manifold Parts
What are the most purchased Intake Manifold Parts for the 1980 Lincoln Mark VI?
Out of 9 Intake Manifold Parts for the 1980 Lincoln Mark VI, the most popular in our inventory are:
from
$19.99
This product is not rated
Air Charge Temperature Sensor
Intake Manifold Temperature Sensors
from
$20.99
This product is not rated
Intake replacement base and upper plenum gasket for #2945 & #3887
Intake Manifold Gasket Sets
